Please wait a minute...
浙江大学学报(工学版)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
    
Bullwhip effect control based on average dwell time method
QIU Xiang1, SONG Hai yu2, YU Li1
1. College of Information Engineering, Zhejiang University of Technology, Hangzhou 310023, China;2. College of Information, Zhejiang University of Finance and Economics, Hangzhou 310018, China
Download:   PDF(960KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  
The bullwhip effect control problem was analyzed for the supply chain system. Considering the fact that the decision information for order compensating may be lost or not, the bullwhip effect control problem of the supply chain systems was converted to a stabilization problem of a class of switched systems with two subsystems. A sufficient condition was provided by using the average dwell time method in order to ensure that the supply chain inventory system is exponentially stable. The order compensation controller and the weighted matrix of the inventory fluctuation were designed by solving a set of linear matrix inequalities. An illustrative example was provided to demonstrate the effectiveness of the proposed order compensation control strategy in controlling the bullwhip effect for supply chain systems.

Published: 29 October 2015
CLC:  TP 273  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

QIU Xiang, SONG Hai yu, YU Li. Bullwhip effect control based on average dwell time method. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(10): 1909-1915.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008 973X.2015.10.012     OR     http://www.zjujournals.com/eng/Y2015/V49/I10/1909


基于平均驻留时间方法的牛鞭效应稳定化控制

研究供应链库存系统中的牛鞭效应抑制问题.针对实际生产中订单波动补偿决策信息的可获得和不可获得2种情况,把对供应链库存系统中牛鞭效应的抑制转化为一类含有2个子系统的切换系统稳定化控制问题.采用平均驻留时间方法,给出一个充分条件,使所得的供应链库存波动切换系统指数稳定.通过求解一组线性矩阵不等式,给出订单补偿控制增益和库存波动信息权重矩阵的设计方法.通过仿真算例验证了所得的订单补偿控制策略能够有效地抑制供应链库存网络系统中的牛鞭效应.
［1］ BENDINER J. Understanding supply chain optimization ［J］. APICS The Performance Advantage, 1998, 1: 34-40.
［2］ CROSON R, DONOHUE K. Behavioral causes of the bullwhip effect and the observed value of inventory information ［J］. Management Science, 2006, 52(3): 323-336.
［3］ DEJONCKHEERE J, DISNEY S M, LAMBRECHT M R, et al. The impact of information enrichment on the bullwhip effect in supply chains: a control engineering perspective ［J］. European Journal of Operational Research, 2004, 153(3): 727-750.
［4］ 汪传旭,崔建新.ARMA(1,1)需求条件下需求信息延迟对两级供应链牛鞭效应和平均成本的影响［J］.系统管理学报,2007, 16(3): 332-336.
WANG Chuan xu, CUI Jian xin. Impact of demand information delay on order variation and average cost in a two stage supply chain with ARMA(1,1) demand ［J］. Journal of Systems and Management, 2007, 16(3): 332-336.
［5］ BAGANHA M, COHEN M. The stabilizing effect on inventory in supply chains ［J］. Operational Research, 1998, 46(3): 572-583.
［6］ 黄小原,卢震.供应链牛鞭效应的H∞控制应用研究［J］. 控制与决策, 2002, 18(2): 155-158.
HUANG Xiao yuan, LU Zhen. Application of H∞ control strategies of bullwhip effect in supply chain ［J］. Control and Decision,2002, 18(2): 155-158.
［7］ 唐亮,靖可.H∞鲁棒控制下动态供应链系统牛鞭效应优化［J］.系统工程理论与实践, 2012, 32(1): 155-163.
TANG Liang, JING Ke. Bullwhip effect optimization of dynamic supply chain system based on H∞ robust control ［J］. Systems Engineering: Theory and Practice, 2012, 32(1): 155-163.
［8］ 李翀,刘思峰.信息共享受限条件下的供应链网络系统牛鞭效应控制策略［J］. 控制与决策, 2012, 27(12): 1787-1792.
LI Chong, LIU Si feng. Bullwhip effect control strategy in supply chain networks with limited information sharing ［J］. Control and Decision, 2012, 27(12): 1787-1792.
［9］ LI C. Controlling the bullwhip effect in a supply chain system with constrained information flows ［J］. Applied Mathematical Modeling, 2013, 37(4): 1897-1909.
［10］ LI C, LIU S F. A robust optimization approach to reduce the bullwhip effect of supply chains with vendor order placement lead time delays in an uncertain environment ［J］. Applied Mathematical Modeling, 2013, 37(3): 707-718.
［11］ GARCIA C, IBEAS A, VILANOVA R. A switched control strategy for inventory control of the supply chain ［J］. Journal of Process Control, 2013, 23(6): 868-880.
［12］ FU D, IONESCU C, AGHEZZAF E, et al. Decentralized and centralized model predictive control to reduce the bullwhip effect in supply chain management ［J］. Computers and Industrial Engineering, 2014, 73: 21-31.
［13］ HESPANHA J, MORSE A. Stability of switched systems with average dwell time ［C］∥Proceeding of the 38th IEEE Conference on Decision and Control. Phoenix: IEEE, 1999: 2655-2660.
［14］ ZHANG W, YU L. Output feedback stabilization of networked control systems with packet dropouts ［J］. IEEE Transactions on Automatic Control, 2007, 52(9): 1705-1710.
［15］ ZHANG L, BOUKAS E K, SHI P. Exponential H∞ filtering for uncertain discrete time switched linear systems with average dwell time: a μ dependent approach ［J］. International Journal of Robust and Nonlinear Control, 2008, 18(11): 1188-1207.
［16］ ZHAO X, ZHANG L, SHI P, et al. Stability of switched positive linear systems with average dwell time switching ［J］. Automatica, 2012, 48(6): 1132-1137.
［17］ ZHAI G S, HU B, YASUDA K, et al. Qualitative analysis of discrete time switched systems ［C］∥Proceeding of the 2002 American Control Conference. Anchorage: IEEE, 2002: 1880-1885.
[1] WANG Qing, YU Xiao guang, Qiao Ming jie, ZHAO An an, CHENG Liang, LI Jiang xiong, KE Ying lin. Rapid calibration based on SQP algorithm for coordinate frame of localizers[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(2): 319-327.
[2] ZHOU Feng, GU Lin yi, LUO Gao sheng, CHEN Zong heng. Adaptive backstepping sliding mode control for electro hydraulic proportional propulsion system[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(6): 1111-1118.
[3] JIN Xin, LIANG Jun. Multivariable offset free model predictive control in dynamic PLS framework[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(4): 750-758.
[4] JIA Chi qian, FENG Dong qin. Security assessment for industrial control systems based on fuzzy analytic hierarchy process[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(4): 759-765.
[5] FEI Shao hua, LIU Dan, QIAO Ming jie, ZHANG Ming，FANG Qiang. Synchronous control system design of dual drive end frame executed platform[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(1): 85-92.
[6] SONG Zhi qiang, ZHOU Xian zhong, LI Hua xiong. Coordinated stalking tracking for multiple unmanned ground vehicles[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(12): 2349-2354.
[7] WANG Ri jun, BAI Yue, XU Zhi jun, GONG Xun, ZHANG Xin, TIAN Yan tao. Fuzzy self adjusting tracking control based on disturbance observer for airborne platform mounted on multi rotor unmanned aerial vehicle[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(10): 2005-2012.
[8] QIN Zhan-bin, CHEN Fei-fei, JIN Bo, ZHANG Lu-lu. PID auto tuning method for spool position control of electro hydraulic proportional valve[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(8): 1503-1508.
[9] SUN Wen-da, LI Ping, FANG Zhou. Time-delay uncertain robust optimal control on unmanned helicopter based on dynamic inversion[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(7): 1326-1334.
[10] DOU Ya-dong, WANG Qing, LI Jiang-xiong, KE Ying-lin. Data integration for aircraft digital assembly system[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(5): 858-865.
[11] TAO Guo-liang, ZUO He, LIU Hao. Structure design and motion control of parallel platform driven by pneumatic muscles and air cylinder[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(5): 821-828.
[12] LUO Zhong-hai, MENG Xiang-lei, BA Xiao-fu, FEI Shao-hua, FANG Qiang. Design on hybrid force position control of large aircraft components posture alignment platform[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(2): 265-274.
[13] LUO Gao-sheng, GU Lin-yi, LI Lin. Robust adaptive control of elbow based on robust observer[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(10): 1758-1766.
[14] FANG Qiang, ZHOU Qing-hui, FEI Shao-hua, MENG Xiang-lei, BA Xiao-fu, ZHANG Yan-ni, KE Ying-lin. Pneumatic servo control system design for pressure foot of an end-effector[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(8): 1442-1450.
[15] QU Wei-wei, SHI Xin, DONG Hui-yue, FENG Pu-jia,ZHU Ling-sheng, KE Ying-lin. Simulation and test on process of percussive Impact riveting[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(8): 1411-1418.