机械工程 |
|
|
|
|
螺旋面磨料流光整加工仿真与试验 |
高航, 付有志, 王宣平, 彭灿 |
大连理工大学 精密与特种加工教育部重点实验室,辽宁 大连 116024 |
|
Simulations and experiments on finishing process of screw surface by using abrasive flow machining |
GAO Hang,FU You zhi,WANG Xuan ping,PENG Can |
Key Laboratory for Precision and Nontraditional Machining Technology of Ministry of Education,Dalian University of Technology, Dalian 116024, China |
[1] VERCRUYSSE J, BURGGRAEVE A, FONTEYNE M, et al. Impact of screw configuration on the particle size distribution of granules produced by twin screw granulation [J]. International journal of pharmaceutics, 2015, 479(1): 171-180.
[2] HUANG R, LI T, YU X, et al. An optimization of the starwheel profile in a single screw compressor [J]. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 2014, 229(2):139-150.
[3] LAWAL A, KALYON D M. Nonisothermal extrusion flow of viscoplastic fluids with wall slip [J]. International Journal of Heat and Mass Transfer, 1997, 40(16): 3883-3897.
[4] 裴丽霞. 聚合物塑化混炼挤出机螺杆的设计改进[J]. 橡塑技术与装备, 2014, 40(4): 34-37.
PEI Lixia. Improvements of polymer plasticized compounding extruder screw design [J]. China Rubber/Plastics Technology and Equipment :Plastic edition, 2014, 40(4): 34-37.
[5] MUIZNIEKS G, GERINS E, OZOLINS J. Analysis of condition changes of rotor compressors contact surface[C]∥ Proceedings of the 7th International Conference of DAAAM Baltic Industrial Engineering. Tallinn: DAAAM International, 2010:441-445.
[6] KATSUMI K, KAZUMASA K, HISASHI T. Gearcutting tool for screwcompressor rotors (builtup hob) [J]. JSME International Journal Series C Mechanical Systems Machine Elements and Manufacturing, 2001, 44(3): 802-807.
[7] 吴宝海, 张娟, 杨建华, 等. 螺杆压缩机转子成形砂轮刃形计算[J]. 机械工程学报, 2012, 48(19): 192-198.
WU Baohai ZHANGJuan YANG Jianhua, et al. Calculation method for edge shape of forming wheel for screw rotors machining [J]. Journal of Mechanical Engineering, 2012, 48(19): 192-198.
[8] STOSIC N. A geometric approach to calculating tool wear in screw rotor machining [J]. International Journal of Machine Tools and Manufacture, 2006, 46(15): 1961-1965.
[9] WEI J, ZHANG G. A precision grinding method for screw rotors using CBN grinding wheel[J]. The International Journal of Advanced Manufacturing Technology, 2010, 48(5/8): 495-503.
[10] 陈庆延. 螺旋曲面砂带抛光工艺方法及专用数控抛光机研究[D]. 沈阳: 沈阳工业大学, 2009.
CHEN Qingyan. The study of spiral surface belt polishing process method and special CNC polishing machine[D]. Shenyang: Shenyang University of Technology, 2009.
[11] JAIN V K, ADSUL S G. Experimental investigations into abrasive flow machining (AFM)[J]. International Journal of Machine Tools and Manufacture, 2000, 40(7): 1003-1021.
[12] KAR K K, RAVIKUMAR N L, TAILOR P B, et al. Performance evaluation and rheological characterization of newly developed butyl rubber based media for abrasive flow machining process[J]. Journal of materials processing technology, 2009, 209(4): 2212-2221.
[13] 汤勇, 周德明, 夏伟, 等. 磨料流加工壁画滑动特性的研究[J]. 华南理工大学学报: 自然科学版, 2001, 29(1): 34-37.
TANG Yong, ZHOU Deming, XIA Wei, et al. Some investigation on the characteristic of wall sliding in abrasive flow machinning [J]. Journal of South China University of Technology :Natural Science Edition, 2001, 29(1): 34-37.
[14] 计时鸣, 翁晓星, 谭大鹏. 基于水平集方法的软性磨粒两相流场特性分析[J]. 浙江大学学报: 工学版, 2012, 45(12): 2222-2228.
JI Shiming, WENG Xiaoxing, Tan Dapeng, et al. Analysis on characteristics of softness abrasive twophase flow field based on level set method [J]. Journal of Zhejiang University :Engineering Science, 2012, 45(12): 2222-2228.
[15] 李琛, 计时鸣, 谭大鹏, 等. 软性磨粒流加工特性及近壁区域微切削机理[J]. 机械工程学报, 2014, 50(9): 161-168.
LI Chen, JI Shiming, TAN Dapeng, et al. Study of near wall area microcutting mechanism and finishing characteristics for softness abrasive flow finishing[J]. Journal of Mechanical Engineering, 2014, 50(9): 161-168.
[16] WANG A C, CHEN K Y, CHENG K C, et al. Elucidating the Effects of Helical Passageways in Abrasive Flow Machining[J]. Advanced Materials Research, 2011, 264: 1862-1867.
[17] BOLOT R, PLANCHE M P, LIAO H, et al. A threedimensional model of the wirearc spray process and its experimental validation[J]. Journal of materials processing technology, 2008, 200(1): 94-105.
[18] ROCHA COSTA P A, ROCHA BARBOSA H H, CARNEIRO MOURA F O, et al. k–ω SST (shear stress transport) turbulence model calibration: A case study on a small scale horizontal axis wind turbine[J]. Energy, 2014, 65: 412-418.
[19] 计时鸣, 李琛, 谭大鹏, 等. 软性磨粒流加工方法及近壁区域特性[J]. 浙江大学学报 :工学版, 2012, 46(10): 1764-1772.
JI Shiming, LI Chen, TAN Dapeng, et al. Softness abrasive flow machining and characteristics of near wall area[J]. Journal of Zhejiang University :Engineering Science, 2012, 46(10): 1764-1772. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|