|
|
|
| Stability analysis of the mast of continuous flight auger driller with double braces under direct-drill-lifting condition |
| HU Jun-ping1, QIAO Yu-kai1, LI Ke-jun1, HU Hui-yu2 |
1. College of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China;
2. Hunan Changhe Machinery Co., Ltd., Changsha 410600, China |
|
|
|
Abstract To analyze the stability of the mast of continuous flight auger driller with double braces under direct-drill-lifting condition, the deflection differential equations of the mast were established. With proper boundary conditions, the instability characteristic equations of the mast and the critical value of lifting drill were presented. The stability of ZLH43ZL(TB)-D180 continuous flight auger driller was analyzed, and the theoretical analysis results and the calculating results by ANSYS finite element method were compared. The results implied that the established instability characteristic equations were right and revealed that the instability critical value Fcr was related to the factors such as the main and auxiliary supporting position parameters λ1 and λ2, the mast section inertia moment I and the main hoisting wire rope angle θ. Meanwhile, Fcr first increased and then decreased with the increase of λ1 and λ2, and the impact of the λ1 was much bigger than the impact of λ2. With the increase of I, Fcr first increased rapidly, and then gradually eased. With the increase of θ (0° ≤ θ ≤ 20°), Fcr increased slowly. The conclusion can be expanded to analyzing the stability of the similar machinery structures in the context of engineering machinery.
|
|
Received: 20 November 2017
Published: 28 April 2018
|
|
|
直接提钻工况下双斜撑长螺旋钻机桅杆稳定性分析
为准确分析直接提钻工况下双斜撑长螺旋钻机桅杆的稳定性，建立双斜撑作用下多段桅杆的挠曲微分方程，引入边界条件，获得双斜撑作用下桅杆失稳特征方程及其提钻临界值。对ZLH43ZL（TB）-D180长螺旋钻机进行稳定性分析，将推导结果与采用ANSYS有限元方法所得结果进行对比。结果表明：推导的失稳特征方程基本正确；直接提钻工况下双斜撑长螺旋钻机桅杆的失稳临界值Fcr与主、副斜撑点位置参数λ1，λ2，桅杆截面惯性矩I和主卷扬钢丝绳角度θ等因素有关。失稳临界值Fcr随λ1和λ2的逐渐增大，先增大后减小，且λ1对Fcr的影响甚于λ2；Fcr随I的增大，先迅速增大，后逐渐平缓；Fcr随θ（0°≤θ≤20°）不断增大而缓慢增大。研究结果对工程机械中类似结构的稳定性分析有一定参考价值。
关键词：
直接提钻工况,
双斜撑,
长螺旋钻机,
失稳特征方程,
ANSYS,
失稳临界值
|
|
| [1] 刘利民.谈CFG桩施工工艺及常见问题处理[J].山西建筑,2012,38(34):71-73. LIU Li-min. Discussion on CFG pile construction technology and common problem treatment[J]. Shanxi Architecture, 2012, 38(34):71-73.
[2] 王茂桑.影响长螺旋CFG压灌桩成桩质量的几个因素[J].山西建筑,2005,31(8):58-59. WANG Mao-sang. Factors influencing the construction quality of long auger drilling CFG pressure grouting pile[J]. Shanxi Architecture, 2005, 31(8):58-59.
[3] TIMOSHENKO S P, GERE J M. Theory of elastic stability[M]. New York:McGraw-Hill, 1961:134-141.
[4] RAHAI A R, KAZEMI S. Buckling analysis of non-prismatic columns based on modified vibration modes[J]. Communications in Nonlinear Science and Numerical Simulation, 2006, 13(8):1721-1735.
[5] 楼梦麟,李建元.变截面压杆稳定问题半解析解[J].同济大学学报,2004,32(7):857-860. LOU Meng-lin, LI Jian-yuan. Semi-analtical approach for stability of variable cross-section compression bars[J]. Journal of Tongji University, 2004, 32(7):857-860.
[6] LI Guo-qiang, LI Jin-jun. A tapered Timoshenko-Euler beam element for analysis of steel portal frames[J]. Journal of Constructional Steel Research, 2002, 58(12):1531-1544.
[7] BAKER G. Exact deflection in nonprismatic members[J]. Computer & Structures, 1996, 61(3):515-528.
[8] 卞敬玲,王小岗.变截面压杆稳定计算的有限单元法[J].武汉大学学报(工学版),2002,35(4):102-104. BIAN Jing-ling, WANG Xiao-gang. FEM for calculating stability of variable cross-section compression bars[J]. Engineering Journal of Wuhan University, 2002, 35(4):102-104.
[9] 宋启根,徐梁,宋丹.变截面梁柱刚度方程的Bessel函数解[J].计算力学学报,2001,18(3):355-357. SONG Qi-gen, XU Liang, SONG Dan. Solution of stiffness equations of beam-column with varying section by Bessel function[J]. Chinese Journal of Computational Mechanics, 2001, 18(3):355-357.
[10] 陈策,兰朋,陆念力.对称双拉绳作用下起重机吊臂起升平面外稳定性分析[J].工程机械,2014,45(8):34-38. CHEN Ce, LAN Peng, LU Nian-li. Outer stability analysis of crane boom lifting plane under dual draft wire rope[J]. Construction Machinery and Equipment, 2014, 45(8):34-38.
[11] 刘士明,陆念力,孟丽霞.牵绳非保向力作用下的起重臂稳定性分析[J].哈尔滨工业大学学报,2014,46(3):26-29. LIU Shi-ming, LU Nian-li, MENG Li-xia. Stability analysis of telescopic booms under pull-rope follower force[J]. Journal of Harbin Institute of Technology, 2014, 46(3):26-29.
[12] WANG An-lin, JIANG Tao, DONG Ya-ning, et al. Study on structural instability of large crawler crane boom structure[C]//Proceedings of the 20093rd International Conference on Teachning and Computational Science, Heidelberg:Springer Verlag, 2012:401-406.
[13] 张宏生,陆念力.动臂式塔机变截面吊臂的整体稳定性分析[J].哈尔滨工业大学学报,2010,42(9):1394-1397. ZHANG Hong-sheng, LU Nian-li. Global stability analysis of the tapered luffing jib of tower crane[J]. Journal of Harbin Institute of Technology, 2010, 42(9):1394-1397.
[14] 康辉梅,何清华,谢嵩岳,等.提钻工况下旋挖钻机的受力分析[J].工程力学,2010,27(10):214-218. KANG Hui-mei, HE Qing-hua, XIE Song-yue, et al. Mechanics analysis of rotary drilling rig under drilling-bucket-lifting conditions[J]. Engineering Mechanics, 2010, 27(10):214-218.
[15] 庞浩.长螺旋钻机提钻力学行为及提钻液压控制系统研究[D].长沙:中南大学机电工程学院,2008:8-17. PANG Hao. Research on the mechanical behaviour and hydraulic control system of drill-lifting-condition of continuous flight auger driller[D]. Changsha:Central South University, College of Mechanical and Electrical Engineering, 2008:8-17.
[16] 胡均平,李科军.螺旋钻机变幅时机液耦合动力学的键合图建模[J].中南大学学报(自然科学版),2016,47(2):495-502. HU Jun-ping, LI Ke-jun. Dynamics model of mechanical-hydraulic coupling of auger driller during luffing motion by bond gragh[J]. Journal of Central South University (Science and Technology), 2016, 47(2):495-502.
[17] 孟晓平,陆念力,李良.非保向力作用下起重机吊臂起升平面外整体稳定性特征方程及应用[J].哈尔滨建筑大学学报,1997,30(2):99-103. MENG Xiao-ping, LU Nian-li, LI Liang. Crane jib out-of-the-lifting-plane stability characteristic equation and its use under follower forces[J]. Journal of Harbin University of Civil Engineering and Architecture, 1997, 30(2):99-103.
[18] 王腾飞,兰朋,陆念力.计及支座柔性的双拉杆起重臂平面外稳定性[J].华南理工大学学报(自然科学版),2015,43(6):71-76. WANG Teng-fei, LAN Peng, LU Nian-li. Out-of-plane stability of crane jib with double rods considering flexibility of fixed joint[J]. Journal of South China University of Technology (Natural Science Edition), 2015, 43(6):71-76. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
