Please wait a minute...
Chinese Journal of Engineering Design  2010, Vol. 17 Issue (5): 334-338    DOI:
    
Simulation analysis of lander soft landing's stability based on ADAMS
 LONG  Lv-Bo, QING  Qi-Xiang, WEN  Gui-Lin, JIANG  Sheng
Institute of Space Technology, State Key Laboratory of Advanced Design and Manufacturing for Vehicle Body,
 Hunan University, Changsha 410082, China
Download: HTML     PDF(1377KB)
Export: BibTeX | EndNote (RIS)      

Abstract   Based on the Bekker soil pressure-bearing model, Janosi shear model and principles of plastic deformation, the interaction model of arch support of the lander and lunar soil and the aluminum honeycomb model were built separately, and on this basement a more accurate overall multibody dynamic model of lander was established by the ADAMS software. Combined with the measure method of force-angle stability, the authors have proposed a proper criterion for the safety of the soft landing stability for the lander. For the different circumstances of the moon surface and initial landing state of the lander, the authors have simulated the collision process of the soft landing on the rigid or simulative moon surface for the lander through numerical calculation. The impact of the landing circumstances and initial conditions on the stability of soft landing was specially analyzed, and the stability boundary curve of the relationship between different yaw angles and ultimate lateral speeds when the lander overturning is also obtained. Meanwhile, according to the stability boundary curve, the worst working case is found out, which happens when the yaw angle is 22.5° when the allowance of the ultimate lateral speeds is the smallest, and thereby the results provide the guidelines for choosing moon environment and initial conditions for implementing soft landing of the lander successfully.

Key wordslander      soft landing      stability      simulation analysis     
Published: 28 October 2010
Cite this article:

LONG Lv-Bo, QING Qi-Xiang, WEN Gui-Lin, JIANG Sheng. Simulation analysis of lander soft landing's stability based on ADAMS. Chinese Journal of Engineering Design, 2010, 17(5): 334-338.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2010/V17/I5/334


基于ADAMS的着陆器软着陆稳定性仿真分析

基于土壤Bekker承压模型、Janosi剪切模型和塑性大变形原理分别建立着陆器足垫月壤相互作用模型及铝蜂窝的力学模型,在此基础上应用ADAMS软件构建准确的着陆器整体的多体动力学模型,并结合力-角稳定性度量法,为着陆器安全软着陆提出了合理的稳定性判据.针对不同月面环境与着陆器着陆初始状态,通过数值计算模拟了着陆器在刚性或模拟月面上的软着陆冲击过程,着重分析了月面着陆环境和初始条件对软着陆稳定性的影响,并获得了着陆器发生倾覆时不同着陆偏航角与极限水平速度关系的稳定性边界曲线.同时,根据其边界稳定性曲线,找出了最恶劣工况,即偏航角为22.5°时的工况所容许的极限水平速度最小,工况最为恶劣.以上研究为着陆器实现软着陆月面环境和初始条件的选择或类似的工程设计提供指导方案.

关键词: 着陆器,  软着陆,  稳定性,  仿真分析 
[1] Yuchun KUANG,Hui ZHONG,Liangchun ZHONG. Design and research of screw motor with quasi circular-arc contour-pattern[J]. Chinese Journal of Engineering Design, 2023, 30(5): 640-649.
[2] Zhan YANG,Qipeng LI,Wei TANG,Kecheng QIN,Suifan CHEN,Kaidi WANG,Yang LIU,Jun ZOU. Design and analysis of small land-air deformable amphibious robot[J]. Chinese Journal of Engineering Design, 2023, 30(3): 325-333.
[3] Dong ZHANG,Pei YANG,Zhexuan HUANG,Lingyu SUN,Minglu ZHANG. Design and optimization of pendulous magnetic adsorption mechanism for wall-climbing robots[J]. Chinese Journal of Engineering Design, 2023, 30(3): 334-341.
[4] Jie YANG,Zhuang-zhuang PENG,Shi-jie WANG,Cong MA,Long WANG,Guo-lin DUAN. Study on fuzzy neural network PID stability control for extrusion force of ceramic slurry 3D printer[J]. Chinese Journal of Engineering Design, 2023, 30(1): 65-72.
[5] Shao-yu TANG,Jie WU,Hui ZHANG,Bing-bing DENG,Yu-ming HUANG,Hao HUANG. Simulation and experimental research on temperature field of multipole magnetorheological clutch[J]. Chinese Journal of Engineering Design, 2022, 29(4): 484-492.
[6] FAN Xiao-yue, LIU Qi, GUAN Wei, ZHU Yun, CHEN Su-lin, SHEN Bin. Simulation and experimental research on thermal effect of electromagnetic micro hammer peening mechanism[J]. Chinese Journal of Engineering Design, 2022, 29(1): 66-73.
[7] ZHANG Qin, PANG Ye-zhong, WANG Kai. Simulation analysis and experimental research on robot pedaling weeding process[J]. Chinese Journal of Engineering Design, 2021, 28(6): 709-719.
[8] ZHANG Shen-tong. Analysis of landing load of aircraft landing gear based on virtual prototype technology[J]. Chinese Journal of Engineering Design, 2021, 28(6): 758-763.
[9] CHEN Zhen, XIONG Tao, YANG Yan-qing, XUE Xiao-wei. Sealing performance analysis and structure optimization of sealing ring of soluble ball seat[J]. Chinese Journal of Engineering Design, 2021, 28(6): 720-728.
[10] YU Ru-fei, KOU Xin, CHEN Wei. Simulation analysis of novel surface texture based on CFD[J]. Chinese Journal of Engineering Design, 2021, 28(4): 466-472.
[11] ZENG Guang, BIAN Qiang, ZHAO Chun-jiang, YIN Yu-feng, FENG Yi-jie. Analysis of stability and vibration characteristics of angular contact ball bearing cage under variable parameters[J]. Chinese Journal of Engineering Design, 2020, 27(6): 735-743.
[12] WANG Yu-pu, CHENG Wen-ming, DU Run, WANG Shu-biao, YANG Xing-zhou, ZHAI Shou-cai. Simulation analysis of wind load response for large gantry crane[J]. Chinese Journal of Engineering Design, 2020, 27(2): 239-246.
[13] HUANG Ze-hao, ZHANG Zhen-hua, HUANG Xu, LEI Wei. Analysis of time-varying characteristics of braking instability of drum brake[J]. Chinese Journal of Engineering Design, 2019, 26(6): 714-721.
[14] HAO Di-long, HE Xia, WANG Guo-rong, YI Jian-guo, CHEN Zhang-bin. Structure optimization of integral slip groove[J]. Chinese Journal of Engineering Design, 2019, 26(5): 534-543.
[15] WANG Ke-fei, SHI Pei-cheng, PENG Shan-shan, DIAO Jie-sheng. Static stiffness analysis of automotive BIW under different boundary constraint conditions[J]. Chinese Journal of Engineering Design, 2019, 26(4): 441-451.