机械工程 |
|
|
|
|
基于有限元法的谐波双圆弧齿廓设计和修形 |
曾星宇( ),李俊阳*( ),王家序,唐挺,李聪 |
重庆大学 机械传动国家重点实验室,重庆 400044 |
|
Design and modification of harmonic double circular arc tooth profile based on finite element method |
Xing-yu ZENG( ),Jun-yang LI*( ),Jia-xu WANG,Ting TANG,Cong LI |
State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China |
引用本文:
曾星宇,李俊阳,王家序,唐挺,李聪. 基于有限元法的谐波双圆弧齿廓设计和修形[J]. 浙江大学学报(工学版), 2021, 55(8): 1548-1557.
Xing-yu ZENG,Jun-yang LI,Jia-xu WANG,Ting TANG,Cong LI. Design and modification of harmonic double circular arc tooth profile based on finite element method. Journal of ZheJiang University (Engineering Science), 2021, 55(8): 1548-1557.
链接本文:
https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2021.08.016
或
https://www.zjujournals.com/eng/CN/Y2021/V55/I8/1548
|
1 |
M. H. 伊万诺夫. 谐波齿轮传动[M]. 沈允文, 李克美, 译. 北京: 国防工业出版社, 1987.
|
2 |
沈允文, 叶庆泰. 谐波齿轮传动的理论和设计[M]. 北京: 机械工业出版社, 1985.
|
3 |
王迪. 一种新型结构的谐波减速器研究[D]. 哈尔滨: 哈尔滨工业大学, 2009. WANG Di. Research on a new structure of harmonic reducer[D]. Harbin: Harbin Institute of Technology, 2009.
|
4 |
SAHOO V, MAITI R Load sharing by tooth pairs in involute toothed harmonic drive with conventional wave generator cam[J]. Meccanica, 2018, 53 (1): 373- 394
|
5 |
WANG S, JIANG G D, MEI X S, et al A rapid stress calculation method for short flexspline harmonic drive[J]. Engineering Computations, 2019, 36 (6): 1852- 1867
doi: 10.1108/EC-08-2018-0364
|
6 |
高海波, 李志刚, 邓宗全, 等 基于ANSYS的杯形柔轮结构参数对柔轮应力的敏感度分析[J]. 机械工程学报, 2010, 46 (5): 1- 7 GAO Hai-bo, LI Zhi-gang, DENG Zong-quan, et al Sensitivity analysis of cup-shaped flexible wheel structure parameters to flexible wheel stress based on ANSYS[J]. Journal of Mechanical Engineering, 2010, 46 (5): 1- 7
doi: 10.3901/JME.2010.05.001
|
7 |
董惠敏, 李德举, 齐书学, 等 基于正交试验和有限元分析的谐波传动柔轮杯体结构优化[J]. 机械传动, 2013, 37 (1): 34- 38 DONG Hui-min, LI De-ju, QI Shu-xue, et al Optimization of cup body structure of harmonic drive flexspline based on orthogonal experiment and finite element analysis[J]. Mechanical Transmission, 2013, 37 (1): 34- 38
|
8 |
辛洪兵 双圆弧谐波齿轮传动基本齿廓设计[J]. 中国机械工程, 2011, 22 (6): 656- 662 XIN Hong-bing Design for basic rack of harmonic drive with double-circular-arc tooth profile[J]. China Mechanical Engineering, 2011, 22 (6): 656- 662
|
9 |
沈允文 论谐波齿轮传动的齿形[J]. 齿轮, 1986, (4): 51- 56 SHEN Yun-wen On the tooth profile of harmonic gear transmission[J]. Gear, 1986, (4): 51- 56
|
10 |
王家序, 周祥祥, 李俊阳, 等 公切线式双圆弧齿廓谐波齿轮传动设计[J]. 湖南大学学报:自科版, 2016, 43 (2): 56- 63 WANG Jia-xu, ZHOU Xiang-xiang, LI Jun-yang, et al Design of common tangent double circular arc tooth profile harmonic gear transmission[J]. Journal of Hunan University: Self Science Edition, 2016, 43 (2): 56- 63
|
11 |
ISHIKAWA S, TAKIZAWA N. Wave gear drive with contin- uous meshing, high ratcheting torque tooth pro-file: USA, 7694607 B2 [P]. (2010-04-13).
|
12 |
王家序, 周祥祥, 李俊阳, 等 杯形柔轮谐波传动三维双圆弧齿廓设计[J]. 浙江大学学报: 工学版, 2016, 50 (4): 616- 624 WANG Jia-xu, ZHOU Xiang-xiang, LI Jun-yang, et al Three -dimensional double arc tooth profile design of cup-shaped flexible wheel harmonic drive[J]. Journal of Zhejiang University: Engineering Science Edition, 2016, 50 (4): 616- 624
|
13 |
张立勇, 刘新猛, 王长路, 等 径向变形量对谐波减速器啮合特性及柔轮应力的影响分析[J]. 机械传动, 2017, 41 (9): 166- 169 ZHANG Li-yong, LIU Xin-meng, WANG Chang-lu, et al Analysis of the influence of radial deformation on the meshing characteristics and flexspline stress of harmonic reducer[J]. Mechanical Transmission, 2017, 41 (9): 166- 169
|
14 |
吴上生, 孙韩磊, 杨琪, 等 谐波传动柔轮空间齿廓设计与制造工艺[J]. 华南理工大学学报: 自然科学版, 2019, 47 (1): 32- 38 WU Shang-sheng, SUN Han-lei, YANG Qi, et al Design and manufacturing technology of flexspline's spatial tooth profile in harmonic drive[J]. Journal of South China University of Technology: Natural Science Edition, 2019, 47 (1): 32- 38
|
15 |
蒋倩倩, 弓安, 李晓峰, 等 谐波传动中凸轮径向变形量对齿廓修形的影响[J]. 机械传动, 2019, 43 (6): 1- 5 JIANG Qian-qian, GONG An, LI Xiao-feng, et al The influence of cam radial deformation on tooth profile modification in harmonic drive[J]. Mechanical Transmission, 2019, 43 (6): 1- 5
|
16 |
CHEN Xiao-xia, LIU Shu-zhong, XING Jing-zhong, et al The parametric design of double-circular-arc tooth profile and its influence on the functional backlash of harmonic drive[J]. Mechanism and Machine Theory, 2014, 73 (1): 1- 24
|
17 |
周卫东. 渐开线谐波齿轮传动齿廓参数优化及动态仿真[D]. 大连: 大连理工大学, 2008. ZHOU Wei-dong. Tooth profile parameter optimization and dynamic simulation of involute harmonic gear transmission[D]. Dalian: Dalian University of Technology, 2008.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|