Please wait a minute...
Chinese Journal of Engineering Design  2010, Vol. 17 Issue (4): 317-320    DOI:
    
Research on feasibility of accelerated degradation test for aerospace electrical connector
 LIN  Rui-Jin1, CHEN  Wen-Hua2, LIU  Juan1, GAO  Liang1, PAN  Jun2
1. Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China;
2. School of Mechanical and Automatic Control, Zhejiang Sci-Tech University, Hangzhou 310018, China
Download: HTML     PDF(1184KB)
Export: BibTeX | EndNote (RIS)      

Abstract  As few or no failures occur during accelerated life test for aerospace electrical connector, which is high reliable and long-lifetime, it is difficult to assess reliability with traditional life test methods. Failure mode and contact performance variation of electrical connector in long-term storage condition was analyzed; the possibility of the performance degradation of the electrical connector was illustrated, which was proved by the test data of electrical connector in long-term storage. Then by analyzing the contact performance data under temperature accelerated stress, the accelerated ability of electrical connector performance degradation was demonstrated, and the authors deduce the law of performance degradation for aerospace electrical connector.

Key wordselectrical connector      performance degradation      reliability      accelerated testing     
Published: 28 August 2010
CLC:  TB 114.3  
  V 442  
Cite this article:

LIN Rui-Jin, CHEN Wen-Hua, LIU Juan, GAO Liang, PAN Jun. Research on feasibility of accelerated degradation test for aerospace electrical connector. Chinese Journal of Engineering Design, 2010, 17(4): 317-320.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2010/V17/I4/317


航天电连接器加速性能退化试验可行性研究

为解决高可靠长寿命的航天电连接器即使进行加速寿命试验也难以获得失效数据的问题,对电连接器失效模式以及长期贮存下接触性能变化结果进行分析,表明电连接器性能退化存在可能性,并根据长期贮存下试验数据的验证,得出电连接器性能具有退化特性.通过温度加速应力下电连接器接触性能数据的分析,得出其性能退化具有加速性,还具有一定的加速退化规律,这为采用加速性能退化试验对航天电连接器进行可靠性评估提供了依据.

关键词: 电连接器,  性能退化,  可靠性,  加速试验 
[1] Yuchun KUANG,Hui ZHONG,Liangchun ZHONG. Design and research of screw motor with quasi circular-arc contour-pattern[J]. Chinese Journal of Engineering Design, 2023, 30(5): 640-649.
[2] Jianghao LI,Wensheng XIAO,Wentai YU,Hongyan WANG,Shunqing LIU,Youfu SUN. Reliability analysis and allocation research of ultra-deep water pile hammer system[J]. Chinese Journal of Engineering Design, 2023, 30(4): 485-494.
[3] Hongjie GUO,Shuya LIANG,Wenhua CHEN,Liqiang ZHONG,Zhewen CHEN,Jiahui YAN. Research on influence of wire spring inclination angle on storage life of wire spring hole electrical connector[J]. Chinese Journal of Engineering Design, 2023, 30(3): 390-398.
[4] Zheng-feng ZHANG,Xiao-yu SONG,Xiao-lei YUAN,Wen-juan CHEN,Wei-dong ZHANG. Reliability optimization design for crashworthiness of Al/CFRP hybrid thin-walled structure[J]. Chinese Journal of Engineering Design, 2022, 29(6): 720-730.
[5] Jiang LIU,Zheng-ming XIAO,Long-long ZHANG,Wei-biao LIU. Transmission accuracy reliability analysis and parameter optimization of RV reducer considering cycloid gear wear[J]. Chinese Journal of Engineering Design, 2022, 29(6): 739-747.
[6] Jun-xing LI,Yan-ke LI,Kai-cen NIU,Ming QIU,Zhi-hua WANG,Xiao-xu PANG,Li-hai CHEN. Lifetime evaluation of semiconductor laser based on dual-variance stochastic process[J]. Chinese Journal of Engineering Design, 2022, 29(3): 293-299.
[7] LUO Yan-yan, PAN Xiao-song, MA Xuan, WU Xiong-wei. Research on application of infrared thermal imaging technology in plug-in wear detection of electrical connector[J]. Chinese Journal of Engineering Design, 2021, 28(5): 615-624.
[8] CHEN Zhen, LI Tao, XUE Xiao-wei, ZHOU Yang, JING Shuang, CHEN Yan. Fatigue reliability analysis and optimization of vibroseis vibrator baseplate based on fuzzy comprehensive evaluation method[J]. Chinese Journal of Engineering Design, 2021, 28(4): 415-425.
[9] WANG Ai-lun, LIU Le, LIU Qing-ya. Research on strength reliability of pull rod combined rotor based on Kriging surrogate model[J]. Chinese Journal of Engineering Design, 2019, 26(4): 433-440.
[10] CUI Guo-hua, CUI Kang-kang, WU Hai-miao, ZHANG Yan-wei, LIU Jian. Reliability analysis for pressing force of prestressed concrete cylinder pipe port grinding robot[J]. Chinese Journal of Engineering Design, 2018, 25(6): 647-654.
[11] XIE Jing-wei, LI Fang, CHEN Tong, YIN Dong-liang. Analysis of cold standby system reliability model considering use and repair priority[J]. Chinese Journal of Engineering Design, 2018, 25(3): 315-320.
[12] WEN Rui-qiao, YANG Meng-ou, LIU Tao, ZHANG Jun-fu. Time-dependent kinematic reliability analysis of robot manipulators[J]. Chinese Journal of Engineering Design, 2018, 25(1): 50-55.
[13] LUO Yan-yan, WU Xiong-wei, TIAN Ya-chao, YU Chang-chao. Study on the contact performance of electric connector under impact environment[J]. Chinese Journal of Engineering Design, 2018, 25(1): 110-117.
[14] LU Feng-yi, ZHAO Ke-yuan, XU Ge-ning, QI Qi-song. Reliability assessment of small sample based on multiple source information fusion and fuzzy fault tree[J]. Chinese Journal of Engineering Design, 2017, 24(6): 609-617.
[15] ZHANG Gen-bao, XU Fu-wei, RAN Yan, ZHANG Xiao-gang. Research on similarity evaluation and reliability prediction of mechanical structure[J]. Chinese Journal of Engineering Design, 2017, 24(3): 264-272.