避免强迫装配和提升效率的预连接工艺规划

doi:10.3785/j.issn.1008-973X.2016.08.019

浙江大学学报(工学版)

机械与电气工程

避免强迫装配和提升效率的预连接工艺规划

曲巍崴, 唐伟, 毕运波, 李少波, 罗水均

1.浙江大学机械工程学院流体动力与机电系统国家重点实验室, 浙江杭州 310027;

2.中航成飞民用飞机有限责任公司,四川成都 610037

Pre-joining processes plan to avoid forced assemblies and improve efficiency

QU Wei wei, TANG Wei, BI Yun bo, LI Shao bo, LUO Shui jun

1.The State Key Laboratory of Fluid Power Transmission and Control, College of Mechanical Engineering, Zhejinag University, Hangzhou 310029, China;
2. Chengdu civil aircraft Co.,Ltd, Chengdu 610037,China

全文: PDF(1819 KB) HTML

摘要：

为了解决传统预连接工艺理论依据缺乏、强迫装配经常存在、效率差异显著的问题,提出一种避免强迫装配和提升效率的预连接工艺规划模型.以引起强迫装配的零件配合面不匹配误差和生产资源调度路径为约束,将壁板划分为若干个相互联系的典型单元,联合构建典型单元之间的关联工艺子模型和典型单元内部工艺子模型.通过一个大型壁板预连接实例验证了该模型的有效性.结果表明：该模型不但有效避免了零件配合面不匹配误差引起的强迫装配,而且给出了提高生产资源调度效率的方法,优化后的调度效率相对于初值提升了29%,预连接数量减少了25%,这为预连接规范操作提供了理论依据.

Abstract:

A pre-joining process planning model with avoiding forced assemblies and improving efficiency to solve the problems that the traditional pre-joining processes lack theory evidence, the forced assemblies and the significantly-different efficiency. On account of that the mismatch error of mating surface of parts arising forced assemblies and that the scheduling path of production resources as constraints, the panel was divide into some interconnected typical units;the associated process sub-model between typical units and internal process sub-modelfor a typical unit was combinedly built, respectively.The effectiveness of model was verified by an example of large panel. As a result,the proposed model can not only effectively avoid the forced assemblies caused by the mismatch error of mating surface of parts, but also present an approach for increasing the scheduling efficiency of production resources.The scheduling efficiency after optimization was improved by 29%relative to the initial value andthe number of pre-joining decreases by 25%, which provides a theoretical evidence for the pre-joining standardized operations.

出版日期: 2016-08-01

基金资助:

国家自然科学基金资助项目 (51305395,51275463)；民用飞机专项科研资助项目（MJZ-G-2011-07）.

作者简介: 曲巍崴(1981—),女,副研究员,从事飞机数字化装配等研究.ORCID： 0000-0002-5345-6891. E-mail: qwwwwl@zju.edu.cn

	服务
	把本文推荐给朋友
	加入引用管理器
	E-mail Alert
	RSS
	作者相关文章

引用本文:

曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.08.019.

QU Wei wei, TANG Wei, BI Yun bo, LI Shao bo, LUO Shui jun. Pre-joining processes plan to avoid forced assemblies and improve efficiency. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.08.019.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.08.019 或 http://www.zjujournals.com/eng/CN/Y2016/V50/I8/1561

［1］艾小祥,俞慈君,方强,等.基于遗传算法的机翼壁板扫描路径优化.浙江大学学报：工学版,2015, 49(3): 448-456.

AI Xiaoxiang, YU Cijun, FANG Qiang, et al. Optimized scanning path of wing panel based on genetic algorithm\[J\]. Journal of Zhejiang University ：Engineering Science, 2015, 49(3): 448-456.

［2］费少华,方强,孟祥磊,等.基于压脚位移补偿的机器人制孔锪窝深度控制.浙江大学学报：工学版, 2012, 46(7): 1157-1161.

FEI Shaohua, FANG Qiang, MENG Xianglei, et al. Countersink depth control of robot drilling based on pressure foot displacement compensation \[J\]. Journal of Zhejiang University ：Engineering Science, 2012, 46(7): 1157-1161.

［3］ LI Y, CHENG H, ZHANG K F. GAAAbased layout method of locating points for aero thinwalled structure automated riveting ［J］. Advanced Materials Research, 2012, 433: 489-496.

［4］ LIU G, TANG W, KE Y L, et al. Modeling of fast prejoining processes optimization for skinstringer panels ［J］. Assembly Automation, 2014, 34(4): 323-332.

［5］ LIU G, TANG W, KE Y L, et al. Prejoining process planning model for a batch of skin–stringer panels based on statistical clearances ［J］. International Journal of Advanced Manufacturing Technology, 2015, 78(1): 41-51.

［6］毕运波,吴原骅,朱伟东,等.飞机叠层结构预联接工艺优化［J］. 浙江大学学报:工学版, 2015, 49(11): 2040-2046.

BI Yunbo, WU Yuanhua, ZHU Weidong, et al. Pre connected process optimization of aircraft stacks［J］. Journal of Zhejiang University: Engineering Science, 2015, 49(11): 2040-2046.

［7］ CHENG H, LI Y, ZHANG K F, et al.Variation modeling of aeronautical thinwalled structures with multistate riveting ［J］. Journal of Manufacturing Systems, 2011, 30(2): 101-115.

［8］ CHENG H, WANG R X, LI Y, et al. Modeling and analyzing of variation propagation in aeronautical thinwalled structures automated riveting ［J］. Assembly Automation, 2012, 32(1): 25-37.

［9］ CHENG H, LI Y, ZHANG KF, et al. Efficient method of positioning error analysis for aeronautical thinwalled structures multistate riveting ［J］. International Journal of Advanced Manufacturing Technology, 2011,55(1/4): 217-233.

［10］ LU K B, ZHANG X L, JING M Q, et al. Optimization of machining parameters in turning processes by dynamic programming［C］∥5th Annual Dynamic Systems and Control Division Conference / 11th JSME Motion and Vibration Conference. Fort Lauderdale, Florida, USA: ASME, 2012: 687-694.

［11］ ZHANG Y W, GUO C, CHEN X, et al. Approximate dynamic programming of continuous annealing process［C］∥IEEE International Conference on Automation and Logistics. Shenyang: IEEE, 2009,13: 353-358.

［12］陈佳佳,丁永生,梁霄,等.碳纤维拉伸工艺优化多目标动态规划方法［J］.材料导报,2011,25(3):127-130.

CHEN Jiajia, DING Yongshen, LIANG Xia, et al. Carbon fiber drawing process optimization based on multiobjective dynamic programming ［J］. Materials review, 2011, 25(3): 127-130.

［13］王志红,杜平安,郭志龙,等.基于遗传算法与动态规划法的工艺过程优化［J］.电子科技大学学报, 2007, 36(1): 146-149.

WANG Zhihong, DU Pingan, GUO Zhilong, et al. Process planning optimization based on genetic algorithm and dynamic programming method ［J］. Journal of Electronic Science and Technology University, 2007, 36(1): 146-149.

［14］曹振新,朱云龙,李富明.混流轿车总装配线的动态规划与仿真优化研究［J］..计算机集成制造系统,2006,12(4): 526-532.

CAO Zhenxin, ZHU Yunlong,LI Fuming.Research on dynamic planning and simulation optimization of mixed model general automobile assembly lines［J］. Computer Integrated Manufacturing Systems, 2006, 12(4): 526-532.

［15］莫愿斌, 陈德钊,胡上序.粒子群复形法求解旅行商问题［J］. 浙江大学学报：工学版, 2007, 41(3): 369-373.

MO Yuanbin, CHEN Dezhao, HU Shangxu. Complex particle swarm optimization algorithm for solving travelling salesman problem ［J］. Journal of Zhejiang University ：Engineering Science, 2007, 41(3): 369-373.

［16］熊鹰,匡亚萍.施工项目工期成本优化问题的蚁群算法\[J\].浙江大学学报：工学版,2007, 41(1): 176-180.

XIONG Ying, KUANG Yaping. Using ant colony algorithm to solve construction timecost tradeoff problem \[J\]. Journal of Zhejiang University ：Engineering Science, 2007, 41(1): 176-180.

［17］尹嘉男,胡明华,张洪海,等.独立离场模式下多跑道时空资源优化调度方法［J］.航空学报,2015,36(5):1574-1584.

YIN Jianan, HU Minghua, ZHANG Honghai, et al. Optimized method for multirunway spatiotemporal resource scheduling in the mode of independent departures ［J］. Acta Aeronautica et Astronautica Sinica, 2015, 36(5): 1574-1584.

［18］宋锋,温卫东,崔海涛. 基于改进蚁群算法的结构形状优化［J］. 航空学报, 2007, 28(5): 1110-1115.

SONG Feng, WEN Weidong, CUI Haitao. Structural shape optimization based on an improved ant colony algorithm ［J］. Acta Aeronautica et Astronautica Sinica, 2007, 28(5): 1110-1115.

［19］史峰, 王辉, 郁磊,等.Matlab智能算法30个案例分析［M］. 北京: 北京航空航天大学出版社,2011.

SHI Feng, WANG Hui, YU Lei, et al .Matlab intelligent algorithms of 30 case studies ［M］ Beijing: Beijing University of Aeronautics and Astronautics Press,2011.

[1]	董凯, 赖俊英, 钱晓倩, 詹树林, 阮方. 夏热冬冷地区居住建筑水平式外遮阳节能效果[J]. 浙江大学学报(工学版), 2016, 50(8): 1431-1437.
[2]	李佳琦, 范利武, 俞自涛. 超亲水表面在淬火冷却过程中的沸腾传热特性[J]. 浙江大学学报(工学版), 2016, 50(8): 1493-1498.
[3]	江衍铭, 张建全, 明焱. 集合神经网络的洪水预报[J]. 浙江大学学报(工学版), 2016, 50(8): 1471-1478.
[4]	钟崴, 彭梁, 周永刚, 徐剑, 从飞云. 基于小波包分析和支持向量机的锅炉结渣诊断[J]. 浙江大学学报(工学版), 2016, 50(8): 1499-1506.
[5]	夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[6]	李林玉, 吴张华, 余国瑶, 戴巍, 罗二仓. 直线压缩机电声转换特性的实验[J]. 浙江大学学报(工学版), 2016, 50(8): 1529-1536.
[7]	胡小东, 顾临怡, 张范蒙. 应用于数字变量马达的高速开关阀[J]. 浙江大学学报(工学版), 2016, 50(8): 1551-1560.
[8]	杨姝, 刘国平, 亓昌, 王大志. 金属空心球梯度泡沫结构抗冲击特性仿真与优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1593-1599.
[9]	杨章, 童根树, 张磊. 对称布置2根单侧加劲肋的有效刚度[J]. 浙江大学学报(工学版), 2016, 50(8): 1446-1455.
[10]	蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁抗火性能试验[J]. 浙江大学学报(工学版), 2016, 50(8): 1463-1470.
[11]	单华峰, 夏唐代, 俞峰, 胡军华, 潘金龙. 地下增层开挖托换桩的屈曲稳定临界荷载分析[J]. 浙江大学学报(工学版), 2016, 50(8): 1425-1430.
[12]	辜天来,张帅,郑耀. 咽式进气道/等直隔离段的反压特性[J]. 浙江大学学报(工学版), 2016, 50(7): 1418-1424.
[13]	程时伟, 陆煜华, 蔡红刚. 移动设备眼动跟踪技术[J]. 浙江大学学报(工学版), 2016, 50(6): 1160-1166.
[14]	郑成志, 高金良, 何文杰. 基于FastICA算法的物理漏损流量分析模型[J]. 浙江大学学报(工学版), 2016, 50(6): 1031-1039.
[15]	黄家辉, 冯冬芹. 广义收益信息物理系统脆弱性评估方法[J]. 浙江大学学报(工学版), 2016, 50(6): 1119-1125.

Viewed

Full text

Abstract

Cited

Shared

Discussed