Please wait a minute...
工程设计学报
工程设计学报  2019, Vol. 26 Issue (3): 274-279    DOI: 10.3785/j.issn.1006-754X.2019.03.005
优化设计     
某高轨星载数传天线的振动分析
宋建虎
中国电子科技集团有限公司 第五十四研究所， 河北 石家庄 050081
Vibration analysis of a data transmission antenna on high orbit satellite
SONG Jian-hu
The 54th Research Institute of China Electronics Technology Group Corporation, Shijiazhuang 050081, China
 全文: PDF(2256 KB)   HTML
摘要：

为了确保天线系统在发射阶段和入轨工作阶段的安全，对研制的某月球轨道小型星载数传天线进行了振动分析。通过有限元建模仿真方法对该高轨星载天线在发射阶段和入轨工作阶段的振动性能进行了分析和计算，并以此为根据对天线系统结构进行优化设计。进而，通过振动试验对天线系统进行了真实振动环境条件下的测试，结果表明天线系统结构安全。振动试验后对天线电气性能进行了复测，测试结果表明其电气性能稳定，由此验证了天线系统的可靠性和有限元分析的可信性。目前，该数传天线已随星发射并入轨运行，其各项性能指标稳定，工作状态良好。研究结果对提高相关星载天线的振动安全性具有一定的参考作用。
关键词： 数传天线;  月球轨道;  有限元分析;  振动试验    
Abstract:

In order to ensure the safety of antenna system at launch moment and orbit stage, the vibration property of a data transmission antenna developed to work on lunar orbit satellite was analysed. Through the finite element modeling and simulation method，the vibration performance of the antenna on high orbit satellite at launch moment and orbit stage was analysed and calculated， and the system antenna structure was optimized according to the simulation results. The vibration test for antenna system was applied in actual vibration environment, and the results indicated that the antenna system structure was reliable. The electrical property was tested again after vibration test, and the result indicated that the antenna electrical property was stable. The result of vibration test confirmed the reliability of the antenna and the credibility of the finite element analysis. This antenna has been launched and worked on orbit with stable performance indexes and good work conditions. This study can prefer some reference to increase the vibration safety for the related satellite antenna.
Key words: data transmission antenna    lunar orbit    finite element analysis    vibration test
收稿日期: 2018-09-26 出版日期: 2019-06-28
CLC:  TH 113.1  
作者简介: 宋建虎(1986—)，男，河北定州人，工程师，硕士，从事卫星通信天线结构设计研究，E-mail:276858388@qq.com，https://orcid.org/0000-0001-8387-718X
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
宋建虎

引用本文:

宋建虎. 某高轨星载数传天线的振动分析[J]. 工程设计学报, 2019, 26(3): 274-279.

SONG Jian-hu. Vibration analysis of a data transmission antenna on high orbit satellite. Chinese Journal of Engineering Design, 2019, 26(3): 274-279.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2019.03.005    或    https://www.zjujournals.com/gcsjxb/CN/Y2019/V26/I3/274

1 ZENGBin. Structure design of spacecraft electronic equipment[J]. Electro-Mechanical Engineering, 2008, 24(5): 5-7.
2 ZENGPan. Finite element analysis and applications[M]. Beijing: Tsinghua University Press, 2004: 1-492.
3 WANGMin, WANGXiao-jing. Simulation analysis in random vibration of missile-borne antenna[J]. Guidance & Fuze, 2007, 28(2): 57-60.
4 WANGDan-dan, WANGYong, ZHENGXue-xiao, et al. Research on the equivalent calculation method for the effect of random vibration on the gain of slotted waveguide array antenna[J]. Chinese Journal of Engineering Design, 2017, 24(4): 365-372.
5 LINChang-lu, NIEZai-ping. Antenna engineering manual[M]. Beijing: Publishing House of Electronics Industry, 2002: 1-1252.
6 SONGL, DUANB, ZHENGF, et al. Performance of planar slotted waveguide arrays with surface distortion[J]. IEEE Transaction on Antenna & Propagation, 2011, 59(9): 3218-3223. doi:10.1109/tap.2011.2161537
7 ZHUShi-jian. Vibration theory and vibration isolation[M]. Beijing: National Defense Industry Press, 2006: 67-98.
8 HUANGBen-cheng, You-liMA . Space environment test technology of spacecraft[M]. Beijing: National Defense Industry Press, 2002: 1-268.
9 WANGMei-yan, LIChang, HUFeng. Structural design of lightweight radar antenna[J]. Machinery & Electronics, 2018, 36(1): 18-21.
10 DYSKINA V, ESTEINY, KANEL-BELOWA J, et al. A new principle in design of composites materials: reinforcement by interlocked element[J]. Composites Science and Technology, 2003, 63(3/4): 483-491. doi: 10.1016/S0266-3538(02)00228-2
11 HUANGBen-cheng, TONGJing-yu. Space environment engineering[M]. Beijing: China Science and Technology Press, 2010: 1-679.
12 YEYun-shang. Space-vehicle antenna[M]. Beijing: China Science and Technology Press, 2007: 1-1007.
13 LITao, YIZhong, GAOHong. Summarization space environmental worthiness evaluation technology for spacecraft material[J]. Equipment Environmental Engineering, 2012, 9(3): 37-40.
14 Qi-fengLÜ , ZHANGWei-hong, ZHANGQiao, et al. Layout design optimization of component structure with random vibration response[J]. Acta Aeronautica et Astronautica Sinica, 2010, 31(9): 1769-1775.
15 ZHANGXiao-dong, LIJun, XUEMing-de. Thermal and mechanical analysis of composite laminated structures[J]. Journal of Tsinghua University (Science and Technology), 2006, 46(5): 745-748.
16 YUJian-zu. Thermal design and analysis techniques of electronic equipment[M]. Beijing: Beihang University Press, 2000: 25-26.
17 XIANGShu-hong. The test technology of spacecraft mechanics environment[M]. Beijing: China Science and Technology Press, 2010: 1-274.
18 FENGWei-quan. Evaluation and validation of space environmental applicability of spacecraft materials[J]. Spacecraft Environment Engineering, 2010, 27(2): 139-143.
19 HUHong-fen, BAIXiao-hong. Application and development of multi-beam antenna[J]. Modern Radar, 2002, 24(4): 69-75.
[1] 陈洪月, 张站立, 吕掌权. 线性压缩机圆柱臂盘簧的设计及性能研究[J]. 工程设计学报, 2021, 28(4): 504-510.
[2] 王成军, 李帅. 三关节式软体驱动器的设计及其弯曲性能分析[J]. 工程设计学报, 2021, 28(2): 227-234.
[3] 周超, 秦瑞江, 芮晓明. 风载荷作用下V形绝缘子串的力学特性分析[J]. 工程设计学报, 2021, 28(1): 95-104.
[4] 黄伟, 徐建, 陆新征, 胡明祎, 廖文杰. 动力装备和建筑楼盖的动力吸振研究[J]. 工程设计学报, 2021, 28(1): 25-32.
[5] 周超, 王阳, 芮晓明. 500 kV输电线路跳线风偏有限元分析与试验研究[J]. 工程设计学报, 2020, 27(6): 713-719.
[6] 李成兵, 雷鹏. 5 000 m3立式拱顶储罐应力分析与弱顶性能评价[J]. 工程设计学报, 2020, 27(2): 182-190.
[7] 刘召, 由宏新, 孙亮, 杨玉玲, 刘华清. 大型球罐悬吊式液压传动回转检测平台设计[J]. 工程设计学报, 2019, 26(3): 267-273.
[8] 高志来, 邱自学, 任东, 崔德友, 徐新朋. 桥式龙门铣床横梁结构设计与优化[J]. 工程设计学报, 2019, 26(1): 56-64.
[9] 骆燕燕, 武雄伟, 田亚超, 于长潮. 冲击环境下电连接器接触性能研究[J]. 工程设计学报, 2018, 25(1): 110-117.
[10] 张强, 吴泽光, 吴泽洋, 王海舰. 采煤机导向滑靴力学在线测试与分析[J]. 工程设计学报, 2017, 24(6): 694-701,716.
[11] 程明, 陈照波, KIM Kyongsol, 焦映厚. 多级蜿蜒磁路式磁流变阻尼器的设计与分析[J]. 工程设计学报, 2017, 24(3): 350-358.
[12] 刘凡, 秦娜, 牛健地, 郑亮. 旋转超声磨削钛合金有限元仿真与试验研究[J]. 工程设计学报, 2017, 24(2): 162-167.
[13] 骆燕燕, 杨静宇, 刘昕伟, 李晓宁. 电连接器接触件应力场的数值分析与试验验证[J]. 工程设计学报, 2016, 23(6): 564-570.
[14] 刘凯, 曹毅, 周睿, 丁锐, 葛姝翌. 抗压内LET柔性铰链的建模及分析[J]. 工程设计学报, 2016, 23(6): 585-591.
[15] 赵宏强, 周茂贤, 陈庆, 傅斯龙. 潜孔钻机单支腿支撑平台受力分析[J]. 工程设计学报, 2016, 23(4): 345-351,363.