Please wait a minute...
工程设计学报
工程设计学报  2019, Vol. 26 Issue (2): 190-196    DOI: 10.3785/j.issn.1006-754X.2019.02.010
优化设计     
曲面匹配方法在刀具加工轨迹优化中的应用
何改云1, 庞凯瑞1, 桑一村1, 刘晨辉2, 王宏亮1
1.天津大学 机械工程学院 机构理论与装备设计教育部重点实验室， 天津 300350
2.天津大学 数学学院， 天津 300350
Application of surface matching method in tool path optimization
HE Gai-yun1, PANG Kai-rui1, SANG Yi-cun1, LIU Chen-hui2, WANG Hong-liang1
1.Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, School of Mechanical Engineering, Tianjin University, Tianjin 300350, China
2.School of Mathematics, Tianjin University, Tianjin 300350, China
 全文: PDF(1900 KB)   HTML
摘要： 为减小非可展直纹面侧铣过程中产生的原理误差，提出一种新的刀具加工轨迹优化方法，将曲面匹配方法应用于初始刀具加工轨迹的优化过程，并使用序列二次规划算法求解曲面匹配问题。首先，采用现有的刀具加工轨迹生成方法得到刀轴轨迹曲面；其次，对刀轴轨迹曲面进行法向偏移得到对应的刀具加工包络面并进行原理误差计算，使用基于序列二次规划算法的曲面匹配方法对加工包络面与设计曲面进行曲面逼近，得到空间变换矩阵；再次，通过空间变换和法向偏移，得到优化后的刀轴轨迹曲面及其对应的刀具加工包络面，以及对应的优化刀具加工轨迹及加工误差分布数据；最后，使用MATLAB进行仿真，并与基于最小二乘法的曲面匹配方法进行对比验证。仿真结果表明该优化方法有效地减小了初始刀具加工轨迹产生的原理误差，这说明提出的方法能够用于减小非可展直纹面侧铣加工时产生的原理误差。研究成果为提高非可展直纹面侧铣的精度提供了新的技术支持。
Abstract: In order to reduce the principle error generated in the flank milling process of undevelopable ruled surface, a new optimization method for tool path was proposed. Surface matching method was applied to optimize the initial tool path, and the sequential quadratic programming algorithm was used to solve the surface matching problem. Firstly, the existing tool path generation method was used to obtain the tool axis trajectory surface. Secondly, the envelope surface was achieved by offsetting the tool axis trajectory surface along its normal vector, and the principle error was calculated. The surface matching method based on the sequential quadratic programming algorithm was operated to match the envelope surface with the design surface and a spatial transformation matrix was obtained. Thirdly, an optimized tool axis trajectory surface and its corresponding envelope surface were generated, and the corresponding optimized tool path and the error distribution data were obtained. Finally， the simulation was performed by MATLAB and compared with the surface matching method based on least square method. The simulation result showed that the proposed method reduced the principle error of the initial tool path effectively, which indicated that the proposed method could apply to reduce the principle error in the flank milling process of the undevelopable ruled surface. The research results provide a new technical way to improve the accuracy of undevelopable ruled surface flank milling.
收稿日期: 2018-09-12 出版日期: 2019-04-28
CLC:  TH 12  
基金资助: 国家自然科学基金资助项目（51675378）；国家科技重大专项资金资助项目（2014ZX04014-031）
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

何改云, 庞凯瑞, 桑一村, 刘晨辉, 王宏亮. 曲面匹配方法在刀具加工轨迹优化中的应用[J]. 工程设计学报, 2019, 26(2): 190-196.

HE Gai-yun, PANG Kai-rui, SANG Yi-cun, LIU Chen-hui, WANG Hong-liang. Application of surface matching method in tool path optimization. Chinese Journal of Engineering Design, 2019, 26(2): 190-196.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2019.02.010    或    https://www.zjujournals.com/gcsjxb/CN/Y2019/V26/I2/190

[1] 张嘉宁,张明路,李满宏,张坦. 面向灰库清理的超大伸缩比机械臂结构设计与刚度优化[J]. 工程设计学报, 2022, 29(4): 430-437.
[2] 王晨,高波,杨旭. Stewart式六维力传感器轻量化设计[J]. 工程设计学报, 2022, 29(4): 419-429.
[3] 王景良,朱天成,朱龙彪,许飞云. 连续体结构的变密度拓扑优化方法研究[J]. 工程设计学报, 2022, 29(3): 279-285.
[4] 孙光明,王奕苗,万仟,弓堃,汪文津,赵坚. 考虑装配变形的精密机床床身优化设计[J]. 工程设计学报, 2022, 29(3): 318-326.
[5] 马超群,张凯,柴麟,刘宝林,周琴. 机械式自动垂直钻具执行机构内部流场规律研究[J]. 工程设计学报, 2022, 29(3): 384-393.
[6] 芮宏斌,李路路,曹伟,王天赐,段凯文,吴莹辉. 轮-履-腿复合仿生机器人步态规划及越障性能分析[J]. 工程设计学报, 2022, 29(2): 133-142.
[7] 廖红玉,邓梦洋,周敏,谢良喜,姚俊夫. 基于钢丝绳传动的自动抹灰机的轻量化设计[J]. 工程设计学报, 2022, 29(2): 196-201.
[8] 丰飞,傅雨晨,范伟,马举. 三角混合两级杠杆微位移放大机构的设计及性能分析[J]. 工程设计学报, 2022, 29(2): 161-167.
[9] 辛传龙,郑荣,任福琳,梁洪光. AUV接驳装置悬浮平衡分析与配重优化设计[J]. 工程设计学报, 2022, 29(2): 176-186.
[10] 徐云杰,沈俞,胡飞,贾良权,祁亨年. 基于TDLAS的批量种子活力检测装置设计[J]. 工程设计学报, 2022, 29(2): 231-236.
[11] 陶晓东, 郭安福, 李辉, 韩伟, 李万才, 李涛. 基于灵敏度分析的盘式开沟机性能分析及优化[J]. 工程设计学报, 2022, 29(1): 59-65.
[12] 樊霄岳, 刘启, 官威, 朱云, 陈苏琳, 沈彬. 电磁微锻机构热效应模拟与实验研究[J]. 工程设计学报, 2022, 29(1): 66-73.
[13] 钟道方, 田颖, 张明路. 轮腿式爬壁机器人的永磁吸附装置设计与优化[J]. 工程设计学报, 2022, 29(1): 41-50.
[14] 王碧海, 张健, 陈永亮, 彭庆金, 顾佩华. 盾构螺旋输送机适应性设计智能决策[J]. 工程设计学报, 2022, 29(1): 1-9.
[15] 张勤, 庞业忠, 王凯. 机器人踩踏式除草过程仿真分析与试验研究[J]. 工程设计学报, 2021, 28(6): 709-719.