Please wait a minute...
J4  2011, Vol. 45 Issue (10): 1821-1826    DOI: 10.3785/j.issn.1008-973X.2011.10.021
    
High precision pressure control in large closed water volume
NIE Yong, WANG Qing-feng, TANG Jian-zhong
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

A water pressure control method was proposed based on electro-hydraulic pressure control in order to simulate the dynamic water pressure of the special equipment worked and test the performance of sealing device. A large closed volume water pressure control system, including the pressure transfer device and electro-hydraulic pressure control system, was designed. A “Fuzzy+PID” compound control strategy was proposed by analyzing the model of the water pressure control system. Experimental results show that the control range of the pressure is from 0.1 MPa to 10 MPa, the steady-state error is ±0.04 MPa, and the maximum slope trail is ±2 MPa/s.



Published: 01 October 2011
CLC:  TH 137  
Cite this article:

NIE Yong, WANG Qing-feng, TANG Jian-zhong. High precision pressure control in large closed water volume. J4, 2011, 45(10): 1821-1826.

URL:

https://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2011.10.021     OR     https://www.zjujournals.com/eng/Y2011/V45/I10/1821


较大密闭容腔的高精度水压控制

为了精确模拟水下特种设备工作环境中外部水压的动态变化过程,检验密封装置的密封性能,提出一种基于电液力控制的水压控制方法.设计并建立包含压力传递装置、电液力控制系统等部分的较大密闭容腔水压控制系统.通过分析系统的数学模型,提出“Fuzzy+PID”复合控制策略进行水压控制.在建立的实验系统上进行实验研究.实验结果表明,水压可控范围为0.1~10 MPa,稳态误差为±0.04 MPa,压力无失真斜坡跟踪最大速率可达±2 MPa/s.

[1] 刘子俊,催皆凡.海洋机器人用水下电机的深水密封研究[J].机器人,1997,19(1): 61-64.
LIU Zijun, CUI Jiefan. Research on the deepwater seal for underwater motor of underwater robot [J]. Robot, 1997, 19(1): 6164.[2] 杨华勇,周华,路甬祥.水液压技术的研究现状与发展趋势[J].中国机械工程,2000, 11(12): 1430-1433.
YANG Huayong, ZHOU Hua, LU Yongxiang. Research achievements and developing trends of water hydraulics [J]. China Mechanical Engineering, 2000, 11(12): 1430-1433.
[3] 宋申明,张克,张炳通,等.航天器壳体压力自动加载系统的研究[J].宇航学报,2005, 26(4): 499-504.
SONG Shenming, ZHANG Ke, ZHANG Bingtong, et al. Research on automatic pressure force loading system for shell of spacecraft [J]. Journal of Astronautics, 2005, 26(4): 499-504.
[4] VOSSOUGHI G, DONATH M. Dynamic feedback linearization for electrohydraulically actuated control systems [J]. Journal of Dynamic Systems, Measurement, and Control, 1995, 117(4): 190-195.
[5] 杨军宏,尹自强,李圣怡.阀控非对称液压缸的非线性建模及其反馈线性化[J].机械工程学报,2006, 42(5): 203-207.
YANG Junhong, YIN Ziqiang, LI Shengyi. Nonlinear modelling and feedback linearization of valvecontrolled asymmetrical cylinder [J]. Chinese Journal of Mechanical Engineering, 2006, 42(5): 203-207.
[6] YAO B, BU F, REEDY J, et al. Adaptive robust motion control of signalrod hydraulic actuators: theory and experiment [J]. The IEEE/ASME Transactions on Mechatronics, 2000, 5 (1): 79-91.
[7] 张恩勤,施颂椒,高卫华,等.模糊控制系统近年来的研究与发展[J].控制理论与应用,2001,18(1): 7-11.
ZHANG Enqin, SHI Songjiao, GAO Weihua, et al. Recent researches and developments on fuzzy control system [J]. Control Theory and Applications, 2001, 18(1): 7-11.
[8] 陆玲霞,汪雄海.基于模糊控制的电磁水热系统研究[J].浙江大学学报:工学版,2008, 42(4): 598-601.
LU Lingxia, WANG Xionghai. Electromagnetic water heating system based on fuzzy controller [J]. Journal of Zhejiang University: Engineering Science, 2008, 42(4): 598-601.
[9] LEE C. Fuzzy logic in control systems: fuzzy logic controllerpart I [J]. IEEE Transactions on Systems, Man and Cybernetics, 1990, 20(2): 404-418.

[1] DING Chuan, DING Fan, ZHOU Xing, MAN Zai-peng, YANG Can-jun. Design and comparative experimental study of novel pressure-resistant oil-immersed proportional actuator[J]. J4, 2014, 48(3): 451-455.
[2] SONG Yue-chao, XU Bing, YANG Hua-yong, ZHANG Jun-hui. Modified practical approximate method for testing source flow of piston pump[J]. J4, 2014, 48(2): 200-205.
[3] MAN Zai-peng,DING Fan,DING Chuan,LIU Shuo,HUANG Ting-feng. Development and research overview on impulse test of hydraulic hose[J]. J4, 2014, 48(1): 21-28.
[4] SHI Hu, YANG Hua-yong, GONG Guo-fang, HOU Dian-qing. Definition and evaluation method for compliance of thrust hydraulic system for shield tunneling machine[J]. J4, 2013, 47(8): 1444-1449.
[5] HOU Dian-qing, GONG Guo-fang, SHI Hu, WANG Lin-tao. Design of new propulsion system of shield tunneling machine based on compliance characteristics [J]. J4, 2013, 47(7): 1287-1292.
[6] SHI Hu, YANG Hua-yong, GONG Guo-fang, WANG Lin-tao. Key technologies of shield tunneling machine and present status and prospect of test rigs for tunneling simulation [J]. J4, 2013, 47(5): 741-749.
[7] WEI Jian-hua, GUO Kai, XIONG Yi. Synchronized motion control for multi-axis electro-hydraulic system of large equipment[J]. J4, 2013, 47(5): 755-760.
[8] HOU Dian-qing, GONG Guo-fang, SHI Hu, WANG Lin-tao. Compliance characteristics of propulsion system of
shield tunneling machine under sudden load
[J]. J4, 2013, 47(3): 522-527.
[9] ZHU Xu, WEI Jian-hua, FANG Jin-hui. Dynamic characteristics of pilot-operated electro-hydraulic
flow distribution system
[J]. J4, 2013, 47(2): 193-200.
[10] ZHANG Yan-ting, QU Ying-feng, LIU Zhen-dong, MA Jiang-tao. Design of swing device for crown-block heave compensation system[J]. J4, 2012, 46(12): 2268-2273.
[11] DU Heng, WEI Jian-hua, FENG Rui-lin. Modeling, simulation and experimental research
on pressure tracking valve
[J]. J4, 2012, 46(6): 1034-1040.
[12] FANG Jin-hui, WEI Jian-hua, KONG Xiao-wu. Synchronous control strategy for paralleled servo valves[J]. J4, 2012, 46(6): 1054-1059.
[13] MAN Jun , DING Fan , LI Qi-peng , DA Jing , SHAO Sen-yin. Study of high-pressure high-speed on-off solenoid using
permanent magnet shield
[J]. J4, 2012, 46(2): 309-314.
[14] GUAN Cheng, XU Xiao, LIN Xiao, WANG Shou-hong. Recovering system of swing braking energy in hydraulic excavator[J]. J4, 2012, 46(1): 142-149.
[15] HUANG Jia-hai,WEI Jian-hua, QIU Min-xiu. Investigation on the transmission characteristics of hydroviscous drive[J]. J4, 2011, 45(11): 1927-1933.