机械与电气工程 |
|
|
|
|
基于液压平衡的试油试采系统建模与仿真 |
赵鹏宇1, 陈英龙1, 孙军2, 周华1 |
1.浙江大学流体动力与机电系统国家重点实验室,浙江 杭州310027;2.辽河油田分公司钻采工艺研究院,辽宁 盘锦 124000 |
|
Modeling and simulation of well test and production test system based on hydraulic balance |
ZHAO Peng yu1, CHEN Ying long1, SUN Jun2, ZHOU Hua1 |
1. State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China;2. Liaohe Oilfield Company Drilling and Production Process Research Institute, Panjin 124000, China |
[1] 魏新.移动式试油试采举升装置电液控制系统的设计研究[D].杭州:浙江大学,2008.
WEI Xin. Design of electrohydraulic control system of traveling test oil and test tree lift equipment [D]. Hangzhou: Zhejiang University, 2008.
[2] 张彦廷,孙绪振,张恩强,等.液压抽油机关键参数分析及节能研究[J].机床与液压,2009, 37(10): 80-82.
ZHANG Yan ting, SUN Xu zhen, ZHANG En qiang, et al. Analysis on key parameters and the research oil energy saving for hydraulic pumping unit [J]. Machine Tool and Hydraulic, 2009, 37(10): 80-82.
[3] 方仁杰,朱维兵.抽油机历史现状与发展趋势分析[J].钻采工艺,2011, 34(2): 60-63.
FANG Ren jie, ZHU Wei bing. Analysis on history and development trend of pumping unit [J]. Drilling and Production Technology, 2011, 34(2): 60-63.
[4] 黄永平,郭凯,金玉善.调压式抽油机节能控制器的研究[J].电子学报,2013, 41(4): 828-832.
HUANG Yong ping, GUO Kai, JIN Yu shan. Research on voltage regulating energy saving controller of pumping unit [J]. Acta Electronica Sinica, 2013,41(4): 828-832.
[5] 范文明,宋锦春.新型节能液压抽油机驱动系统设计[J].机械设计与制造, 2014(7): 6871.
FAN Wen ming, SONG Jin chun. Design of a new energy saving driving system for oil pumping unit [J].Machinery Design and Manufacture, 2014(7): 68-71.
[6] 周广清.低矮型长冲程节能抽油机的研制及应用[J].石油机械,2014, 42(3): 88-91.
ZHOU Guang qing. Development and application of low size long stroke pumping unit [J]. China Petroleum Machinery, 2014, 42(3): 88-91.
[7] MORIDIS G J, SILPNGARMLERT S, REAGAN M T, et al. Gas production from a cold, stratigraphically bounded gas hydrate deposit at the Mount Elbert gas hydrate stratigraphic test well, Alaska North Slope: implications of uncertainties [J]. Marine and Petroleum Geology, 2011, 28(2): 517-534.
[8] LCKMANN A J, ALVES M V C, JR J R B. Analysis of oil pumping in a reciprocating compressor [J].Applied Thermal Engineering, 2009, 29(14): 3118-3123.
[9] LU Q F, FAN C Z, YE Y Y, et al. A high torque density permanent magnet motor for oil pumping unit [J]. Journal of Applied Physics, 2008, 103(7): 1-3.
[10] LEA J F. What’s new in artificial lift [J]. World Oil, 2003, 204(5): 31-36.
[11] 聂松林,李壮云,余祖耀.轴向柱塞式液压马达转矩特性的理论研究[J].液压与气动,2002(7): 7-10.
NIE Song lin, LI Zhuang yun, YU Zu yao. Study on torque characteristic of axial piston hydraulic motor [J]. Chinese Hydraulics and Pneumatics, 2002(7): 7-10.
[12] 张慧英,汪旭东,高彩霞.开关磁阻电机转矩脉动最小化研究[J].微电机,2009, 42(9): 15-17.
ZHANG Hui ying, WANG Xu dong, GAO Cai xia. Study of minimization of torque ripple in SRM drives [J]. Micromotors, 2009, 42(9): 15-17. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|