Please wait a minute...
工程设计学报  2021, Vol. 28 Issue (1): 72-79    DOI: 10.3785/j.issn.1006-754X.2021.00.004
优化设计     
机械式自动垂直钻具上盘阀开口角度的优化分析
张龙1,2, 张凯1,2, 柴麟1,2, 李国民1,2, 周琴1,2, 刘宝林1,2, 李然然1,2
1.中国地质大学(北京) 工程技术学院, 北京 100083
2.自然资源部深部地质钻探技术重点实验室, 北京 100083
Optimization analysis of opening angle of upper disc valve of mechanical automatic vertical drilling tool
ZHANG Long1,2, ZHANG Kai1,2, CHAI Lin1,2, LI Guo-min1,2, ZHOU Qin1,2, LIU Bao-lin1,2, LI Ran-ran1,2
1.College of Engineering and Technology, China University of Geosciences (Beijing), Beijing 100083, China
2.Key Laboratory of Deep Geological Drilling Technology, Ministry of Natural Resources, Beijing 100083, China
 全文: PDF(1737 KB)   HTML
摘要:

动态机械式自动垂直钻具广泛应用于直井作业中,改善其纠斜性能是优化钻具的关键目标。钻具稳定平台中上盘阀的开口角度对其纠斜性能影响很大。以扩径力冲量、导向力冲量、导向力突变幅度和波动幅值作为钻具井眼螺旋程度、有效推靠力作用和导向力稳定性的评价指标,来评价不同上盘阀开口角度下钻具的纠斜性能。通过分析钻具在纠斜过程中的状态,得到巴掌推靠合力的变化规律,并与试验测试值进行对比,最终得到在不同上盘阀开口角度下3种评价指标的变化规律。研究结果表明:推靠合力的理论值与测试值接近;在上盘阀开口角度为180°时,纠斜过程平稳,纠斜效率高,且能最大程度地降低井眼的螺旋程度。3种钻具纠斜性能评价指标的提出及研究结果为后续垂直钻具的整体优化设计提供了新思路。

关键词: 机械式自动垂直钻具盘阀纠斜优化    
Abstract:

Dynamic mechanical automatic vertical drilling tool is widely used in vertical well operations. Improving its restoring performance is the key goal of optimizing drilling tool. The opening angle of upper disc valve in the stable platform has a great influence on the restoring performance. In view of this, three indexes of expansion force impulse, guiding force impulse, abrupt transition amplitude and fluctuation amplitude of guiding force were set up to evaluate the degree of borehole helix, effective push force and stability of guiding force, and to evaluate the restoring performance of drilling tool at different opening angles of upper disc valve. By analyzing the state of the drilling tool in the restoring process, the changing rule of the resultant force of outstretched hands was obtained, and compared with the test value. Finally, the changing rule of the three indexes at different opening angles of upper disc valve was obtained. The results showed that the theoretical value of the resultant push force was close to the test value. When the opening angle of upper disc valve was 180°, the restoring process was stable and efficient, and the degree of borehole helix could be reduced to the maximum extent. Three proposed evaluation indexes and the research results provide a new idea for the following overall optimization design of the vertical drilling tool.

Key words: mechanical automatic vertical drilling tool    disc valve    restoring    optimization
收稿日期: 2020-07-09 出版日期: 2021-02-25
CLC:  TE 921  
基金资助:

国家重点研发计划资助项目(2018YFC0603405);国家重点研发计划战略性国际科技创新合作重点专项(2016YFE0202200)

通讯作者: 张 凯(1989—),男,山东菏泽人,实验师,博士,从事岩石破碎机理、碎岩工具及超硬材料在地质工程中的应用等研究,E-mail:zhangkai66@cugb.edu.cn     E-mail: zhangkai66@cugb.edu.cn
作者简介: 张 龙(1996—),男,北京人,硕士生,从事地质工程垂直钻井研究,E-mail:2281933143@qq.com,https://orcid.org/0000-0003-0804-1416;
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
张龙
张凯
柴麟
李国民
周琴
刘宝林
李然然

引用本文:

张龙, 张凯, 柴麟, 李国民, 周琴, 刘宝林, 李然然. 机械式自动垂直钻具上盘阀开口角度的优化分析[J]. 工程设计学报, 2021, 28(1): 72-79.

ZHANG Long, ZHANG Kai, CHAI Lin, LI Guo-min, ZHOU Qin, LIU Bao-lin, LI Ran-ran. Optimization analysis of opening angle of upper disc valve of mechanical automatic vertical drilling tool. Chinese Journal of Engineering Design, 2021, 28(1): 72-79.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2021.00.004        https://www.zjujournals.com/gcsjxb/CN/Y2021/V28/I1/72

[1] 王景良,朱天成,朱龙彪,许飞云. 连续体结构的变密度拓扑优化方法研究[J]. 工程设计学报, 2022, 29(3): 279-285.
[2] 孙光明,王奕苗,万仟,弓堃,汪文津,赵坚. 考虑装配变形的精密机床床身优化设计[J]. 工程设计学报, 2022, 29(3): 318-326.
[3] 张春燕,丁兵,何志强,杨杰. 转盘式多足仿生机器人的运动学分析及优化[J]. 工程设计学报, 2022, 29(3): 327-338.
[4] 刘洪江,胡腾,何勇,董峰,罗为. 基于CSO-SVM的数控机床主轴热误差建模[J]. 工程设计学报, 2022, 29(3): 339-346.
[5] 李琴,贾英崎,黄玉峰,李刚,叶闯. 一种工业机器人多目标轨迹优化算法[J]. 工程设计学报, 2022, 29(2): 187-195.
[6] 辛传龙,郑荣,任福琳,梁洪光. AUV接驳装置悬浮平衡分析与配重优化设计[J]. 工程设计学报, 2022, 29(2): 176-186.
[7] 肖圳, 何彦, 李育锋, 吴鹏程, 刘德高, 杜江. 改进MDSMOTEPSO-SVM在汽车组合仪表分类预测中的应用[J]. 工程设计学报, 2022, 29(1): 20-27.
[8] 梁栋, 梁正宇, 畅博彦, 齐杨, 徐振宇. 多臂机提综臂辅助旋铆并联机器人优化设计[J]. 工程设计学报, 2022, 29(1): 28-40.
[9] 钟道方, 田颖, 张明路. 轮腿式爬壁机器人的永磁吸附装置设计与优化[J]. 工程设计学报, 2022, 29(1): 41-50.
[10] 杨世香, 李文强. 焚烧灰处理装备密封结构的创新设计[J]. 工程设计学报, 2021, 28(6): 679-686.
[11] 倪维宇, 张横, 姚胜卫. 基于多工况的汽车座椅骨架轻量化设计[J]. 工程设计学报, 2021, 28(6): 729-736.
[12] 李然然, 张凯, 柴麟, 张龙, 刘宝林, 李国民. 黏滑振动下机械式自动垂直钻具稳定平台的控制性能研究[J]. 工程设计学报, 2021, 28(6): 746-757.
[13] 赵波, 赵海鸣, 刘晨, 胡刚. 悬立式深海钴结壳采矿头的参数化设计与优化[J]. 工程设计学报, 2021, 28(5): 559-568.
[14] 陈振, 李涛, 薛晓伟, 周阳, 敬爽, 陈言. 基于模糊综合评价法的可控震源振动器平板疲劳可靠性分析与优化[J]. 工程设计学报, 2021, 28(4): 415-425.
[15] 高翔, 王林军, 杜义贤, 李响, 徐柳. 基于云模型人工鱼群算法的模糊优化设计[J]. 工程设计学报, 2021, 28(4): 433-442.