Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2009, Vol. 16 Issue (5): 391-394    DOI:
    
Topology optimization design of bicycle frame based on ANSYS
 ZHAO  De-Bin, FAN   Jun, LI  Guo-Zhu
School of Mechanical Engineering, Xinjiang University, Urumqi 830000, China
Download: HTML     PDF(428KB)
Export: BibTeX | EndNote (RIS)      

Abstract  In order to seek the optimal structure shape of bicycle frame, its topology optimization design was carried out. The present research situation and mathematical model of topology optimization were introduced firstly. Then topology optimization design to bicycle frame by finite element analysis software ANSYS 11.0 was carried out. Finally the optimal structure shape of bicycle frame, that is two triangles, is obtained and then improving method of the present bicycle frame is proposed．

Key words： bicycle      frame      topology optimization      ANSYS     
Published: 28 October 2009
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
ZHAO De-Bin
FAN Jun
LI Guo-Zhu
Cite this article:

ZHAO De-Bin, FAN Jun, LI Guo-Zhu. Topology optimization design of bicycle frame based on ANSYS. Chinese Journal of Engineering Design, 2009, 16(5): 391-394.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2009/V16/I5/391


基于ANSYS的自行车车架拓扑优化设计

为了寻求自行车车架的最佳结构形状,对其进行拓扑优化设计.首先介绍拓扑优化的研究现状和数学模型，接着应用有限元分析软件ANSYS 110对自行车车架进行拓扑优化设计，得出自行车车架的最佳结构形状为2个三角形,并对目前的自行车车架提出了改进措施.

关键词： 自行车,  车架,  拓扑优化,  ANSYS 
[1] Hongyue CHEN,Minghang CAI,Xinwei YANG,Zhonghuan DAI. Structure and dynamics analysis of special manipulator frame for replacing wire rope of electric shovel[J]. Chinese Journal of Engineering Design, 2023, 30(5): 590-600.
[2] Xiaoqiang ZHANG,Biwei LU,Jiaqin LIU,Yucheng WU. Topology optimization design and steady-state thermal analysis of fusion reactor divertor[J]. Chinese Journal of Engineering Design, 2023, 30(5): 601-607.
[3] Xiaofei ZHENG,Zhenhai HUANG,Xiaolong MA,Jianxin WANG,Binrui WANG. Structure optimization and analysis of pole-climbing robot based on SIMP method[J]. Chinese Journal of Engineering Design, 2023, 30(3): 342-352.
[4] Xu-hui ZHANG, Jian-xing YAN, Bing MA, Jia-shan JU, Qi-feng SHEN, Yu-jia WU. Research on abnormal detection method of side guard based on improved YOLOv5s[J]. Chinese Journal of Engineering Design, 2022, 29(6): 665-675.
[5] Qiang CHEN,Shi-qiang HU,Ling-kun LUO,Bing LIU,Yuan FANG. UAV autonomous stringing system based on ground station assistance[J]. Chinese Journal of Engineering Design, 2022, 29(5): 634-642.
[6] Jing-liang WANG,Tian-cheng ZHU,Long-biao ZHU,Fei-yun XU. Research on variable density topology optimization method for continuum structure[J]. Chinese Journal of Engineering Design, 2022, 29(3): 279-285.
[7] NI Wei-yu, ZHANG Heng, YAO Sheng-wei. Lightweight design of automobile seat frame based on multiple working conditions[J]. Chinese Journal of Engineering Design, 2021, 28(6): 729-736.
[8] QI Yu-ming, XIE Bing, WANG Gang, SU Wei-hua, LIU Zhao-hua. Research on structure design and control system of compact bicycle stereo garage[J]. Chinese Journal of Engineering Design, 2020, 27(4): 524-532.
[9] ZHANG Hu-zhi, MA Zhe-lin, HUANG Hai-lin, JIN Hao, PENG Wei. Topology optimization for reinforced concrete deep beam with different displacement boundaries[J]. Chinese Journal of Engineering Design, 2019, 26(6): 691-699.
[10] TANG Lin, XU Zhi-pei, HE Tian-long, AO Wei-chuan. Sensitivity analysis of rotation frame stability based on BP neural network[J]. Chinese Journal of Engineering Design, 2018, 25(5): 576-582.
[11] ZHANG Ri-cheng, ZHAO Jiong, WU Qing-long, XIONG Xiao-lei, ZHOU Qi-cai, JIAO Hong-yu. Variable density topology optimization method considering structural stability[J]. Chinese Journal of Engineering Design, 2018, 25(4): 441-449.
[12] DU Yi-xian, LI Rong, XU Ming, TIAN Qi-hua, ZHOU Xiang-man. Topology optimization design for negative Poisson's ratio microstructure[J]. Chinese Journal of Engineering Design, 2018, 25(4): 450-456.
[13] TANG Hua-ping, ZENG Li, WANG Sheng-ze, CHEN Hao-sen. Design of roll-over protective structure for heavy mining dumper based on topology optimization[J]. Chinese Journal of Engineering Design, 2018, 25(3): 295-301.
[14] HU Jun-ping, QIAO Yu-kai, LI Ke-jun, HU Hui-yu. Stability analysis of the mast of continuous flight auger driller with double braces under direct-drill-lifting condition[J]. Chinese Journal of Engineering Design, 2018, 25(2): 151-158.
[15] LIU Wen, ZHANG Jin-hong, LIN Teng-jiao, YANG Yun, CAI Yun-long. Prediction and research on influencing factors of structural noise of bridge crane with three-point support[J]. Chinese Journal of Engineering Design, 2017, 24(5): 580-587,594.