Please wait a minute...
工程设计学报  2011, Vol. 18 Issue (2): 87-92    
工程设计理论、方法与技术     
冲击压路机减振系统的参数化仿真研究
 智晋宁, 张洪, 李捷
太原科技大学 机械电子工程学院,山西 太原 030024
Parametric simulation study on the cushioning system of impact roller
 ZHI  Jin-Ning, ZHANG  Hong, LI  Jie
School of Mechanical and Electronical Engineering, Taiyuan University of Science & Technology, Taiyuan 030024, China
 全文: PDF(2139 KB)   HTML
摘要: 为了减小冲击压路机作业时引起的冲击与振动,仿真研究了减振系统参数对作用于牵引车的冲击载荷的影响特性.通过分析冲击压路机的结构和作业特点,建立了减振系统的动力学方程.在UG软件中建立整机的实体模型,然后将其导入多体动力学仿真软件ADAMS中,建立包含轮胎与地面的动力学模型,在典型工况下仿真了整机的动力学特性,将仿真结果与试验数据对比,验证了模型的正确性.通过参数化设计研究方法将模型参数化,仿真分析了减振系统的刚度、阻尼参数变动时牵引载荷的变化,获得了参数影响的灵敏度曲线和载荷曲线,给出了参数值的合理范围.结果表明,系统的第1级阻尼和第2级刚度对牵引载荷的影响较大,整机仿真模型能够模拟冲击压路机的实际工况,为工程优化提供参考.
关键词: 冲击压路机减振ADAMS建模仿真    
Abstract: In order to decrease the impact and vibration induced by impact roller during its working, the characteristics of influence of the cushioning system's parameters on the impact load acted on the tractor were studied by simulation. The dynamic equations of cushioning system were established through analyzing the structure and work performance of the impact roller. The solid model of the whole machine was set up in UG software and was transformed into ADAMS that is multi\|body dynamic simulation software. The dynamic model was established with the tire and the road, and the dynamic characteristics of the whole machine were simulated under typical work conditions. The simulation results were compared with test data, which validates the correctness of the simulation model. Utilizing parametric design research method, the model was parameterized and the variations of traction load were simulated and analyzed when the system's stiffness and damping parameters changed. The sensitivity curves and load curves were achieved and the rational ranges of parameters were presented. The results show that the first level damper and the second level stiffness have much greater effect upon the traction load than the other parameters, and the whole machine's simulation model is able to simulate the work condition of impact roller and provides the references for eng
Key words: impact roller    cushioning    ADAMS    modeling    simulation
出版日期: 2011-04-28
:  TP 302  
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
智晋宁
张洪
李捷

引用本文:

智晋宁, 张洪, 李捷. 冲击压路机减振系统的参数化仿真研究[J]. 工程设计学报, 2011, 18(2): 87-92.

ZHI Jin-Ning, ZHANG Hong, LI Jie. Parametric simulation study on the cushioning system of impact roller[J]. Chinese Journal of Engineering Design, 2011, 18(2): 87-92.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2011/V18/I2/87

[1] 赵迪,陈果,陈小利,王熊锦. 轮式搜救机器人地形自适应机构设计及越障性能分析[J]. 工程设计学报, 2023, 30(5): 579-589.
[2] 王柏村,朱凯凌,鲍劲松,王峰,谢海波,杨华勇. 基于数字底座的涂装车身缓存区智能设计与调度优化[J]. 工程设计学报, 2023, 30(4): 399-408.
[3] 谢章伟,张兴波,徐哲,张羽,张丰云,王茜,王萍萍,孙树峰,王海涛,刘纪新,孙维丽,曹爱霞. 基于数字孪生的激光加工零件表面温度监控系统的构建[J]. 工程设计学报, 2023, 30(4): 409-418.
[4] 谢博伟,金莫辉,杨洲,段洁利,屈明宇,李锦辉. 3D打印TPU材料的力学性能及模型参数研究[J]. 工程设计学报, 2023, 30(4): 419-428.
[5] 郭志敏,戴海曙,翟江,洪昊岑,王柏村,谢海波,杨华勇. 基于FMI的轴向柱塞泵分布式联合仿真与动态优化[J]. 工程设计学报, 2023, 30(4): 495-502.
[6] 刘少杰,李志海,刘治翔,邹康. 基于激光扫描和三维栅格地图的掘进巷道空间建模方法研究[J]. 工程设计学报, 2023, 30(3): 306-314.
[7] 杨展,李其朋,唐威,秦可成,陈岁繁,王铠迪,刘阳,邹俊. 小型陆空变形两栖机器人的设计与分析[J]. 工程设计学报, 2023, 30(3): 325-333.
[8] 张栋,杨培,黄哲轩,孙凌宇,张明路. 爬壁机器人悬摆式磁吸附机构的设计与优化[J]. 工程设计学报, 2023, 30(3): 334-341.
[9] 陈贵亮,李子浩,蔡超,李永超,杨冬. 基于人体动力学分析的下肢外骨骼助力设计及机构优化[J]. 工程设计学报, 2023, 30(3): 362-371.
[10] 李洋波,蔡改贫,阮辽. 对辊破碎机对钨矿石的层压破碎特性研究[J]. 工程设计学报, 2023, 30(2): 212-225.
[11] 徐诗洋,吴炳晖,纪冬梅,戴新宇. 电力隧道自动巡检机器人设计与运动仿真[J]. 工程设计学报, 2023, 30(1): 32-38.
[12] 李毅,陈国华,夏铭,李波. 电主轴冷却系统设计与仿真优化[J]. 工程设计学报, 2023, 30(1): 39-47.
[13] 芮宏斌,李路路,王天赐,段凯文. 两栖仿海龟机器人动力学建模与运动控制研究[J]. 工程设计学报, 2023, 30(1): 73-81.
[14] 涂文兵,袁晓文,杨锦雯,杨本梦. 不同元件故障状态下滚动轴承的动态特性研究[J]. 工程设计学报, 2023, 30(1): 82-92.
[15] 张旭,赖磊捷,朱利民. 超精密大行程麦克斯韦磁阻驱动器磁场建模与推力分析[J]. 工程设计学报, 2022, 29(6): 748-756.