Please wait a minute...
Chinese Journal of Engineering Design  2008, Vol. 15 Issue (5): 373-377    DOI:
    
Research on terminal-guidance ballistic model under windy condition
 ZHAO  Qing-Lan1,2, SONG  Wei-Dong1, LU   Fei3, QIAO   Liang3
1.Department of Artillery Engineering, Ordnance Engineering College, Shijiazhuang 050003, China;
2. Missile Department,  Wuhan Ordnance NonCommissioned Officer Academy, Wuhan 430000, China;
3. Beijing Military Delegation Office Located at Factory 247, Taiyuan 030009, China
Download: HTML     PDF(244KB)
Export: BibTeX | EndNote (RIS)       Supporting Info

Abstract  The existence of wind changes the direction and value of relative velocity between terminal-guidance and air, which leads to the change of direction and value of air drag and air drag acceleration as well as the related forces and moments. In order to analyze characteristics of influence of the existence of wind on the motion features of terminal-guidance, ballistic model must be established. Based on the standard ballistic model, mainly considering wx (range wind) and wz(beam wind), relative ballistic coordinate, relative velocity, relative angle of attack, relative angle of sideslip are introduced, and the projection of forces and moments are analyzed. Finally, the terminal-guidance ballistic model under windy condition is established. Through simulation, the rule of wind's influence on terminal-guidance is obtained, which establishes the foundation for further research on its ballistic characteristics.

Key words terminal-guidance      wind      ballistic      model      force      moment     
Published: 28 October 2008
Cite this article:

ZHAO Qing-Lan, SONG Wei-Dong, LU Fei, QIAO Liang. Research on terminal-guidance ballistic model under windy condition. Chinese Journal of Engineering Design, 2008, 15(5): 373-377.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2008/V15/I5/373


有风条件下末制导炮弹弹道模型研究

风的存在改变了末制导炮弹与空气的相对运动速度,导致末制导炮弹空气阻力和空气阻力加速度发生变化,与此有关的力和力矩也发生相应的变化.为了分析风的存在对末制导炮弹运动特性的影响特点,必须建立相应的弹道模型.在末制导炮弹标准弹道模型的基础上,主要考虑纵风、横风的存在,引入了相对弹道坐标系、相对速度、相对攻角、相对侧滑角的概念,分析力和力矩的投影,建立了有风条件下的末制导炮弹弹道模型.通过仿真分析,得出风对末制导炮弹的弹道影响规律,为末制导炮弹的弹道特性研究奠定基础.

关键词: 末制导炮弹,  风,  弹道,  模型,  力,  力矩 
null
[1] Zhonghang BAI,Linjing AI. Research on product ergonomics problem determination method based on functional surface drive and extension tools[J]. Chinese Journal of Engineering Design, 2023, 30(5): 531-544.
[2] Zhijun WANG,Xiaotao ZHANG,Mengxiang LI. Research on decoupling algorithm of six-dimensional force sensor based on polynomial fitting[J]. Chinese Journal of Engineering Design, 2023, 30(5): 571-578.
[3] Di ZHAO,Guo CHEN,Xiaoli CHEN,Xiongjin WANG. Terrain adaptive mechanism design and obstacle-surmounting performance analysis of wheeled search and rescue robot[J]. Chinese Journal of Engineering Design, 2023, 30(5): 579-589.
[4] Baicun WANG,Kailing ZHU,Jinsong BAO,Feng WANG,Haibo XIE,Huayong YANG. Intelligent design and scheduling optimization of painted body storage based on digital pedestal system[J]. Chinese Journal of Engineering Design, 2023, 30(4): 399-408.
[5] Zhimin GUO,Haishu DAI,Jiang ZHAI,Haocen HONG,Baicun WANG,Haibo XIE,Huayong YANG. Distributed co-simulation and dynamic optimization of axial piston pump based on FMI[J]. Chinese Journal of Engineering Design, 2023, 30(4): 495-502.
[6] Fangjian DOU,Qingying QIU,Cheng GUAN,Jinjie SHAO,Haifeng WU. Optimization design of acceleration and deceleration curve of winding machine with large moment of inertia[J]. Chinese Journal of Engineering Design, 2023, 30(4): 503-511.
[7] Jun GUAN,Yihua DING,Qingtao GE,Shuai ZHAO,Yang LU,Jie ZHANG. Rapid manufacturing of RFID antennas based on multi-material 3D printing technology[J]. Chinese Journal of Engineering Design, 2023, 30(3): 288-296.
[8] Shaojie LIU,Zhihai LI,Zhixiang LIU,Kang ZOU. Research on spatial modeling method for excavation tunnels based on laser scanning and 3D grid map[J]. Chinese Journal of Engineering Design, 2023, 30(3): 306-314.
[9] Zhan YANG,Qipeng LI,Wei TANG,Kecheng QIN,Suifan CHEN,Kaidi WANG,Yang LIU,Jun ZOU. Design and analysis of small land-air deformable amphibious robot[J]. Chinese Journal of Engineering Design, 2023, 30(3): 325-333.
[10] Guiliang CHEN,Zihao LI,Chao CAI,Yongchao LI,Dong YANG. Design and mechanism optimization of lower limb exoskeleton based on human dynamics analysis[J]. Chinese Journal of Engineering Design, 2023, 30(3): 362-371.
[11] Hongjie GUO,Shuya LIANG,Wenhua CHEN,Liqiang ZHONG,Zhewen CHEN,Jiahui YAN. Research on influence of wire spring inclination angle on storage life of wire spring hole electrical connector[J]. Chinese Journal of Engineering Design, 2023, 30(3): 390-398.
[12] Ganhua YANG,Qingjun ZENG,Chunwei HAN,Xin HUANG,Xiaoqiang DAI. Design and implementation of soft hand position tracking for human-computer interactive teleoperation robot[J]. Chinese Journal of Engineering Design, 2023, 30(2): 164-171.
[13] Yangbo LI,Gaipin CAI,Liao RUAN. Study on laminated crushing characteristics of W-ore with dual-roller crusher[J]. Chinese Journal of Engineering Design, 2023, 30(2): 212-225.
[14] Xiaocheng XIN,Wei LONG,Hao GAO,Ping WANG,Jilin LEI. Effect of calculation model on effectiveness of characteristics analysis of aerostatic bearings[J]. Chinese Journal of Engineering Design, 2023, 30(2): 226-236.
[15] Hongtai XIE,Hong WANG,Wei CHAI. Design and simulation analysis of new wind resistance braking device for high-speed trains[J]. Chinese Journal of Engineering Design, 2023, 30(2): 244-253.