Please wait a minute...
Chinese Journal of Engineering Design  2004, Vol. 11 Issue (4): 223-227    DOI:
    
Test study on beam string roof structure
 LIANG  Ji1, WU  Hui2, XIE  Zhong-Liang1, WENG  En-Hao1, PENG  Wei-Xian1
1.Department of Civil Engineering,Zhejiang Universtiy,Hangzhou 310027,China:
2.Department of Industrial and Commerical,Zhejiang Financial and Economic College,Hangzhou 31001 2,China
Download: HTML     PDF(169KB)
Export: BibTeX | EndNote (RIS)      

Abstract  According to the concept of beam string structure,a kind of circular cantilever beam string roof structure (CBSS)was presented.After the study on the structure in theory,the static and modal experiments were carried out.The analysis of the behavior of CBSS,on the full and half- span load was taken out.Through the modal experiment,the stiffness and dynamic characteristics were verified.Some conclusions are shown as follows:(1)The structure with good mechanical behavior and strong ability to resist asymmetry load,had excellent overall stability (2)The stiffness and the first natural frequency of vibration of CBSS are higher than that of the flexible suspension cable structure. (3)The location of the cables iS given,SO the construction of the structure iS easier than cable dome and the circular cable—truss structure.

Key wordscantilever roof structure      beam string structure      experiment     
Published: 28 August 2004
Cite this article:

LIANG Ji, WU Hui, XIE Zhong-Liang, WENG En-Hao, PENG Wei-Xian. Test study on beam string roof structure. Chinese Journal of Engineering Design, 2004, 11(4): 223-227.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2004/V11/I4/223


张弦梁挑蓬结构的试验研究

将张弦梁原理运用到悬臂结构,进而构造出一种环状悬臂张弦梁挑蓬结构.继理论分析之后,为了验证这种结构的受力性能,通过静力试验重点分析模型在全跨和半跨荷载下的承载规律,之后从模态试验分析中,进一步了解结构的刚度和动力特性.试验结果表明:(1)结构受力合理,抵抗非对称荷载能力较强,有很好的整体稳定性;(2)与柔性悬索结构相比,结构第1阶自振频率较高,有较好的刚度;(3)设计时给定了拉索的位置,该种结构的施工相对于索穹顶、环状索一桁张力挑蓬要容易.

关键词: 挑蓬结构,  张弦梁,  试验 
[1] Zhijun WANG,Xiaotao ZHANG,Mengxiang LI. Research on decoupling algorithm of six-dimensional force sensor based on polynomial fitting[J]. Chinese Journal of Engineering Design, 2023, 30(5): 571-578.
[2] Xuelin DU,Wenhui YI,Jiahua ZOU,Can ZHOU,Li MAO,Lishi DENG,Ying LIU. Structure design and motion realization of multi-joint snakelike robot[J]. Chinese Journal of Engineering Design, 2023, 30(4): 438-448.
[3] Yang DING,Minglu ZHANG,Xin JIAO,Manhong LI. Biomimetic structure design and compliant motion control for hexapod robot driven by joint motors[J]. Chinese Journal of Engineering Design, 2023, 30(2): 154-163.
[4] San-ping LI,Teng-jia SUN,Long-qiang YUAN,Li-guo WU. Design and experimental research of pneumatic soft picking manipulator[J]. Chinese Journal of Engineering Design, 2022, 29(6): 684-694.
[5] Fu-qiang ZHAO,Te DU,Bao-yu CHANG,Zhi-gang NIU. Dynamics analysis and experimental research on leg lifting condition of limb-leg crawler foot mechanism[J]. Chinese Journal of Engineering Design, 2022, 29(4): 474-483.
[6] Shao-yu TANG,Jie WU,Hui ZHANG,Bing-bing DENG,Yu-ming HUANG,Hao HUANG. Simulation and experimental research on temperature field of multipole magnetorheological clutch[J]. Chinese Journal of Engineering Design, 2022, 29(4): 484-492.
[7] Yue-peng WANG,Bu-yun WANG. Dynamic modeling and experimental research of lower limb exoskeleton assisted robot[J]. Chinese Journal of Engineering Design, 2022, 29(3): 358-369.
[8] MAO Jun, TIAN Bo, XIE Miao, LI Yu-qi. Construction and verification of removal model for carbon brush grinding and forming[J]. Chinese Journal of Engineering Design, 2021, 28(6): 701-708.
[9] ZHANG Qin, PANG Ye-zhong, WANG Kai. Simulation analysis and experimental research on robot pedaling weeding process[J]. Chinese Journal of Engineering Design, 2021, 28(6): 709-719.
[10] XIE Miao, ZHANG Bao-guo, WANG Peng-fei, LI Zheng. Research on active excitation cutting performance of roadheader based on similarity theory[J]. Chinese Journal of Engineering Design, 2021, 28(5): 576-584.
[11] BAI Yang-xi, CHEN Hong-yue, CHEN Hong-yan, WANG Xin, LI Jian-gang. Vibration analysis and experimental verification of shearer sliding shoes based on drum load[J]. Chinese Journal of Engineering Design, 2021, 28(3): 358-366.
[12] JIA Du-ping, MO Li, MAO Liang-jie, ZENG Song. Experimental research on vortex-induced vibration of deepwater riser-test string system[J]. Chinese Journal of Engineering Design, 2021, 28(2): 170-178.
[13] CHEN Yang, REN Cheng-zu, DENG Xiao-fan, CHEN Guang, JIN Xin-min. Research on rotating motion of cylindrical roller based on double-disc straight groove grinding[J]. Chinese Journal of Engineering Design, 2021, 28(2): 179-189.
[14] XIONG Wei, GE Zhi-hua, PANG Qiao, LI Man-di, WANG You. Theoretical design and experimental study on interference of hub bearing unit[J]. Chinese Journal of Engineering Design, 2021, 28(1): 41-47.
[15] HUANG Wei, LIU Wei-yi, LIU Zhi-en, LU Chi-hua. Structure optimization of experimental target vehicle chassis based on multi-objective genetic algorithm[J]. Chinese Journal of Engineering Design, 2021, 28(1): 80-88.