机械与能源工程 |
|
|
|
|
采用软溢流模糊PID控制器的液压垫压边力控制 |
张强, 魏建华, 时文卓 |
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027 |
|
Blank holder force control of hydraulic cushion with soft relief fuzzy PID controller |
ZHANG Qiang, WEI Jian-hua, SHI Wen-zhuo |
State Key Laboratory of Fluid Power and Mechatronic Systems, Zhejiang University, Hangzhou 310027, China |
引用本文:
张强, 魏建华, 时文卓. 采用软溢流模糊PID控制器的液压垫压边力控制[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2017.06.012.
ZHANG Qiang, WEI Jian-hua, SHI Wen-zhuo. Blank holder force control of hydraulic cushion with soft relief fuzzy PID controller. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2017.06.012.
|
参考文献(References):
[1] 秦泗吉.压边力控制技术研究现状及伺服数控压边方法可行性探讨[J].中国机械工程,2007,18(1): 120-125.
QIN Siji. State-of-the-art of blank holding force control technology and feasibility of numerical servo-control holding [J]. China Mechanical Engineering, 2007,18(1): 120-125.
[2] 张晓斌,孙宇,樊红梅,等.板料成形压边力控制技术研究现状及发展趋势[J].锻压技术,2007,32(6): 6-12.
ZHANG Xiao-bin, SUN Yu, FAN Hong-mei, et al. Recent research and development trend of blank holder force control technology for sheet metal forming [J]. Forging and Stamping Technology, 2007, 32(6): 6-12.
[3] YOSSIFON S, SWEENEY K, AHMETOGLU M, et al. On the acceptable blank-holder force range in the deep-drawing process [J]. Journal of Materials Processing Technology, 1992, 33(1/2): 175-194.
[4] CHOI H, KOC M, NI J. Determination of optimal loading profiles in warm hydroforming of lightweight materials [J]. Journal of Materials Processing Technology, 2007, 190(13): 230-242.
[5] KITAYAMA S, NATSUME S, YAMAZAKI K, et al. Numerical optimization of blank shape considering flatness and variable blank holder force for cylindrical cup deep drawing [J]. International Journal of Advanced Manufacturing Technology, 2016, 85(9-12): 2389-2400.
[6] ÖZTÜRK E, TÜRKÖZ M, HALKACI H, et al. Determination of optimal loading profiles in hydromechanical deep drawing process using integrated adaptive finite element analysis and fuzzy control approach [J]. International Journal of Advanced Manufacturing Technology, 2017, 88(912): 2443-2459.
[7] 王健伟.多工位压力机数控液压垫液压系统的研究[D].杭州:浙江大学,2008.
WANG Jian-wei. The research of hydraulic system on NC control multi-point die-cushion [D]. Hangzhou: Zhejiang University, 2008.
[8] WAGENER H. New developments in sheet metal forming: Sheet materials, tools and machinery [J]. Journal of Materials Processing Technology, 1997, 72(3):342-357.
[9] YAGAMI T, MANABE K, YANG M, et al. Intelligent sheet stamping process using segment blankholder modules [J]. Journal of Materials Processing Technology, 2004, 155/156(13): 2099-2105.
[10] SIEGERT K, DANNENMANN E, WAGNER S, et al. Closed-loop control system for blank holder forces in deep drawing [J]. CIRP AnnalsManufacturing Technology, 1995, 44(1): 251-254.
[11] SIEGERT K, ZIEGLER M, WAGNER S. Closed loop control of the friction force deep drawing process [J]. Journal of Materials Processing Technology, 1997,71(1): 126-133.
[12] SU C, ZHAO J. VBHF system research basing on the technology of fuzzy PID control [J]. Open Mechanical Engineering Journal, 2015, 9(1): 514-520.
[13] 彭雄斌,龚国芳,陈馈,等.管片拼装机提升缸模糊PID同步控制[J].浙江大学学报:工学版,2014,48(11): 2002-2008.
PENG Xiong-bin, GONG Guo-fang, CHEN Kui, et al. Synchronization fuzzy PID control oflifting hydraulic cylinders for segment erector [J]. Journal of Zhejiang University: Engineering Science, 2014, 48(11): 2002-2008.
[14] MENG D, ZHAO S, LI L, et al. A servo-motor driven active blank holder control system for deep drawing process [J]. International Journal of Advanced Manufacturing Technology, 2016, 87(912): 3185-3193.
[15] ENDELT B, TOMMERUP S, DANCKERT J. A novel feedback control system-controlling the material flow in deep drawing using distributed blankholder force [J]. Journal of Materials Processing Technology, 2013, 213(1): 36-50.
[16] KOMSTA J, VAN OIJEN N, ANTOSZKIEWICZ P. Integral sliding mode compensator for load pressure control of die-cushion cylinder drive [J]. Control Engineering Practice, 2013, 21(5): 708-718.
[17] 李壮云.液压元件与系统:第3版[M].北京:机械工业出版社,2011: 176-180.
[18] 李国勇,杨丽娟. 神经·模糊·预测控制及其MATLAB实现:第3版[M].北京:电子工业出版社,2013: 205-215. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|