Please wait a minute...
Chinese Journal of Engineering Design  2008, Vol. 15 Issue (3): 191-197    DOI:
    
Mechanism and experiment research on rotational magnetic field generated by circumferentially arrayed permanent magnets
 ZHANG   Wei1, HUANG   Ping2, MENG  Yong-Gang1
1. State Key Laboratory of Tribology, Department of Precision Instruments and Mechanology,
 Tsinghua University, Beijing 100084, China; 2. School of Mechanical Engineering, 
South China University of Technology, Guangzhou 510640, China
Download: HTML     PDF(500KB)
Export: BibTeX | EndNote (RIS)      

Abstract   Actively driving an inner micro-robot by an outer magnetic field for diagnosis is a feasible and crucial driven method. However, How to generate suitable outer magnetic is a complex problem. Comparing with the common methods adopting assembled electromagnetic loops to generate a driving field, an innovative and simple method was presented, by which permanent magnets were assembled to generate a rotational magnetic field. The circumferentially arrayed permanent magnet was adjusted to the corresponding original azimuth, and then synchronization rotation generated rotating magnetic field in the center of the array to work as the driving field of micro-robot. Furthermore, theoretic analysis and numeric calculation of the magnetic induction intensity distribution of the array center was carried out and a test-bed was established. The experimental results indicate that when circumferentially array six cubic magnets with 50 mm×50 mm×18 mm at the diameter of 275 mm, an even magnetic field of 0.012T can be generated in the central space,±50 mm×±50 mm×±20 mm, of the array. This magnetic field rotates with the same velocity as the outer magnet does, but in the reverse direction. The method, with wide application foreground, can be applied to generate a magnetic field to drive a micro robot, for diagnosis and treatment.

Key wordspermanent magnet      array      rotational magnetic field      drive     
Published: 28 June 2008
Cite this article:

ZHANG Wei, HUANG Ping, MENG Yong-Gang. Mechanism and experiment research on rotational magnetic field generated by circumferentially arrayed permanent magnets. Chinese Journal of Engineering Design, 2008, 15(3): 191-197.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2008/V15/I3/191


阵列永磁体产生旋转磁场的机理及实验

诊疗微机器人外磁主动驱动是一种重要的可行的驱动方式,而如何产生合适的外部磁场是一个比较复杂的问题.相对于目前常用的通过电磁线圈组合产生驱动磁场方式,提出一种新的简单可行的永磁体组合产生旋转磁场方法,即圆周阵列永磁体并将其调整到对应的初始方位角后,同步转动在阵列中心区域产生旋转磁场,作为微机器人的主动驱动场.对于阵列中心区域的磁感应强度分布,作了理论分析和数值计算,并搭建了实验台.实验表明,采用边长为50 mm、高为18 mm的钕铁硼永磁体阵列,阵列数为6,阵列直径为275 mm时,可以在±50 mm×±50 mm×±20 mm阵列中心区域产生一个大小为0.012 T的均匀磁场,该磁场与永磁体同步旋转但是方向相反.这种新的磁场产生方法可以用于微机器人特别是诊疗微机器人的驱动,具有广阔的应用前景.

关键词: 永磁体,  阵列,  旋转磁场,  驱动 
[1] Zhan YANG,Qipeng LI,Wei TANG,Kecheng QIN,Suifan CHEN,Kaidi WANG,Yang LIU,Jun ZOU. Design and analysis of small land-air deformable amphibious robot[J]. Chinese Journal of Engineering Design, 2023, 30(3): 325-333.
[2] Yang DING,Minglu ZHANG,Xin JIAO,Manhong LI. Biomimetic structure design and compliant motion control for hexapod robot driven by joint motors[J]. Chinese Journal of Engineering Design, 2023, 30(2): 154-163.
[3] Qin LI,Rui YAN,Zhiqiang HUANG,Gang LI. Research on matching design and optimization of drive motor of electric drive vibroseis[J]. Chinese Journal of Engineering Design, 2023, 30(2): 172-181.
[4] Feng-yu FAN,Zhao-zhong ZHOU,Ying ZHAO,Jun WANG. Research on passive control of surface-mounted permanent magnet synchronous motor based on current decoupling[J]. Chinese Journal of Engineering Design, 2022, 29(6): 731-738.
[5] Pei-cheng SHI,Xu CHEN,Ai-xi YANG,Liang ZHANG. Ackerman steering trajectory planning and position estimation of 4WID-4WIS intelligent vehicle[J]. Chinese Journal of Engineering Design, 2022, 29(2): 123-132.
[6] Sheng XU,Qiang XING,Hao WANG. Automatic following system of mobile robot based on annular infrared array[J]. Chinese Journal of Engineering Design, 2022, 29(2): 247-253.
[7] Xue-jun WANG,Jiang-hua PU,Ming-fang CHEN. Dynamic characteristic analysis of synchronous belt transmission elevator for automatic production line[J]. Chinese Journal of Engineering Design, 2022, 29(2): 212-219.
[8] ZHONG Dao-fang, TIAN Ying, ZHANG Ming-lu. Design and optimization of permanent magnet adsorption device for wheel-legged wall-climbing robot[J]. Chinese Journal of Engineering Design, 2022, 29(1): 41-50.
[9] WU Guo-pei, YU Yin-quan, TU Wen-bing. Review of research on fault diagnosis of permanent magnet synchronous motor[J]. Chinese Journal of Engineering Design, 2021, 28(5): 548-558.
[10] ZHENG Yu-chen, JU Feng, WANG Dan, SUN Jing-bin, WANG Ya-ming, CHEN Bai. Design and control research of aeroengine blade detection robot[J]. Chinese Journal of Engineering Design, 2021, 28(5): 625-632.
[11] WANG Cheng-jun, LI Shuai. Design and bending performance analysis of three-joint soft actuator[J]. Chinese Journal of Engineering Design, 2021, 28(2): 227-234.
[12] WEI Qiong, ZHANG Yong-liang, YOU Ying, WANG Quan. Design of flexible finger based on multi-cavity soft driver[J]. Chinese Journal of Engineering Design, 2020, 27(4): 425-438.
[13] WANG Xiao-yang, ZENG Ting, YU Long-qi, TAN Xu, YU Rong-rong, DONG Li-gang. Research on high precision mass property measuring method for solar array[J]. Chinese Journal of Engineering Design, 2020, 27(1): 44-50.
[14] LAI Sen-cai, REN Wen. Kalman speed measurement algorithm for tachogenerator under structural asymmetry conditions[J]. Chinese Journal of Engineering Design, 2018, 25(6): 639-646.
[15] YIN He-sheng, ZHANG Qiu-ju, NING Meng. Design of synchronous steering mechanism of driving wheel for omnidirectional mobile robot[J]. Chinese Journal of Engineering Design, 2018, 25(2): 230-236.