根据中国知网引用及下载数据统计，本刊2024年度高影响力论文如下 :
序号
论 文
1
谢苗, 孟庆爽, 李博, 等. 融合短时傅里叶变换和卷积神经网络的托辊故障诊断方法[J]. 工程设计学报,
2024, 31(5): 565-574.
XIE M, MENG Q S, LI B, et al. Idler fault diagnosis method
fusing short-time Fourier transform and convolutional neural network[J].
Chinese Journal of Engineering Design, 2024, 31(5): 565-574.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-5-565.shtml
2
王飞, 陈向俊. 基于 Fast R-CNN 和 DeepLabV3+的变电站仪表盘示数自动识别方法[J]. 工程设计学报,
2024, 31(6): 750-756.
WANG F,
CHEN X J. Automatic recognition method for substation meter panel readings
based on Fast R-CNN and DeepLabV3+[J]. Chinese Journal of Engineering Design,
2024, 31(6): 750-756.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-6-750.shtml
3
谢海波, 洪昊岑, 王柏村, 等. 基于多目标遗传算法的斜盘式轴向柱塞泵低脉动结构优化设计[J]. 工程设计学报,
2024, 31(2): 160-167.
XIE H B,
HONG H C, WANG B C, et al. Low pulsation structural optimization design of
swashplate axial piston pump based on multi-objective genetic algorithm[J].
Chinese Journal of Engineering Design, 2024, 31(2): 160-167.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-2-160.shtml
4
马飞, 邵礼光, 徐君, 等. 基于小波包分解与随机森林的离心泵故障诊断[J]. 工程设计学报,
2024, 31(6): 741-749.
MA F,
SHAO L G, XU J, et al. Centrifugal pump fault diagnosis based on wavelet pack
decomposition and random forest[J]. Chinese Journal of Engineering Design,
2024, 31(6): 741-749.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-6-741.shtml
5
冀炳晖, 茅健, 钱波. 基于遗传算法-模糊PID的双喷头FDM型3D打印机温度控制方法[J]. 工程设计学报,
2024, 31(2): 151-159.
JI B H,
MAO J, QIAN B. Temperature control method for dual-nozzle FDM 3D printer
based on genetic algorithm-fuzzy PID[J]. Chinese Journal of Engineering
Design, 2024, 31(2): 151-159.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-2-151.shtml
6
俞青松, 徐向荣, 刘胤真. 基于Transformer的机器人像素级抓取位姿检测[J]. 工程设计学报,
2024, 31(2): 238-247.
YU Q S,
XU X R, LIU Y Z. Pixel-level grasping pose detection for robots based on
Transformer[J]. Chinese Journal of Engineering Design, 2024, 31(2): 238-247.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-2-238.shtml
7
吴勃夫, 吴姚烨, 贝璟, 等. 铸铝一体化车门的多目标可靠性优化设计[J]. 工程设计学报,
2024, 31(2): 188-200.
WU B F,
WU Y Y, BEI J, et al. Multi-objective reliability optimization design for
cast aluminum integrated car door[J]. Chinese Journal of Engineering Design,
2024, 31(2): 188-200
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-2-188.shtml
8
常佳辰, 韩亚丽, 孙翰, 等. 下肢康复外骨骼机器人设计与性能分析[J]. 工程设计学报,
2024, 31(2): 210-220.
CHANG J
C, HAN Y L, SUN H, et al. Design and performance analysis of lower limb
rehabilitation exoskeleton robot[J]. Chinese Journal of Engineering Design,
2024, 31(2): 210-220.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-2-210.shtml
9
汪启亮, 李永起, 刘通, 等. 气动扇形腔室软体弯曲驱动器的设计及分析[J]. 工程设计学报,
2024, 31(2): 221-229.
WANG Q
L, LI Y Q, LIU T, et al. Design and analysis of pneumatic sector chamber soft
bending driver[J]. Chinese Journal of Engineering Design, 2024, 31(2):
221-229.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-2-221.shtml
10
杨培, 张明路, 孙凌宇. 爬壁机器人磁吸附模块设计分析与结构参数优化[J]. 工程设计学报,
2024, 31(5): 592-602.
YANG P,
ZHANG M L, SUN L Y. Design analysis and structural parameter optimization for
magnetic adsorption module of wall-climbing robot[J]. Chinese Journal of
Engineering Design, 2024, 31(5): 592-602.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2024/1006-754X/1006-754X-2024-31-5-592.shtml
此外，2025年发表且在2025年当年已产生引用的论文有（仅列出10篇）:
序号
论 文
1
谢宇明, 尹汉锋, 肖慧慧. 基于领航-跟随及人工势场的环卫机器人编队研究[J]. 工程设计学报,
2025, 32(1): 42-50.
XIE M Y, YI H F, XIAO H H. Research on environmental
sanitation robot formation based on leader-follower and artificial potential
field[J]. Chinese Journal of Engineering Design, 2025, 32(1): 42-50
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-1-42.shtml
2
杜健, 祝锡晶, 李婧. 基于压电陶瓷驱动的二维精密定位平台设计及分析[J]. 工程设计学报,
2025, 32(2): 199-207.
DU J,
ZHU X J, LI J. Design and analysis of two-dimensional precision positioning platform
based on piezoelectric ceramic drive[J]. Chinese Journal of Engineering
Design, 2025, 32(2): 199-207.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-2-199.shtml
3
田立勇, 张佳豪, 于宁, 等. 掘进机回转台疲劳寿命预测及影响因素研究[J]. 工程设计学报,
2025, 32(1): 92-101.
TIAN
L Y, ZHANG J H, YU N, et al. Study on fatigue life prediction and influencing
factors of roadheader rotary platform[J]. Chinese Journal of Engineering
Design, 2025, 32(1): 92-101.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-1-92.shtml
4
魏晓华, 韩峰, 韩晓亮, 等. 复合式跳跃仿生机器人设计与分析[J]. 工程设计学报,
2025, 32(3): 334-345.
WEI X
H, HAN F, HAN X L, et al. Design and analysis of bionic robot with compound
jumping[J]. Chinese Journal of Engineering Design, 2025, 32(3): 334-345.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-3-334.shtml
5
韩伟涛, 温涛, 刘磊, 等. 基于Kresling折纸结构的软体管道机器人设计[J]. 工程设计学报,
2025, 32(1): 72-81.
HAN W
T, WEN T, LIU L, et al. Design of soft pipeline robot based on Kresling
origami structure[J]. Chinese Journal of Engineering Design, 2025, 32(1):
72-81.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-1-72.shtml
6
李三平, 王琦宇, 吴立国, 等. 成簇沙果采摘末端执行器的设计及实验研究[J]. 工程设计学报,
2025, 32(1): 51-61.
LI S P,
WANG Q Y, WU L G, et al. Design and experimental study of end-effector for
picking clustered crabapple[J]. Chinese Journal of Engineering Design, 2025,
32(1): 51-61.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-1-51.shtml
7
张旭辉, 杨骏豪, 杨文娟, 等. 基于双目视觉的掘进装备定位系统移站自主标定方法[J]. 工程设计学报,
2025, 32(1): 1-10.
ZHANG X
H, YANG J H, YANG W J, et al. Automatic calibration method for station
transfer in tunneling equipment positioning system based on binocular
vision[J]. Chinese Journal of Engineering Design, 2025, 32(1): 1-10.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-1-1.shtml
8
陈振, 陈能鹏, 冉庆杰, 等. 耦合焊接残余应力的横波可控震源振动器平板疲劳寿命预测[J]. 工程设计学报,
2025, 32(1): 102-111.
CHEN Z,
CHEN N P, RAN Q J, et al. Fatigue life prediction of sheer wave vibroseis
vibrator baseplate coupled with welding residual stress[J]. Chinese Journal
of Engineering Design, 2025, 32(1): 102-111.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-1-102.shtml
9
李佰霖, 马云帆, 陈昱锐, 等. 基于数字孪生的变压器热点温度预测预警技术研究[J]. 工程设计学报,
2025, 32(3): 281-295.
LI B L,
MA Y F, CHEN Y R, et al. Research on transformer hotspot temperature prediction
and warning technology based on digital twin[J]. Chinese Journal of
Engineering Design, 2025, 32(3): 281-295.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-3-281.shtml
10
徐美娟, 汪启亮, 洪永烽, 等. 嵌套余弦函数型多轴柔性铰链的设计与分析[J]. 工程设计学报,
2025, 32(2): 252-261.
XU M J,
WANG Q L, HONG Y F, et al. Design and analysis of nested cosine function type
multi-axis flexure hinge[J]. Chinese Journal of Engineering Design, 2025,
32(2): 252-261.
论文链接:
https://www.zjujournals.com/gcsjxb/article/2025/1006-754X/1006-754X-2025-32-2-252.shtml
