Please wait a minute...
浙江大学学报(工学版)
土木与交通工程     
耐火钢-混凝土组合梁抗火性能试验
蒋翔, 童根树, 张磊
浙江大学 建筑工程学院,浙江 杭州,310058
Experiments on fire-resistance performance of fire-resistant steel-concrete composite beams
JIANG Xiang, TONG Gen shu, ZHANG Lei
College of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China
 全文: PDF(2044 KB)   HTML
摘要:

进行2个防火涂料厚度不同的耐火钢-混凝土组合梁试件,以及1个同等条件下的普通钢-混凝土组合梁试件作为对照组的抗火试验.测量炉温、组合梁沿截面高度不同测点的温度、组合梁跨中竖向挠度.试验结果表明:可取跨中挠度达到梁跨的1/30作为简支耐火钢-混凝土组合梁达到耐火极限状态的界限.防火涂料厚度为15 mm的耐火钢-混凝土组合梁耐火极限时间为93 min,比相同条件下的普通钢-混凝土组合梁耐火极限时间64 min提高了45.3%;当防火涂料厚度为25 mm时,耐火钢-混凝土组合梁的耐火极限时间为132 min,超过中国规范(GB50016:2014)中梁一级防火的要求.在一定的火灾和荷载等条件下,采用相同强度等级耐火钢的钢-混凝土组合梁具有更好的抗火性能,可减小建筑物的防火涂层厚度.

Abstract:

Fire resistance tests were carried out on 2 fire-resistant steel-concrete composite beams (FRSCCB)with different thicknesses of fire fireproof coating, and 1 conventional structural steel-concrete composite beam(CSSCCB) under the same conditions as a control group. The furnace temperature, the temperature distribution along the composite beam sections and the mid-span deflection were measured. The test results show that the simply supported FRSCCB reaches its fire limit state when the mid-span deflection reaches 1/30 of the span. The fire-resistance time of the first set FRSCCB with 15 mm fireproof coating is 93 min and exceeds the fire-resistance time of CSSCCB which is 64 min more than 45.3%.The fire-resistance time of the FRSCCB with 25 mm fireproof coating is 132 min, which surpasses the Grade 1 beam fire-resistance requirement according to Chinese code GB50016: 2014. In conclusion, the fireresistant steel can be used to improve the fire resistance performance of steel-concrete composite beams and to decrease the thickness of fire proof coating.

出版日期: 2016-08-01
:     
基金资助:

国家科技支撑计划资助项目(2012BAJ13B04).

通讯作者: 童根树,男,教授,博导. ORCID: 0000-0002-3985-8429.     E-mail: tonggs@zju.edu.cn
作者简介: 蒋翔(1989—),男,博士生,从事钢结构稳定性和抗火等研究. ORCID: 0000-0002-9164-3452. E-mail: civilj@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁抗火性能试验[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.08.006.

JIANG Xiang, TONG Gen shu, ZHANG Lei. Experiments on fire-resistance performance of fire-resistant steel-concrete composite beams. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.08.006.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.08.006        http://www.zjujournals.com/eng/CN/Y2016/V50/I8/1463

[1] 童根树.钢结构设计方法[M].北京:中国建筑工业出版社,2007: 158-162.
[2] 王卫永, 李国强. 钢混凝土组合梁抗火性能研究综述 [J].建筑钢结构进展,2014, 16(5): 18.
WAN Weiyong, LI Guoqiang. A stateoftheart review on fire resistance of steelconcrete composite beams [J]. Progress in Steel Building Structures, 2014, 16(5): 18.
[3] 李国强,周宏宇.钢混凝土组合梁抗火性能试验研究[J].土木工程学报,2007, 40(10): 19-26.
LI Guoqiang, ZHOU Hongyu. Experimental study on the fireresistance of steelconcrete composite beams [J]. China Civil Engineering Journal, 2007, 40(10): 1926.
[4] 李国强,丁军.耐火钢梁的抗火性能参数分析与抗火设计[J].钢结构,2003,18(5): 52-55.
LI Guoqiang, DING Jun. Parametric studies and firesafety design of fireresistant steel beams [J]. Steel Construction, 2003, 18(5): 52-55.
[5] 完卫国,吴结才.耐火钢的开发与应用综述[J].建筑材料学报,2006,9(2): 183-189.
WAN Weiguo, WU Jiecai. Review of research and applications of fireresistant steel [J]. Journal of Building Materials, 2006, 9(2): 183-189.
[6] 王泽林,王文仲,郝森.建筑结构用耐火钢的耐火极限试验[J].钢结构,2004,19(4): 56-58.
WANG Zelin,WANG Wenzhong,HAO Sen. Fire resistance test of fire resistant steel for building [J]. Steel Structure,2004, 19(4): 56-58.
[7] CHIJIIWA R, YOSHIDA Y, UEMORI R, et al. Development and practical application of fire resistant steel for buildings \[J\]. Nippon Steel Technical Report(Japan), 1993, 58: 47-55.
[8] SAKUMOTO Y, SAITO H. Firesafe design of modern steel buildings in Japan \[J\]. Journal of Constructional Steel Research, 1995, 33(1): 101-123.
[9] SAKUMOTO Y, YAMAGUCHI T, OHASHI M, SAITO H. Hightemperature Properties of fireresistant steel for buildings [J]. Journal of Structural Engineering, ASCE, 1992, 118(2): 392-407.
[10] SAKUMOTO Y, YAMAGUCHI T, OKADA T. Fire resistance of fireresistant steel columns [J]. Journal of Structural Engineering, ASCE, 1994, 120(4): 110-321.
[11] SAKUMOTO Y, NISHIDA I. Experimental study on fire resistance of fireresistant steel beams [J]. Fire Science and Technology, 1998, 18(1):19.
[12] SAKUMOTO Y, OKADA T, YOSHIDA M Y et al. Fire resistance of concretefilled, fireresistant steeltube columns [J]. Journal of Materials in Civil Engineering, 1994, 6(2): 169-184.
[13] DING Jun, LI Guoqiang, SAKUMOTO Y. Parametric studies on fire resistance of fireresistant steel members[J]. Journal of Constructional Steel Research, 2004, 60: 1007-1027.
[14] 蒋首超,陆立新,李国强,等.马钢耐火钢高温下材料性能试验研究[J].土木工程学报,2006,39(8): 72-75.
JIANG Shouchao, LU Lixin, LI Guoqiang, et al. An experimental study on hightemperature properties of fireresistant steel made by Masteel [J]. China Civil Engineering Journal, 2006, 39(8): 72-75.
[15] 李国强,陆立新,蒋首超,等.马钢耐火钢柱的抗火试验与设计验算[J].建筑钢结构进展,2006,8(4): 12-16.
LI Guoqiang, LU Lixin, JIANG Shouchao, et al. Fireresistant experiments and theoretical calculations of fireresistant steel columns [J].Progress in Steel Building Structures, 2006, 8(4): 12-16.
[16] 刘逸祥,童根树,张磊.耐火钢圆钢管混凝土柱耐火极限和承载力[J].浙江大学学报:工学版,2015,49(2): 208-217.
LIU Yixiang, TONG Genshu, ZHANG Lei. Fire resistance and loadbearing capacity of concrete filled fireresistant steel tubular columns with circular crosssection [J]. Journal of Zhejiang University: Engineering Science, 2015, 49(2): 208-217.
[17] GB500162006.建筑设计防火规范[S].北京:中国计划出版社,2006.
GB500162006. Code for fire protection design of building [S]. Bei Jing: China Planning Press, 2006.
[18] GB/T99782008.建筑构件耐火试验方法[S]. 北京:中国标准出版社,2008.
GB/T99782008. FireResistance TestsElements of Building Construction [S]. Bei Jing: Standards Press of China, 2008.
[19] 傅宇方,黄玉龙,潘智生,等.高温条件下混凝土爆裂机理研究进展[J].建筑材料学报,2006, 9(3): 323-329.
FU Yufang,WONG Yuklung,POON Chisun,et al. Literature review of study on mechanism of explosive spalling in concrete at elevated temperatures [J]. Journal of Building Materials, 2006, 9(3): 323-329.
[20] CECS200: 2006.建筑钢结构防火技术规范[S].北京:中国计划出版社,2006.
CECS200: 2006. Technical Code for fire safety of steel structure in buildings [S]. Bei Jing: China Planning Press, 2006.
 
[1] 董凯, 赖俊英, 钱晓倩, 詹树林, 阮方. 夏热冬冷地区居住建筑水平式外遮阳节能效果[J]. 浙江大学学报(工学版), 2016, 50(8): 1431-1437.
[2] 李佳琦, 范利武, 俞自涛. 超亲水表面在淬火冷却过程中的沸腾传热特性[J]. 浙江大学学报(工学版), 2016, 50(8): 1493-1498.
[3] 江衍铭, 张建全, 明焱. 集合神经网络的洪水预报[J]. 浙江大学学报(工学版), 2016, 50(8): 1471-1478.
[4] 钟崴, 彭梁, 周永刚, 徐剑, 从飞云. 基于小波包分析和支持向量机的锅炉结渣诊断[J]. 浙江大学学报(工学版), 2016, 50(8): 1499-1506.
[5] 夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[6] 李林玉, 吴张华, 余国瑶, 戴巍, 罗二仓. 直线压缩机电声转换特性的实验[J]. 浙江大学学报(工学版), 2016, 50(8): 1529-1536.
[7] 曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 2016, 50(8): 1561-1569.
[8] 胡小东, 顾临怡, 张范蒙. 应用于数字变量马达的高速开关阀[J]. 浙江大学学报(工学版), 2016, 50(8): 1551-1560.
[9] 杨姝, 刘国平, 亓昌, 王大志. 金属空心球梯度泡沫结构抗冲击特性仿真与优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1593-1599.
[10] 杨章, 童根树, 张磊. 对称布置2根单侧加劲肋的有效刚度[J]. 浙江大学学报(工学版), 2016, 50(8): 1446-1455.
[11] 单华峰, 夏唐代, 俞峰, 胡军华, 潘金龙. 地下增层开挖托换桩的屈曲稳定临界荷载分析[J]. 浙江大学学报(工学版), 2016, 50(8): 1425-1430.
[12] 辜天来,张帅,郑耀. 咽式进气道/等直隔离段的反压特性[J]. 浙江大学学报(工学版), 2016, 50(7): 1418-1424.
[13] 程时伟, 陆煜华, 蔡红刚. 移动设备眼动跟踪技术[J]. 浙江大学学报(工学版), 2016, 50(6): 1160-1166.
[14] 郑成志, 高金良, 何文杰. 基于FastICA算法的物理漏损流量分析模型[J]. 浙江大学学报(工学版), 2016, 50(6): 1031-1039.
[15] 黄家辉, 冯冬芹. 广义收益信息物理系统脆弱性评估方法[J]. 浙江大学学报(工学版), 2016, 50(6): 1119-1125.