Please wait a minute...
Chinese Journal of Engineering Design  2005, Vol. 12 Issue (1): 55-57    DOI:
    
Optimization and selection of air-conditioning heat and cold sources based on grey relational analysis
 LI  Yang-Chun1, LIU  Li-Hua2
1. Department of Capital Construction, Zhejiang University, Hangzhou 310027, China;
2.College of Civil Engineering and Architecture,Zhejiang University of Sciences, Hangzhou 310012, China
Download: HTML     PDF(224KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Adopting the grey relational analysis, this paper established evaluation model for the optimization and selection of air-conditioning engineering design. By taking the assessment with several air-conditioning design schemes, this paper also presented the optimal scheme.

Key wordsgrey relational analysis      air conditioning      heat and cold sources      optimization     
Published: 28 February 2005
Cite this article:

LI Yang-Chun, LIU Li-Hua. Optimization and selection of air-conditioning heat and cold sources based on grey relational analysis. Chinese Journal of Engineering Design, 2005, 12(1): 55-57.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2005/V12/I1/55


基于灰色关联分析法的空调冷热源优化选择

利用灰色关联分析方法建立了空调工程设计方案优化选择的数学模型,以某建筑物空调冷热源方案为例进行分析,得出了优化方案。

关键词: 灰色关联分析,  空调,  冷热源,  优化 
[1] Xiaoqiang ZHANG,Biwei LU,Jiaqin LIU,Yucheng WU. Topology optimization design and steady-state thermal analysis of fusion reactor divertor[J]. Chinese Journal of Engineering Design, 2023, 30(5): 601-607.
[2] Baicun WANG,Kailing ZHU,Jinsong BAO,Feng WANG,Haibo XIE,Huayong YANG. Intelligent design and scheduling optimization of painted body storage based on digital pedestal system[J]. Chinese Journal of Engineering Design, 2023, 30(4): 399-408.
[3] Jindong WANG,Yuhong XIE,Yi CHEN,Zhanyang WU. Biomimetic design of hammer pieces for hammer mill based on beaver incisors[J]. Chinese Journal of Engineering Design, 2023, 30(4): 476-484.
[4] Zhimin GUO,Haishu DAI,Jiang ZHAI,Haocen HONG,Baicun WANG,Haibo XIE,Huayong YANG. Distributed co-simulation and dynamic optimization of axial piston pump based on FMI[J]. Chinese Journal of Engineering Design, 2023, 30(4): 495-502.
[5] Fangjian DOU,Qingying QIU,Cheng GUAN,Jinjie SHAO,Haifeng WU. Optimization design of acceleration and deceleration curve of winding machine with large moment of inertia[J]. Chinese Journal of Engineering Design, 2023, 30(4): 503-511.
[6] Yumin HE,Ying HAN,Jing ZHOU. Research on adaptive sliding mode control of tower crane based on improved fruit fly optimization algorithm[J]. Chinese Journal of Engineering Design, 2023, 30(3): 271-280.
[7] Dong ZHANG,Pei YANG,Zhexuan HUANG,Lingyu SUN,Minglu ZHANG. Design and optimization of pendulous magnetic adsorption mechanism for wall-climbing robots[J]. Chinese Journal of Engineering Design, 2023, 30(3): 334-341.
[8] Xiaofei ZHENG,Zhenhai HUANG,Xiaolong MA,Jianxin WANG,Binrui WANG. Structure optimization and analysis of pole-climbing robot based on SIMP method[J]. Chinese Journal of Engineering Design, 2023, 30(3): 342-352.
[9] Qin LI,Rui YAN,Zhiqiang HUANG,Gang LI. Research on matching design and optimization of drive motor of electric drive vibroseis[J]. Chinese Journal of Engineering Design, 2023, 30(2): 172-181.
[10] Junliang FAN,Li XIAO,Yueting LUO,Gang CHEN,Xiaolin QU,Yi TANG,Hengxiang GONG. Optimization design and implementation of atomization assisted CVD cavity[J]. Chinese Journal of Engineering Design, 2023, 30(2): 182-188.
[11] Peng-cheng ZHANG,Jian-ye NIU,Cheng-lei LIU,Jing-ke SONG,Li-peng WANG,Jian-jun ZHANG. Mechanism parameter optimization and trajectory planning of traction lower limb rehabilitation robot[J]. Chinese Journal of Engineering Design, 2022, 29(6): 695-704.
[12] Zheng-feng ZHANG,Xiao-yu SONG,Xiao-lei YUAN,Wen-juan CHEN,Wei-dong ZHANG. Reliability optimization design for crashworthiness of Al/CFRP hybrid thin-walled structure[J]. Chinese Journal of Engineering Design, 2022, 29(6): 720-730.
[13] Jiang LIU,Zheng-ming XIAO,Long-long ZHANG,Wei-biao LIU. Transmission accuracy reliability analysis and parameter optimization of RV reducer considering cycloid gear wear[J]. Chinese Journal of Engineering Design, 2022, 29(6): 739-747.
[14] Wen-hao ZHANG,Chuan-wen BAN,Song-mei LI. Parameter optimization of stirring screw for two-component composite coatings based on discrete element method[J]. Chinese Journal of Engineering Design, 2022, 29(5): 547-554.
[15] Zhi-qiang HUANG,Zhi-yong WANG,Shan HUANG,Fei-hu QIN,Jin YANG. Heat dissipation analysis and layout optimization of skid mounted module system of shale gas compressor[J]. Chinese Journal of Engineering Design, 2022, 29(5): 555-563.