优化设计 |
|
|
|
|
电驱可控震源驱动电机匹配设计与优化研究 |
李琴( ),闫瑞,黄志强,李刚 |
西南石油大学 机电工程学院,四川 成都 610500 |
|
Research on matching design and optimization of drive motor of electric drive vibroseis |
Qin LI( ),Rui YAN,Zhiqiang HUANG,Gang LI |
School of Mechatronics Engineering, Southwest Petroleum University, Chengdu 610500, China |
引用本文:
李琴,闫瑞,黄志强,李刚. 电驱可控震源驱动电机匹配设计与优化研究[J]. 工程设计学报, 2023, 30(2): 172-181.
Qin LI,Rui YAN,Zhiqiang HUANG,Gang LI. Research on matching design and optimization of drive motor of electric drive vibroseis[J]. Chinese Journal of Engineering Design, 2023, 30(2): 172-181.
链接本文:
https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2023.00.020
或
https://www.zjujournals.com/gcsjxb/CN/Y2023/V30/I2/172
|
1 |
黄志强,李刚,丁雅萍,等. KZ-28型可控震源振动器平板性能有限元分析[J].机械科学与技术,2016,35(11):1673-1678. doi:10.13433/j.cnki.1003-8728.2016.1106 HUANG Z Q, LI G, DING Y P, et al. Finite element analysis for dynamic performances of KZ-28 vibroseis vibrator baseplate[J]. Mechanical Science and Technology for Aerospace Engineering, 2016, 35(11): 1673-1678.
doi: 10.13433/j.cnki.1003-8728.2016.1106
|
2 |
胡浩.解读新的土方机械噪声和安全强制性国家标准[J].中国标准化,2012(11):97-100. doi:10.3969/j.issn.1002-5944.2012.11.034 HU H. Interpretation of earth-moving machinery-noise limits and safety compulsory national standards[J]. China Standardization, 2012(11): 97-100.
doi: 10.3969/j.issn.1002-5944.2012.11.034
|
3 |
李琴,张凯,黄志强,等.可控震源绿色动力可行性探索[J].物探装备,2017,27(5):297-301,324. doi:10.3969/j.issn.1671-0657.2017.05.005 LI Q, ZHANG K, HUANG Z Q, et al. Feasibility study on green power of vibrator[J]. Equipment for Geophysical Prospecting, 2017, 27(5): 297-301, 324.
doi: 10.3969/j.issn.1671-0657.2017.05.005
|
4 |
刘细平,刘章麒,李亚,等.电动汽车用双层永磁体IPMSM优化分析[J].电机与控制学报,2017,21(10): 30-39. LIU X P, LIU Z Q, LI Y, et al. Optimization and analysis of IPMSM with double-layer permanent magnet used in electric vehicle[J]. Electric Machines and Control, 2017, 21 (10): 30-39.
|
5 |
董新伟,王一飞,杨磊.车用高性能永磁同步电机磁极设计综述[J].微电机,2019,52(11):97-100. doi:10.3969/j.issn.1001-6848.2019.11.020 DONG X W, WANG Y F, YANG L. A survey of magnetic pole design for high performance permanent magnet synchronous motors[J]. Micromotors, 2019, 52 (11): 97-100.
doi: 10.3969/j.issn.1001-6848.2019.11.020
|
6 |
赵艳娥,张建武.四轮驱动燃料电池汽车动力系统参数匹配与优化[J].汽车工程,2007(5):409-414,432. doi:10.3321/j.issn:1000-680X.2007.05.012 ZHAO Y, ZHANG J W. Parameter matching and optimization for the powertrain of a FWD fuel cell electric vehicle[J]. Automotive Engineering, 2007(5): 409-414, 432.
doi: 10.3321/j.issn:1000-680X.2007.05.012
|
7 |
刘灵芝,张炳力,汤仁礼.某型纯电动汽车动力系统参数匹配研究[J].合肥工业大学学报(自然科学版), 2007(5):591-593. LIU L Z, ZHANG B L, TANG R L. Matching of powertrain parameters of a pure electric vehicle[J]. Journal of Hefei University of Technology (Natural Science), 2007 (5): 591-593.
|
8 |
姬芬竹,高峰.电动汽车驱动电机和传动系统的参数匹配[J].华南理工大学学报(自然科学版),2006(4):33-37. doi:10.3321/j.issn:1000-565X.2006.04.008 JI F Z, GAO F. Matching of motor and powertrain parameters of electric vehicle[J]. Journal of South China University of Technology (Natural Science Edition), 2006(4): 33-37.
doi: 10.3321/j.issn:1000-565X.2006.04.008
|
9 |
谢颖,黎志伟,郭金鹏.电动汽车用高功率密度感应电机的设计与研究[J].电机与控制学报,2020,24(2):46-54. doi:10.15938/j.emc.2020.02.006 XIE Y, LI Z W, GUO J P. Design and research on high power density induction motor in electric vehicle[J]. Electric Machines and Control, 2020, 24(2): 46-54.
doi: 10.15938/j.emc.2020.02.006
|
10 |
王群京,周建,钱喆,等.优化对称性降低V形内置式永磁电机齿槽转矩[J].电机与控制学报,2020, 24(11):55-62. WANG Q J, ZHOU J, QIAN Z, et al. Optimizing symmetry to reduce the cogging torque of the V-type interior permanent magnet machines[J]. Electric Machines and Control, 2020, 24(11): 55-62.
|
11 |
王军年,刘健,初亮,等.电动汽车驱动电机结构参数优化设计[J].交通运输工程学报,2016,16(6):72-81. doi:10.3969/j.issn.1671-1637.2016.06.009 WANG J N, LIU J, CHU L, et al. Optimal design of driving motor structural parameters for electric vehicle[J]. Journal of Traffic and Transportation Engineering, 2016, 16(6): 72-81.
doi: 10.3969/j.issn.1671-1637.2016.06.009
|
12 |
邢泽智,王秀和,赵文良.基于不同极弧系数组合分段倾斜磁极的表贴式永磁同步电机齿槽转矩削弱措施研究[J].中国电机工程学报,2021,41(16):5737-5748. XING Z Z, WANG X H, ZHAO W L. Research on reduction methods of cogging torque based on segmented skewing magnetic poles with different combinations of pole-arc coefficients in surface-mounted permanent magnet synchronous motors[J]. Proceedings of the CSEE, 2021, 41(16): 5737-5748.
|
13 |
王淑旺,朱标龙,田旭,等.车用电机定子铁芯损耗的分析与计算[J].合肥工业大学学报(自然科学版),2016, 39(10):1311-1315. WANG S W, ZHU B L, TIAN X, et al. Analysis and calculation of stator core loss in vehicle motor[J]. Journal of Hefei University of Technology (Natural Science), 2016, 39(10): 1311-1315.
|
14 |
TAO D, ZHOU K L, LÜ F, et al. Magnetic field characteristics and stator core losses of high-speed permanent magnet synchronous motors[J]. Energies, 2020, 13(3): 535.
|
15 |
XU Y, AI M, XU Z, et al. Research on interior permanent magnet synchronous motor based on performance matching of electric bus[J]. IEEE Transactions on Applied Superconductivity, 2021, 31(8): 1-4.
|
16 |
ZHAO F, YU Z J, CAO J, et al. Design and optimization of a high-speed permanent magnet synchronous machine for gas compressors[J]. IEEE Transactions on Magnetics, 2022, 58(2): 1-5.
|
17 |
HU Y, ZHU S, LIU C, et al. Electromagnetic performance analysis of interior PM machines for electric vehicle applications[J]. IEEE Transactions on Energy Conversion, 2018, 33(1): 199-208.
|
18 |
胡明辉,谢红军,秦大同.电动汽车电机与传动系统参数匹配方法的研究[J].汽车工程,2013,35(12):1068-1073. doi:10.3969/j.issn.1000-680X.2013.12.004 HU M H, XIE H J, QIN D T. A study on the parameter matching between the motor and transmission system of an electric vehicle[J]. Automotive Engineering, 2013, 35(12): 1068-1073.
doi: 10.3969/j.issn.1000-680X.2013.12.004
|
19 |
SUN X, SHI Z, LEI G, et al. Analysis and design optimization of a permanent magnet synchronous motor for a campus patrol electric vehicle[J]. IEEE Transactions on Vehicular Technology, 2019, 68(11): 10535-10544.
|
20 |
陈振,李涛,薛晓伟,等.基于模糊综合评价法的可控震源振动器平板疲劳可靠性分析与优化[J].工程设计学报,2021,28(4):415-425. doi:10.3785/j.issn.1006-754X.2021.00.061 CHEN Z, LI T, XUE X W, et al. Fatigue reliability analysis and optimization of vibroseis vibrator baseplate based on fuzzy comprehensive evaluation method[J]. Chinese Journal of Engineering Design, 2021, 28(4): 415-425.
doi: 10.3785/j.issn.1006-754X.2021.00.061
|
21 |
王光德,王春强,曹文娟,等.可控震源低频振动和液压流量的关联浅析[J].物探装备,2021,31(3):182-184. doi:10.3969/j.issn.1671-0657.2021.03.013 WANG G D, WANG C Q, CAO W J, et al. An analysis of the correlation between low frequency vibration of vibrator and hydraulic flow[J]. Equipment for Geophysical Prospecting, 2021, 31(3): 182-184.
doi: 10.3969/j.issn.1671-0657.2021.03.013
|
22 |
张亚梅,王永芳,李燕兵,等.一种可控震源的驱动系统设计[J].物探装备,2022,32(1):13-16,20. doi:10.3969/j.issn.1671-0657.2022.01.004 ZHANG Y M, WANG Y F, LI Y B, et al. Drive system design for a kind of vibrator[J]. Equipment for Geophysical Prospecting, 2022, 32(1): 13-16, 20.
doi: 10.3969/j.issn.1671-0657.2022.01.004
|
23 |
卓亮,孙鲁,施道龙,等.考虑温度变化的高温高速永磁电机转子涡流损耗半解析模型及实验验证[J].中国电机工程学报,2021,41(24):8305-8315. ZHUO L, SUN L, SHI D L, et al. Semi-analytical model and experimental verification of rotor eddy current loss of high temperature high speed permanent magnet machine considering temperature change[J]. Proceedings of the CSEE, 2021, 41(24): 8305-8315.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|