| 土木工程、交通工程 |
|
|
|
|
| 超大直径盾构管片拼装机关键技术 |
贾连辉( ),李太运*() |
| 中铁工程装备集团有限公司，河南 郑州 450016 |
|
| Key technologies of segment erector for super-large shield machine |
| Lian-hui JIA(),Tai-yun LI*() |
| China Railway Engineering Equipment Group Limited Company, Zhengzhou 450016, China |
| 1 |
张碧, 赵海峰, 杨涛, 等 盾构管片拼装机国内外研究现状[J]. 矿山机械, 2014, 42 (4): 1- 6
ZHANG Bi, ZHAO Hai-feng, YANG Tao, et al Research status of segment erector in shield tunneling machine at home and abroad[J]. Mining and Processing Equipment, 2014, 42 (4): 1- 6
|
| 2 |
YANG H Y, SHI H, GONG G F, et al Electro-hydraulic proportional control of thrust system for shield tunneling machine[J]. Automation in Construction, 2009, 18 (7): 950- 956
doi: 10.1016/j.autcon.2009.04.005
|
| 3 |
陈馈 琼州海峡隧道超大直径盾构新技术展望[J]. 隧道建设, 2014, 34 (7): 603- 607
CHEN Kui Prospect of new technology of oversize shield in Qiongzhou channel tunnel[J]. Tunnel Construction, 2014, 34 (7): 603- 607
doi: 10.3973/j.issn.1672-741X.2014.07.001
|
| 4 |
陈健, 黄永亮 超大直径泥水盾构施工难点与关键技术总结[J]. 地下空间与工程学报, 2015, 11 (Suppl.2): 637- 644
CHEN Jian, HUANG Yong-liang Summary of key technologies and construction difficulties in large diameter slurry shield tunnel[J]. Chinese Journal of Underground Space and Engineering, 2015, 11 (Suppl.2): 637- 644
|
| 5 |
刘金刚, 王凯, 廖金军 抑制管片拼装机起步冲击的模糊控制算法研究[J]. 机械科学与技术, 2017, 36 (2): 286- 291
LIU Jin-gang, WANG Kai, LIAO Jin-jun Study on fuzzy control algorithm for restraining starting impact of segment erector[J]. Mechanical Science and Technology for Aerospace Engineering, 2017, 36 (2): 286- 291
|
| 6 |
李锁牢, 李明辉 基于AMESim的盾构管片拼装机液压回转系统仿真分析[J]. 液压与气动, 2017, (1): 35- 38
LI Suo-lao, LI Ming-hui Simulation analysis based on AMESim for shield segment erector hydraulic rotary system[J]. Chinese Hydraulics and Pneumatics, 2017, (1): 35- 38
doi: 10.11832/j.issn.1000-4858.2017.01.008
|
| 7 |
李宏波, 周建军, 张兵, 等 超大直径盾构管片拼装机液压和电控系统设计[J]. 液压与气动, 2016, (11): 36- 41
LI Hong-bo, ZHOU Jian-jun, ZHANG Bing, et al The design of hydraulic system and electric control system for extra-large diameter shield erector[J]. Chinese Hydraulics and Pneumatics, 2016, (11): 36- 41
doi: 10.11832/j.issn.1000-4858.2016.11.007
|
| 8 |
孙志超, 黄晓华 基于AMEsim盾构机管片拼装系统的建模与仿真[J]. 机床与液压, 2013, 41 (13): 144- 146
SUN Zhi-chao, HUANG Xiao-hua Modeling and simulation of segment erector system for shield tunnel machine based on AMESim[J]. Machine Tool and Hydraulics, 2013, 41 (13): 144- 146
doi: 10.3969/j.issn.1001-3881.2013.13.041
|
| 9 |
周倜. 小直径全断面掘进机管片拼装机液压系统设计及仿真[D]. 长春: 吉林大学, 2009.
ZHOU Ti. Simulation and design on hydraulic system for shield machine segment erector [D]. Changchun: Jilin University, 2009.
|
| 10 |
陈馈, 冯欢欢 盾构管片拼装模拟装置液压系统设计与仿真分析[J]. 液压气动与密封, 2014, 34 (9): 11- 14
CHEN Kui, FENG Huan-huan Design and study on the hydraulic system of a shield segment assembling simulator[J]. Hydraulics Pneumatics and Seals, 2014, 34 (9): 11- 14
doi: 10.3969/j.issn.1008-0813.2014.09.005
|
| 11 |
丁书福. 盾构管片拼装机电液控制系统研究[D]. 杭州: 浙江大学, 2005.
DING Shu-fu. The research of the electro-hydraulic control system of the shield's erector [D]. Hangzhou: Zhejiang University, 2005.
|
| 12 |
LI G, CHEN Y D, WANG B, et al Dynamics simulation of asix -dof tunnel segment erector for tunnel boring machine based on virtual prototype[J]. Applied Mechanics and Materials, 2013, 251: 231- 234
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
| |
Shared |
|
|
|
|
| |
Discussed |
|
|
|
|
