Please wait a minute...
工程设计学报  2011, Vol. 18 Issue (6): 457-462    
工程设计理论、方法与技术     
航空活塞发动机曲轴配重组件失效机理研究
 吴 江
中国民航飞行学院 飞机修理厂,四川 广汉 618307
Research on failure mechanism of reciprocating aeroengine 
crankshaft counterweight-components
 WU  Jiang
Aircraft Repair & Overhaul Plant, Civil Aviation Flight University of China, Guanghan   618307, China
 全文: PDF(2176 KB)   HTML
摘要: 某型飞机在使用过程中,多次发生配重组件破损,滚柱飞出而击伤发动机,严重威胁飞行安全.为分析配重组件破损的原因,基于配重的工作原理,分析了发动机油门快速操纵对曲轴扭转振动的影响,依据扭纵耦合理论,对滚柱冲击挡片的机理进行了研究,并完成了试验验证.建立了配重组件在冲击载荷作用下的有限元计算模型,并对配重组件进行了机械性能测试,采用疲劳强度安全系数法,完成了配重组件的强度分析.研究结果表明,发动机油门的快速操纵引起配重摆动角度过大,配重为非线性摆动,其摆动频率与曲转扭转振动频率差异过大,配重消除曲轴扭转振动效果差,曲轴产生剧烈的扭转共振,扭转振动耦合成轴向振动,造成滚柱高频冲击挡片.在冲击载荷作用下,挡片的疲劳强度最小,最易发生疲劳破损,可适当改善其疲劳强度,提高配重组件不发生疲劳破损的可靠性.
关键词: 发动机配重失效分析振动冲击有限元    
Abstract: In a certain airplane working process, it often happened that counterweight-components fractured, the roller flied out and damaged engine, which was a serious threat to flight safety. In order to analyze the cause of counterweight-components fracture, the impact of rapid manipulation of engine throttle on crankshaft torsional vibration was analyzed base on working principle of counterweight. The mechanism of roller impact washer was studied based on coupled torsional axial vibration theory and the experiment verification has been completed. The finite element calculation model of counterweight-components with impact load was established, the mechanical properties of counterweight-components was tested, and the strength analysis of counterweight-components has been completed based on safety factor method of fatigue strength. Research results show that the rapid manipulation of engine throttle causes excessive swing-angle of counterweight, which works in nonlinear swing. The counterweight swing frequency and the crankshaft torsional vibration frequency are greatly different, so the effect of the counterweight eliminating crankshaft torsional vibration is poor. The crankshaft generates strong torsional vibration, and this vibration is coupled as crankshaft axial vibration, causing the roller generate high frequency shock to washer. Under impact load, the fatigue strength of washer is the smallest in counterweight-components, fatigue fracture easily happens in washer. Appropriate improve of washer fatigue strength is in favor of avoiding fatigue fracture and improving reliability of counterweight-components
Key words: engine    counterweight    failure analysis    vibration    impact    FEM
出版日期: 2011-12-28
:  V 263.6  
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
吴江

引用本文:

吴江. 航空活塞发动机曲轴配重组件失效机理研究[J]. 工程设计学报, 2011, 18(6): 457-462.

WU Jiang. Research on failure mechanism of reciprocating aeroengine 
crankshaft counterweight-components[J]. Chinese Journal of Engineering Design, 2011, 18(6): 457-462.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I6/457

[1] 余乐,侯勇俊,赵永强,汪玉琪. 双异步电机驱动双质体振动系统同步滑模控制[J]. 工程设计学报, 2023, 30(5): 608-616.
[2] 谢超,陈云壮,石光楠,赖磊捷. 正交簧片型大行程柔性球铰设计及柔度分析[J]. 工程设计学报, 2023, 30(5): 626-633.
[3] 谢章伟,张兴波,徐哲,张羽,张丰云,王茜,王萍萍,孙树峰,王海涛,刘纪新,孙维丽,曹爱霞. 基于数字孪生的激光加工零件表面温度监控系统的构建[J]. 工程设计学报, 2023, 30(4): 409-418.
[4] 谢博伟,金莫辉,杨洲,段洁利,屈明宇,李锦辉. 3D打印TPU材料的力学性能及模型参数研究[J]. 工程设计学报, 2023, 30(4): 419-428.
[5] 张涛,王开松,唐威,秦可成,刘阳,石雨豪,邹俊. 电流体泵驱动的柔性弯曲执行器的设计及分析[J]. 工程设计学报, 2023, 30(4): 467-475.
[6] 李琴,闫瑞,黄志强,李刚. 电驱可控震源驱动电机匹配设计与优化研究[J]. 工程设计学报, 2023, 30(2): 172-181.
[7] 李毅,陈国华,夏铭,李波. 电主轴冷却系统设计与仿真优化[J]. 工程设计学报, 2023, 30(1): 39-47.
[8] 涂文兵,袁晓文,杨锦雯,杨本梦. 不同元件故障状态下滚动轴承的动态特性研究[J]. 工程设计学报, 2023, 30(1): 82-92.
[9] 李三平,孙腾佳,袁龙强,吴立国. 气动软体采摘机械手设计及实验研究[J]. 工程设计学报, 2022, 29(6): 684-694.
[10] 赵致勃,顾大强,李立新,张靖. 基于接触应力优化的摆线轮修形设计[J]. 工程设计学报, 2022, 29(6): 713-719.
[11] 张正峰,宋小雨,袁晓磊,陈文娟,张伟东. Al/CFRP混合薄壁结构耐撞性能可靠性优化设计[J]. 工程设计学报, 2022, 29(6): 720-730.
[12] 李琴,蒲伟,黄志强,席御僖,李刚,王若豪. 川渝地区可控震源道路激振效果分析[J]. 工程设计学报, 2022, 29(6): 766-775.
[13] 张姚,祝效华,董亮亮. 弱刚性机匣橡胶减振柔性夹具研究[J]. 工程设计学报, 2022, 29(5): 587-594.
[14] 黄志强,杨仁松,李刚,李涛,黄琴,叶闯. 大型往复压缩机主机振动分析与测试研究[J]. 工程设计学报, 2022, 29(4): 465-473.
[15] 孙光明,王奕苗,万仟,弓堃,汪文津,赵坚. 考虑装配变形的精密机床床身优化设计[J]. 工程设计学报, 2022, 29(3): 318-326.