电气工程 |
|
|
|
|
大型软包锂离子电池的热物性实验研究 |
王帅林1( ),盛雷1,2,齐丽娜3,方奕栋1,李康1,苏林1,*( ) |
1. 上海理工大学 能源与动力工程学院,上海 200093 2. 上海理工大学 机械工程学院,上海 200093 3. 兰考县第三高级中学物理组,河南 开封 475300 |
|
Experimental investigation on thermophysical parameters of large-format pouch lithium-ion battery |
Shuai-lin WANG1( ),Lei SHENG1,2,Li-na QI3,Yi-dong FANG1,Kang LI1,Lin SU1,*( ) |
1. School of Energy and Power Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China 2. School of Mechanical Engineering, University of Shanghai for Science and Technology, Shanghai 200093, China 3. Physics Teachers’ Office, The Third Senior High School of Lankao, Kaifeng 475300, China |
引用本文:
王帅林,盛雷,齐丽娜,方奕栋,李康,苏林. 大型软包锂离子电池的热物性实验研究[J]. 浙江大学学报(工学版), 2021, 55(10): 1986-1992.
Shuai-lin WANG,Lei SHENG,Li-na QI,Yi-dong FANG,Kang LI,Lin SU. Experimental investigation on thermophysical parameters of large-format pouch lithium-ion battery. Journal of ZheJiang University (Engineering Science), 2021, 55(10): 1986-1992.
链接本文:
https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2021.10.021
或
https://www.zjujournals.com/eng/CN/Y2021/V55/I10/1986
|
1 |
LU D, LIN S, HU S, et al Thermal behavior and failure mechanism of large format lithium-ion battery[J]. Journal of Solid State Electrochemistry, 2020, 25 (1): 315- 325
doi: 10.1007/s10008-020-04810-z
|
2 |
GOMEZ J, NELSON R, KALU E E, et al Corrigendum to “equivalent circuit model parameters of a high-power Li-ion battery: thermal and state of charge effects”[J]. Power Sources, 2011, 196 (10): 4826- 4831
doi: 10.1016/j.jpowsour.2010.12.107
|
3 |
WANG H C, SHENG L, GHULAM Y, et al Reviewing the current status and development of polymer electrolytes for solid-state lithium batteries[J]. Energy Storage Materials, 2020, 33: 188- 215
doi: 10.1016/j.ensm.2020.08.014
|
4 |
程夕明, 唐宇, 王寿群 锂离子电池热物性参数测量方法综述[J]. 机械工程学报, 2019, 55 (14): 140- 150 CHENG Xi-ming, TANG Yu, WANG Shou-qun Overview of measurement methods for thermal properties of lithium-ion batteries[J]. Chinese Journal of Mechanical Engineering, 2019, 55 (14): 140- 150
doi: 10.3901/JME.2019.14.140
|
5 |
LOGES A, HERBERGER S, WERNER D, et al Thermal characterization of Li-ion cell electrodes by photothermal deflection spectroscopy[J]. Journal of Power Sources, 2016, 325 (9): 104- 115
|
6 |
YANG X L, HU X B, CHEN Z, et al Effect of ambient dissipation condition on thermal behavior of a lithium-ion battery using a 3D multi-partition model[J]. Applied Thermal Engineering, 2020, 178 (1): 10- 21
|
7 |
辛乃龙. 纯电动汽车锂离子动力电池组热特性分析及仿真研究[D]. 吉林: 吉林大学, 2012. XIN Nai-long. Thermal characteristics analysis and simulation study of lithium-ion power battery pack for pure electric vehicles [D]. Jilin: Jilin University, 2012.
|
8 |
崔喜风, 张红亮, 龚阳, 等 方形硬壳锂离子动力电池的热物性参数[J]. 中国有色金属学报, 2019, 29 (12): 2747- 2756 CUI Xi-feng, ZHANG Hong-liang, GONG Yang, et al Thermal properties of square hard-shell lithium-ion power batteries[J]. The Chinese Journal of Nonferrous Metals, 2019, 29 (12): 2747- 2756
|
9 |
VERTIZ G, OYARBIDE M, MACICIOR H, et al Thermal characterization of large size lithium-ion pouch cell based on 1d electro-thermal model[J]. Journal of Power Sources, 2014, 272 (12): 476- 484
|
10 |
BAZINSKI S J, WANG X Experimental study on the influence of temperature and state-of-charge on the thermophysical properties of an LFP pouch cell[J]. Journal of Power Sources, 2015, 293: 283- 291
doi: 10.1016/j.jpowsour.2015.05.084
|
11 |
DRAKE S J, WETZ D A, OSTANEK J K, et al Measurement of anisotropic thermophysical properties of cylindrical Li-ion cells[J]. Journal of Power Sources, 2014, 252: 298- 304
doi: 10.1016/j.jpowsour.2013.11.107
|
12 |
NEIL S, KATHERINE M, RYAN M, et al Novel 18650 lithium-ion battery surrogate cell design with anisotropic thermophysical properties for studying failure events[J]. Journal of Power Sources, 2016, 312: 1- 11
doi: 10.1016/j.jpowsour.2016.01.107
|
13 |
盛雷, 徐海峰, 苏林, 等 车用磷酸亚铁锂电池的热特性与热物性研究[J]. 汽车工程, 2019, 41 (10): 1152- 1157 SHENG Lei, XU Hai-feng, SU Lin, et al Research on thermal characteristics and thermophysical properties of lithium iron phosphate batteries for vehicles[J]. Automotive Engineering, 2019, 41 (10): 1152- 1157
|
14 |
FORGEZ C, DO D V, FRIEDRICH G, et al Thermal modeling of a cylindrical LiFePO4 /graphite lithium-ion battery [J]. Journal of Power Sources, 2010, 195 (9): 2961- 2968
doi: 10.1016/j.jpowsour.2009.10.105
|
15 |
SHENG L, SU L, ZHANG H Y, et al An improved calorimetric method for characterizations of the specific heat and the heat generation rate in a prismatic lithium ion battery cell[J]. Energy Conversion and Management, 2019, 180 (2): 724- 732
|
16 |
SHENG L, SU L, ZHANG H Y, et al Experimental determination on thermal parameters of prismatic lithium-ion battery cells[J]. International Journal of Heat and Mass Transfer, 2019, 139 (16): 231- 239
|
17 |
吴青余, 张恒运, 李俊伟 校准量热法测量锂电池比定压热容和生热率[J]. 汽车工程, 2020, 42 (1): 59- 65 WU Qing-yu, ZHANG Heng-yun, LI Jun-wei Calibration calorimetry to measure the specific heat capacity and heat generation rate of lithium batteries[J]. Automotive Engineering, 2020, 42 (1): 59- 65
|
18 |
ZHANG J B, WU B, LI Z, et al Simultaneous estimation of thermal parameters for large-format laminated lithium-ion batteries[J]. Journal of Power Sources, 2014, 259 (12): 106- 116
|
19 |
ZHANG X, REINHARDT K, ANANTHARAMAN S Evaluation of convective heat transfer coefficient and specific heat capacity of a lithium-ion battery using infrared camera and lumped capacitance method[J]. Journal of Power Sources, 2019, 412 (2): 552- 558
|
20 |
卢建航, 孙宏, 尹海山 用准稳态法测定橡胶及橡胶基复合材料的导热系数和比定压热容[J]. 轮胎工业, 2001, 5 (5): 305- 309 LU Jian-hang, SUN Hong, YIN Hai-shan Determination of thermal conductivity and specific heat capacity of rubber and rubber-based composites by quasi-steady-state method[J]. Tire Industry, 2001, 5 (5): 305- 309
doi: 10.3969/j.issn.1006-8171.2001.05.012
|
21 |
黄锐. 塑料工程手册(上)[M]. 北京: 机械工程出版社, 2000: 223.
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|