Please wait a minute...
浙江大学学报(工学版)
动力与能源工程     
多目标拓扑优化的低响度正时罩设计
熊飞,郝志勇,郑旭,刘瑞骏
浙江大学 能源工程学院,浙江 杭州 310027
Design of low loudness timing cover based on multiobjective topology optimization
XIONG Fei, HAO Zhi yong, ZHENG Xu, LIU Rui jun
College of Energy Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF(2170 KB)   HTML
摘要:

为了改善正时罩的声品质性能,建立正时罩的有限元模型.提取连接螺栓处在整机多体动力学计算中的振动位移,并作为正时罩频率响应的激励施加于正时罩螺栓孔.对比正时罩测点的振动加速度级的仿真值与测试值,发现两者在趋势及幅值上较吻合,验证了频率响应的准确性.建立正时罩边界元模型,并将频率响应计算结果作为声学边界元的边界条件预测辐射噪声.采用表面振动速度测试值计算辐射噪声声功率,并验证声学预测的准确性.依据Moore响度模型编写响度计算程序,并计算出正时罩辐射噪声响度.确定响度贡献较大的几阶约束模态,通过多目标拓扑优化布置加强筋,以提高刚度使模态频率与激励峰值频率分离,最终降低正时罩辐射噪声响度.仿真结果表明:正时罩辐射噪声响度由49.8 sone降到46.5 sone,降幅达6.7%,人主观可以感受到噪声舒适性得到改善;辐射噪声声功率级总值由84.7 dB降低到83.8 dB,降低0.9 dB.

Abstract:

The finite element model was established, in order to improve sound quality performance of timing cover. The vibration displacement got from multibody dynamics simulation of the connecting bolts were loaded on bolt holes to calculate the frequency response of timing cover. Simulation values and test values of vibration acceleration level of test node on timing cover were compared, which agreed in trend and amplitude, thus the accuracy of the frequency response analysis was verified. The boundary element model of timing cover was established, and the results from the frequency response analysis were regarded as boundary conditions to predict the radiation noise. The radiated noise power was calculated with the method of surface vibration velocity, and the accuracy of  acoustic prediction was verified. The loudness simulation program was written based on the Moore loudness model, and the radiated noise loudness of timing cover was calculated. A few orders of constraint modes which made main contribution to loudness were identified, then stiffeners were placed by multi objective topology optimization method, in order to enhance the stiffness to separate modal frequencies with excitation peak frequencies. The results reveal that radiated noise loudness of timing cover decreases by 6.7% from 49.8 sone to 46.5 sone,  therefore, the comfort of radiation noise is improved obviously. The sound power level of radiated noise decreases by 0.9 dB from 84.7 dB to 83.8 dB.

出版日期: 2017-01-14
:     
基金资助:

国家自然科学基金资助项目(51306143);中央高校基本科研业务费(xjj2013001).

通讯作者: 郝志勇,男,教授. ORCID:0000000299078734.     E-mail: haozy@zju.edu.cn
作者简介: 熊飞(1989-),男,硕士生, 从事发动机振动噪声控制等研究. ORCID:0000000218799979. E-mail:xfnew@sina.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

熊飞,郝志勇,郑旭,刘瑞骏. 多目标拓扑优化的低响度正时罩设计[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008973X.2016.05.022.

XIONG Fei, HAO Zhi yong, ZHENG Xu, LIU Rui jun. Design of low loudness timing cover based on multiobjective topology optimization. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008973X.2016.05.022.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2016.05.022        http://www.zjujournals.com/eng/CN/Y2016/V50/I5/970

[1] 郑康,郝志勇,毛杰,等. 考虑透射噪声的内燃机薄壁件声学预测方法[J]. 浙江大学学报:工学版. 2013, 47(04): 692-697.
ZHENG Kang, HAO Zhiyong, MAO Jie, et al. Acoustic prediction method of engine thinwalled parts considering transmission noise [J]. Journal of Zhejiang University: Engineering Science, 2013, 47(04): 692-697.
[2] 张磊,任海军,艾晓玉,等. 发动机薄壁件结构振动优化[J]. 振动工程学报. 2010, 23(06): 687-697.
ZHANG Lei, REN Haijun, AI Xiaoyu, et al. Vibration optimization on engine covers [J]. Journal of Vibration Engineering, 2010, 23(06): 687-697.
[3] 刘海,张俊红,毕凤荣,等. 柴油机辐射噪声预测与低噪声改进设计[J]. 内燃机学报. 2011, 29(03): 265-269.
LIU Hai, ZHANG Junhong, BI Fengrong, et al. Radiation noise prediction and lownoise modification of diesel engine [J]. Transactions of CSICE, 2011, 29(03): 265-269.
[4] LIU H, ZHANG J H, GUO P, et al. Sound quality prediction for engineradiated noise [J]. Mechanical Systems and Signal Processing. 2015, 56:277-287.
[5] 石岩,舒歌群,毕凤荣. 车辆排气噪声声音品质的主观评价与模型预测[J]. 天津大学学报. 2011, 44(06): 511-515.
SHI Yan, SHU Gequn, BI Fengrong, et al. Sound quality evaluation and prediction of vehicle exhaust noise [J]. Journal of Tianjin University, 2011, 44(06): 511-515.
[6] WANG Y S, SHEN G Q, XING Y F. A sound quality model for objective synthesis evaluation of vehicle interior noise based on artificial neural network [J]. Mechanical Systems and Signal Processing, 2014, 45(1): 255-266.
[7] 王长山,张立军. 汽车关门声声品质评价方法的研究[J]. 汽车工程. 2011, 33(10): 902906, 901.
WANG Changshan, ZHANG Lijun. A study on the method of evaluating the sound quality of vehicle door closing noise [J]. Automotive Engineering, 2011, 44(06): 511-515.
[8] 杨川,于德介. 汽车关门声品质改进方法的研究[J]. 汽车工程. 2012, 34(08): 686-691.
YANG Chuan, YU Dejie. An investigation into the technique for improving the sound quality of vehicle door slamming [J]. Automotive Engineering, 2012, 34(08): 686-691.
[9] ANSI. Procedure for the Computation of Loudness of Steady Sounds [S]. New York: Acoustical Society of America, 2005.
[10] 胡伟杰,金江明,卢奂采. Moore响度模型的数值计算与实验验证[J]. 电声技术. 2013, 37(02): 40-44.
HU Weijie, JIN Jiangming, LU Huancai. Numerical calculation and experimental validation of moore loudness model [J].Elementary Electroacoustics, 2013, 37(02): 40-44.
[11] 马元锋,陈克安,王娜. Moore响度模型的数值计算方法[J]. 声学技术. 2008, 27(03): 390-395.
MA Yuanfeng, CHEN Kean, WANG Na. The study of loudness calculation based on moores model [J]. Technical Acoustics, 2008, 27(03): 390395.
[12] 高琦. 柴油机覆盖件模态分析及其优化[D]. 吉林:吉林大学, 2007:39-47.
GAO Qi. Modal analysis and optimization of the diesel coverage [D].Changchun: Jilin University, 2007:39-47.
[13] 张焕宇,郝志勇,李一民. 490柴油机机体减振降噪研究[J]. 振动与冲击. 2012, 31(07): 54-57.
ZHANG Huanyu, HAO Zhiyong, LI Yimin. Vibration and noise reduction for a 490 diesel engine body [J]. Journal of Vibration and Shock, 2012, 31(07): 54-57.
[14] 李一民,郝志勇,张志明,等. 汽油机正时链传动动力学仿真研究[J]. 内燃机工程. 2013, 34(01): 81-86.
LI Yimin, HAO Zhiyong, ZHANG Zhimin, et al. Simulation research on dynamic characteristic of timing chain trains of gasoline engine [J]. Chinese Internal Combustion Engine Engineering, 2013, 34(01): 81-86.
[15] 贾维新,郝志勇,杨金才. 发动机油底壳辐射噪声预测方法的研究[J]. 内燃机学报. 2005, 23(03): 269-273.
JIA Weixin, HAO Zhiyong, YANG Jincai. Research on prediction method of radiated noise of engine oil pan [J]. Transactions of CSICE, 2005, 23(03): 269-273.
[16] MA Z D, KIKUCHI N, CHENG H C. Topological design for vibrating structures [J]. Computer Methods in Applied Mechanics and Engineering, 1995, 121(1/4): 259-280.

[1] 董凯, 赖俊英, 钱晓倩, 詹树林, 阮方. 夏热冬冷地区居住建筑水平式外遮阳节能效果[J]. 浙江大学学报(工学版), 2016, 50(8): 1431-1437.
[2] 李佳琦, 范利武, 俞自涛. 超亲水表面在淬火冷却过程中的沸腾传热特性[J]. 浙江大学学报(工学版), 2016, 50(8): 1493-1498.
[3] 江衍铭, 张建全, 明焱. 集合神经网络的洪水预报[J]. 浙江大学学报(工学版), 2016, 50(8): 1471-1478.
[4] 钟崴, 彭梁, 周永刚, 徐剑, 从飞云. 基于小波包分析和支持向量机的锅炉结渣诊断[J]. 浙江大学学报(工学版), 2016, 50(8): 1499-1506.
[5] 夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[6] 李林玉, 吴张华, 余国瑶, 戴巍, 罗二仓. 直线压缩机电声转换特性的实验[J]. 浙江大学学报(工学版), 2016, 50(8): 1529-1536.
[7] 曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 2016, 50(8): 1561-1569.
[8] 胡小东, 顾临怡, 张范蒙. 应用于数字变量马达的高速开关阀[J]. 浙江大学学报(工学版), 2016, 50(8): 1551-1560.
[9] 杨姝, 刘国平, 亓昌, 王大志. 金属空心球梯度泡沫结构抗冲击特性仿真与优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1593-1599.
[10] 杨章, 童根树, 张磊. 对称布置2根单侧加劲肋的有效刚度[J]. 浙江大学学报(工学版), 2016, 50(8): 1446-1455.
[11] 蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁抗火性能试验[J]. 浙江大学学报(工学版), 2016, 50(8): 1463-1470.
[12] 单华峰, 夏唐代, 俞峰, 胡军华, 潘金龙. 地下增层开挖托换桩的屈曲稳定临界荷载分析[J]. 浙江大学学报(工学版), 2016, 50(8): 1425-1430.
[13] 辜天来,张帅,郑耀. 咽式进气道/等直隔离段的反压特性[J]. 浙江大学学报(工学版), 2016, 50(7): 1418-1424.
[14] 程时伟, 陆煜华, 蔡红刚. 移动设备眼动跟踪技术[J]. 浙江大学学报(工学版), 2016, 50(6): 1160-1166.
[15] 郑成志, 高金良, 何文杰. 基于FastICA算法的物理漏损流量分析模型[J]. 浙江大学学报(工学版), 2016, 50(6): 1031-1039.