Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
机械工程     
考虑气隙变化的高速电主轴热特性仿真
李特, 芮执元, 雷春丽, 郭俊锋, 胡赤兵
1.兰州理工大学 数字制造技术与应用省部共建教育部重点实验室,甘肃 兰州 730050；
2.兰州理工大学 机电工程学院,甘肃 兰州 730050
Simulation of thermal characteristics of high speed spindle considering air gap variation
LI Te,Rui Zhi yuan,LEI Chun li,GUO Jun feng,HU Chi bing
1. Key Laboratory of Digital Manufacturing Technology and Application,The Ministry of Education.
Lanzhou University of Technolagy,Lanzhou 730050,China；
2.College of MechanoElectronic Engineering,Lanzhou University of Technology, Lanzhou 730050,China
 全文: PDF(1169 KB)   HTML
摘要：

为了解决电主轴高速旋转时结构变化引起的自身热特性改变的问题,提出离心膨胀和热膨胀会影响电主轴内定、转子间对流换热的观点.基于弹性力学理论,计算电主轴定、转子受离心力和热载荷而产生的径向膨胀量及由此导致的气隙变化量；根据对流换热理论得出离心力影响下泰勒数随转速和气隙长度的变化规律以及对流换热系数的变化规律.计算发现,气隙长度随定、转子的膨胀而减小,该减小量占设计值的377%；泰勒数随转速升高而增大,随气隙长度增大而减小；对流换热系数随气隙长度增加而降低,使得定、转子间传热受到抑制.结果表明,若能提高气隙间对流换热系数,适当提升油水冷却功率,能够大幅度降低主轴转子温升和热位移,提高加工精度.
Abstract:

A viewpoint on the centrifugal expansion and thermal expansion which would affect the convection heat transfer between stator and rotor of high speed spindle was proposed to solve the problem that the thermal characteristics caused by structure variation of high speed spindle would be changed under high rotation speed. Based on the theory of elastic mechanics, radical expansion and air gap changes which caused by the radical expansion were calculated considering the two expansions acting on the stator and rotor of spindle. Variation rules of air gap and convection heat transfer coefficient that affected by the centrifugal force were obtained according to the convection heat transfer theory. The calculation results show that the air gap length decreases with the expansion of the rotor, and the reduction is 377% of the design value. The Taylor number increases with the increase of the rotating speed, while decreases with the increase of the air gap length. The heat transfer coefficient of air gap decreases with the increase of air gap length, so that the heat transfer between the stator and rotor is restrained. Results show that  the temperature rises and thermal displacement can be  significantly reduced if the convection heat transfer coefficient and the cooling power can be  properly promoted, then the machining accuracy can be improved．
出版日期: 2017-01-14
:     
基金资助:

 国家自然科学基金资助项目（51465035，51465034）；国家重大数控专项资助项目(2010 ZX04001032)；甘肃省青年科技基金计划资助项目(145RJYA307).
通讯作者: 芮执元，男，教授. ORCID: 0000000322518014.     E-mail: zhiy_rui@163.com.
作者简介: 李特（1987-），男，博士生，从事高速电主轴动态性能等研究.ORCID: 0000000197340404. E-mail:lite126126@126.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

李特, 芮执元, 雷春丽, 郭俊锋, 胡赤兵. 考虑气隙变化的高速电主轴热特性仿真[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008973X.2016.05.018.

LI Te,Rui Zhi yuan,LEI Chun li,GUO Jun feng,HU Chi bing. Simulation of thermal characteristics of high speed spindle considering air gap variation. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008973X.2016.05.018.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2016.05.018    或    http://www.zjujournals.com/eng/CN/Y2016/V50/I5/941

［1］ BOSSMANNS B, TU J F. A thermal model for high speed motorized spindles［J］. International Journal of Machine Tools and Manufacture, 1999, 39(9): 1345-1366．
［2］ BOSSMANNS B, TU J F. A power flow model for high speed motorized spindles—heat generation characterization ［J］. Journal of Manufacturing Science and Engineering, 2001, 123(3): 494-505．
［3］ JORGENSEN B R, SHIN Y C. Dynamics of machine tool spindle/bearing systems under thermal growth［J］. Journal of Tribology, 1997, 119(4): 875-882．
［4］ LI H, SHIN Y C. Integrated dynamic thermomechanical modeling of high speed spindles, part 1: model development［J］. Journal of Manufacturing Science and Engineering, 2004, 126(1): 148-158．
［5］ 陈小安,张朋,合烨,等. 高速电主轴功率流模型与热态特性研究［J］. 农业机械学报,2013,44(9):250-254．
CHEN Xiaoan, ZHANG Peng, HE Ye, et al. Power flow model of high speed motorized spindles and its thermal characteristics ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2013,(44)09:250-254．
［6］ MIN X, SHUYUN J, YING C. An improved thermal model for machine tool bearings［J］.  International Journal of Machine Tools and Manufacture, 2007, 47(1): 53-62．
［7］ HOWEY D A, CHILDS P R N, Holmes A S. Airgap convection in rotating electrical machines［J］. IEEE Transactions on Industrial Electronics, 2012, 59(3): 1367-1375．
［8］ YANG Z, SUN M, LI W, et al. Modified Elman network for thermal deformation compensation modeling in machine tools［J］. The International Journal of Advanced Manufacturing Technology, 2011, 54(5/8): 669-676．
［9］ LI D, FENG P, ZHANG J, et al. Calculation method of convective heat transfer coefficients for thermal simulation of a spindle system based on RBF neural network［J］. The International Journal of Advanced Manufacturing Technology, 2014, 70(5/8): 1445-1454．
［10］ 王保民,胡赤兵,孙建仁,等. 高速电主轴热态特性的ANSYS仿真分析［J］. 兰州理工大学报,2009,(35)1:28-31．
WANG Baomin, HU Chibing, SUN Jianren, et al, Simulation analysis of thermal characteristics of highspeed motorized spindle by using ANSYS［J］. Journal of Lanzhou university of technology, 2009,35(1):28-31．
［11］ HAITAO Z, JIANGUO Y, JINHUA S. Simulation of thermal behavior of a CNC machine tool spindle［J］. International Journal of Machine Tools and Manufacture, 2007, 47(6): 1003-1010．
［12］ ABELE E, ALTINTAS Y, BRECHER C. Machine tool spindle units［J］. CIRP AnnalsManufacturing Technology, 2010, 59(2): 781-802．
［13］ CHEN J S, HSU W Y. Characterizations and models for the thermal growth of a motorized high speed spindle［J］. International Journal of Machine Tools and Manufacture, 2003, 43(11): 1163-1170．
［14］ 王保民, 胡赤兵, 邬再新, 等. 高速电主轴定转子的气隙变化及影响因素［J］. 兰州理工大学学报, 2009, 34(6): 40-42．
WANG Baomin, HU Chibing, WU Zaixin, et al. Analysis of variation in airgap between rotor and stator in highspeed motorized spindle ［J］. Journal of Lanzhou university of technology, 2009, 34(6): 40-42．
［15］ Chang C F, Chen J J. Vibration monitoring of motorized spindles using spectral analysis techniques［J］. Mechatronics, 2009, 19(5): 726-734．
［16］ GNTHER P, DREIER F, PFISTER T, et al. Measurement of radial expansion and tumbling motion of a highspeed rotor using an optical sensor system［J］. Mechanical Systems and Signal Processing, 2011, 25(1): 319-330．
［17］ 徐秉业,刘信声.应用弹塑性力学［M］.北京,清华大学出版社,1995:203205,237-241．
［18］ NAKAJIMA K. Thermal contact resistance between balls and rings of a bearing under axial, radial, and combined loads ［J］. Journal of thermophysics and heat transfer, 1995, 9(1): 88-95．
［19］ JIANG S, MAO H. Investigation of variable optimum preload for a machine tool spindle［J］. International Journal of Machine Tools and Manufacture, 2010, 50(1): 1928．
［20］ 王保民. 电主轴热态特性对轴承—转子系统动力学特性的影响研究［D］.兰州：兰州理工大学,2009．
WANG Baomin. Study on thermal characteristics of highspeed motorized spindle and its effects on dynamic characteristics of ball bearingrotor system［D］. Lanzhou: Lanzhou university of technology, 2009:18-33．
［21］ STATON D A, CAVAGNINO A. Convection heat transfer and flow calculations suitable for electric machines thermal models［J］. IEEE Transactions on Industrial Electronics, 2008, 55(10): 3509-3516．
［22］ 张丽秀. 电主轴单元电磁特性及控制策略改善研究［D］.大连：大连理工大学,2012:88-90．
[1] 董凯, 赖俊英, 钱晓倩, 詹树林, 阮方. 夏热冬冷地区居住建筑水平式外遮阳节能效果[J]. 浙江大学学报(工学版), 2016, 50(8): 1431-1437.
[2] 李佳琦, 范利武, 俞自涛. 超亲水表面在淬火冷却过程中的沸腾传热特性[J]. 浙江大学学报(工学版), 2016, 50(8): 1493-1498.
[3] 江衍铭, 张建全, 明焱. 集合神经网络的洪水预报[J]. 浙江大学学报(工学版), 2016, 50(8): 1471-1478.
[4] 钟崴, 彭梁, 周永刚, 徐剑, 从飞云. 基于小波包分析和支持向量机的锅炉结渣诊断[J]. 浙江大学学报(工学版), 2016, 50(8): 1499-1506.
[5] 夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[6] 李林玉, 吴张华, 余国瑶, 戴巍, 罗二仓. 直线压缩机电声转换特性的实验[J]. 浙江大学学报(工学版), 2016, 50(8): 1529-1536.
[7] 曲巍崴, 唐伟, 毕运波, 李少波, 罗水均. 避免强迫装配和提升效率的预连接工艺规划[J]. 浙江大学学报(工学版), 2016, 50(8): 1561-1569.
[8] 胡小东, 顾临怡, 张范蒙. 应用于数字变量马达的高速开关阀[J]. 浙江大学学报(工学版), 2016, 50(8): 1551-1560.
[9] 杨姝, 刘国平, 亓昌, 王大志. 金属空心球梯度泡沫结构抗冲击特性仿真与优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1593-1599.
[10] 杨章, 童根树, 张磊. 对称布置2根单侧加劲肋的有效刚度[J]. 浙江大学学报(工学版), 2016, 50(8): 1446-1455.
[11] 蒋翔, 童根树, 张磊. 耐火钢-混凝土组合梁抗火性能试验[J]. 浙江大学学报(工学版), 2016, 50(8): 1463-1470.
[12] 单华峰, 夏唐代, 俞峰, 胡军华, 潘金龙. 地下增层开挖托换桩的屈曲稳定临界荷载分析[J]. 浙江大学学报(工学版), 2016, 50(8): 1425-1430.
[13] 辜天来,张帅,郑耀. 咽式进气道/等直隔离段的反压特性[J]. 浙江大学学报(工学版), 2016, 50(7): 1418-1424.
[14] 程时伟, 陆煜华, 蔡红刚. 移动设备眼动跟踪技术[J]. 浙江大学学报(工学版), 2016, 50(6): 1160-1166.
[15] 郭浩东, 陈岭, 丁永锋, 陈根才. 运动识别中基于主题的特征构建方法[J]. 浙江大学学报(工学版), 2016, 50(6): 1149-1154.