Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
机械工程     
零件质量在机测量系统综合评价体系
王连生, 徐月同, 蒋钧海, 徐冠华
1. 浙江大学 浙江省先进制造技术重点实验室,浙江 杭州 310027|
2. 苏州紫金港智能制造装备有限公司,江苏 昆山 215300|
3. 浙江大学昆山创新中心,江苏 昆山 215300
Comprehensive evaluation system for on machine measurement system of parts quality
WANG Lian sheng, XU Yue tong, JIANG Jun hai, XU Guan hua
1.Zhejiang Province Key Lab of Advanced Manufacturing Technology, Zhejiang University, Hangzhou 310027,  China|
2. Suzhou Zijingang Intelligent Manufacturing Equipment Co.Ltd, Kunshan 215300, China|
3. Zhejiang University Kunshan Innovation Institute, Kunshan 215300, China
 全文: PDF(995 KB)   HTML
摘要：

通过分析制造标准差和测量系统标准差及其比值这3个指标在不同情况的接受准则,构建综合评价体系区间分布图.根据测量数据在区间分布图的区域分布,分析制造系统过程能力、测量系统测量能力和测量精度,判定在机测量系统是否可行,并提出改进意见.将提出的零件质量在机测量系统综合评价体系,应用于自主研发的电机端盖自动化生产线的在机内径检测与评价.改进后的过程能力指数提高到1.18,测量能力为11.29%,测量精度为9.64%,自动化生产线具有较高的生产效率和经济性,满足产品批量生产的要求.结果表明:在机测量系统综合评价体系在对零件自动化生产线测量系统的评价方面具有很好的可行性和实用性.
Abstract:

Firstly, the manufacturing standard deviation, the standard deviation of measurement system and the ratio between them in different situations were calculated. And the comprehensive evaluation system interval distribution chart was obtained. Secondly, the process capability of manufacturing system, measurement capability and measurement accuracy were analyzed according to the position of measurement data in the comprehensive evaluation system interval distribution chart. Also, the improvement suggestions were given. Finally, the comprehensive evaluation system was applied for detection and evaluation of the inner diameter of the motor cover manufactured by selfdeveloped motor cover automated production line. After improvements, the process capability index increases to 1.18, the measurement capability achieves 11.29%, and the measurement accuracy achieves 9.64%.The automated production lines have high efficiency and economy, meeting product requirements of mass production. Results show that comprehensive evaluation system for onmachine measurement system has good feasibility and practicality in evaluation of measurement system for automated production line.
出版日期: 2016-06-01
:     
基金资助:

江苏省自然科学基金青年资助项目(BK20150397).
通讯作者: 徐月同，男，副教授. ORCID: 0000000157023527.     E-mail: xyt@zju.edu.cn
作者简介: 王连生（1992—），男，硕士生，从事高端数控机床研究. ORCID: 0000000169238293.E-mail: wls42539@126.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

王连生, 徐月同, 蒋钧海, 徐冠华. 零件质量在机测量系统综合评价体系[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008973X.2016.06.011.

WANG Lian sheng, XU Yue tong, JIANG Jun hai, XU Guan hua. Comprehensive evaluation system for on machine measurement system of parts quality. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008973X.2016.06.011.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2016.06.011    或    http://www.zjujournals.com/eng/CN/Y2016/V50/I6/1088

［1］ 张伦彦.面向工业4.0的精益生产线设计和实施方法［J］.航空制造技术,2014(18): 44-47.
ZHANG Lunyan. Design and implementation methods of industrie 4.0 oriented lean production line ［J］. Aeronautical Manufacturing Technology,2014(18): 44-47.
［2］ SHISHEBORI D, HAMADANI A Z. Properties of multivariate process capability in the presence of gauge measurement errors and dependency measure of process variables ［J］. Journal of Manufacturing Systems, 2010, 29(1): 10-18.
［3］ WU C W. Using a novel approach to assess process performance in the presence of measurement errors ［J］. Journal of Statistical Computation and Simulation, 2011, 81(3): 301-314.
［4］ MONTGOMERY D C, RUNGER G C. Gauge capability and designed experiments. Part I: basic methods ［J］. Quality Engineering, 1993, 6(1): 115-135.
［5］ PEARN W L, WANG F K, YEN C H. Multivariate capability indices: distributional and inferential properties ［J］. Journal of Applied Statistics, 2007, 34(8): 941-962.
［6］ PEARN W L, LIAO M Y, YEN C H. Estimating and testing process precision with presence of gauge measurement errors ［J］. Quality and Quantity, 2007, 41(5): 757-777.
［7］ COSTA F B, CASTAGLIOLA P. Effect of measurement error and autocorrelation on the (X) overbar chart ［J］. Journal of Applied Statistics, 2011, 38(4): 661-673.
［8］ PEARN W L, LIAO M Y. Measuring process capability based on CPK with gauge measurement errors ［J］. Microelectronics Reliability, 2005, 45(3/4): 739-751.
［9］ 王旭辉.测量系统误差对过程质量的影响［D］.天津：天津大学,2009.
WANG Xuhui. Effect of error of the measurement system for process quality ［D］. Tianjin: Tianjin University,2009.
［10］ 马义中,徐颖强.测量系统波动源的分析、控制和软件设计［J］.机械科学与技术,2002, 21(1): 9293,139.
MA Yizhong, XU Yingqiang. Analysis and control of variation sources and software design for measurement system ［J］. Mechanical Science and Technology, 2002, 21(1): 9293,139.
［11］ 汤淑明,王飞跃.过程能力指数综述［J］.应用概率统计,2004, 20(2): 207-216.
TANG Shuming, WANG Feiyue. Recent development in process capability indices ［J］. Applied Probability and Statistics, 2004, 20(2): 207-216.
［12］ 李玉玲.基于过程能力指数的工序质量控制研究［D］.重庆：重庆大学,2008.
LI Yuling. Research on process quality control based on process capability indices ［D］. Chongqing: Chongqing University, 2008.
［13］ 王海宇,徐济超,杨剑锋,等.测量系统误差对过程监控效果影响分析［J］.航空精密制造技术, 2006, 42(2): 15-18.
WANG Haiyu, XU Jichao, YANG Jianfeng, et al.Analysis of the effect of measurement system errors on monitoring performance of control charts ［J］. Aviation Precision Manufacturing Technology, 2006, 42(2): 15-18.
［14］ 白旭.测量系统分析(MSA)在计量工作中的应用［J］.计量与测试技术,2007, 34(9): 58-59.
BAI Xu. Application of measurement systems analysis to metrology ［J］. Metrology and Measurement Technique, 2007, 34(9): 58-59.
［15］ WOODALL W H, BORROR C M. Some relationships between gage R&R criteria ［J］. Quality and Reliability Engineering International, 2008, 24(1): 99-106.
［16］ 陈宏.测量系统分析在实验设备质量评价中的应用［J］.实验室研究与探索,2011,11: 172-176.
CHEN Hong. Application of MSA in quality evaluation of experimental devices ［J］. Research and Exploration in Laboratory, 2011,11: 172-176.
［17］ 杨军,丁文兴,马小兵,等.统计质量控制［M］.北京：中国标准出版社,2012: 1617.
［18］ 贾楠.统计过程控制中控制图在企业质量管理中的应用研究［D］.天津：天津大学,2013.
JIANan. Application of SPCs control chart in quality management ［D］. Tianjin ：Tianjin University,2013.
［19］ 汪鹏. 测量系统波动源分离与监控技术的研究及应用［D］.南京：南京理工大学, 2006: 1.
WANG Peng. Research and application of measurement system fluctuation source separation and monitoring technology ［D］. Nanjing: Nanjing University, 2006: 1.
[1] 杨章, 童根树, 张磊. 对称布置2根单侧加劲肋的有效刚度[J]. 浙江大学学报(工学版), 2016, 50(8): 1446-1455.
[2] 蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁抗火性能试验[J]. 浙江大学学报(工学版), 2016, 50(8): 1463-1470.
[3] 单华峰, 夏唐代, 俞峰, 胡军华, 潘金龙. 地下增层开挖托换桩的屈曲稳定临界荷载分析[J]. 浙江大学学报(工学版), 2016, 50(8): 1425-1430.
[4] 董凯, 赖俊英, 钱晓倩, 詹树林, 阮方. 夏热冬冷地区居住建筑水平式外遮阳节能效果[J]. 浙江大学学报(工学版), 2016, 50(8): 1431-1437.
[5] 李佳琦, 范利武, 俞自涛. 超亲水表面在淬火冷却过程中的沸腾传热特性[J]. 浙江大学学报(工学版), 2016, 50(8): 1493-1498.
[6] 江衍铭, 张建全, 明焱. 集合神经网络的洪水预报[J]. 浙江大学学报(工学版), 2016, 50(8): 1471-1478.
[7] 钟崴, 彭梁, 周永刚, 徐剑, 从飞云. 基于小波包分析和支持向量机的锅炉结渣诊断[J]. 浙江大学学报(工学版), 2016, 50(8): 1499-1506.
[8] 夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[9] 李林玉, 吴张华, 余国瑶, 戴巍, 罗二仓. 直线压缩机电声转换特性的实验[J]. 浙江大学学报(工学版), 2016, 50(8): 1529-1536.
[10] 曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 2016, 50(8): 1561-1569.
[11] 胡小东, 顾临怡, 张范蒙. 应用于数字变量马达的高速开关阀[J]. 浙江大学学报(工学版), 2016, 50(8): 1551-1560.
[12] 杨姝, 刘国平, 亓昌, 王大志. 金属空心球梯度泡沫结构抗冲击特性仿真与优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1593-1599.
[13] 辜天来,张帅,郑耀. 咽式进气道/等直隔离段的反压特性[J]. 浙江大学学报(工学版), 2016, 50(7): 1418-1424.
[14] 程时伟, 陆煜华, 蔡红刚. 移动设备眼动跟踪技术[J]. 浙江大学学报(工学版), 2016, 50(6): 1160-1166.
[15] 郑成志, 高金良, 何文杰. 基于FastICA算法的物理漏损流量分析模型[J]. 浙江大学学报(工学版), 2016, 50(6): 1031-1039.