Please wait a minute...
工程设计学报
工程设计学报  2016, Vol. 23 Issue (2): 181-187    DOI: 10.3785/j.issn.1006-754X.2016.02.012
建模、分析、优化和决策     
基于AFSA-SimpleMKL对振动筛建模及筛机优化
李占福, 童昕
华侨大学 机电及自动化学院, 福建 厦门 361021
Modeling and parameter optimization for vibrating screens based on AFSA-SimpleMKL
LI Zhan-fu, TONG Xin
College of Mechanical Engineering and Automation, Huaqiao University, Xiamen 361021, China
 全文: PDF(2265 KB)   HTML
摘要： 针对目前振动筛筛分性能差及筛分理论不完善,亟待建立筛机参数与筛分效率间综合数学模型来指导振动筛的设计.基于离散单元法(Discrete Element Method,DEM)的筛分仿真实验解决筛分过程的复杂性和筛分数据难获得等问题,用可调参数的振动筛对仿真实验进行验证.筛分效率与筛分参数之间的数学关系是一个复杂的非线性问题,由于传统的回归算法对筛分数学模型预测精度低,利用能有效解决小样本问题和基于统计学理论的简单多核支持向量机(Simple Multiple Kernel Learning,SimpleMKL)对仿真实验获得的数据建立回归模型.但其模型是多极值且不可微分的多参数大规模计算问题,借用鲁棒性强和全局收敛性好的人工鱼群优化算法(Artificial Fish Swarm Algorithm,AFSA)对由SimpleMKL建立的筛分回归模型进行参数寻优,得出筛机振动和结构参数:振幅为2.5 mm,振动频率为22 Hz,振动方向角为50°,筛孔大小为0.9 mm,筛丝直径为0.4 mm,筛面倾角为21.6°.提高了振动筛的筛分效率,为振动筛的设计和制造提供了新思路.
关键词： 离散单元法;  简单多核支持向量机;  人工鱼群算法;  参数优化;  建模;  筛分效率    
Abstract: In view of the poor screening efficiency of vibrating screens and the incomplete screening theory, a comprehensive mathematical model is need to be established to guide the design of vibrating screens. Screening simulation experiment based on the Discrete Element Method was applied to solve problems like the complexity of screening process and the difficulty to obtain the screening data, and its validity was verified by an experimental prototype with adjustable parameters. In principle, the mathematical relationship between screening efficiency and parameters was a complex non-linear problem, instead of being limited to low precision as the traditional regression algorithm was, the nonlinear regression model of vibration screen with designing the sample space of operation parameters and screen configurations based on Simple Multiple Kernel Learning was introduced. Considering multi-extremum, large-scale, and non-differentiable of this computational model, the artificial fish-swarm algorithm with strong robustness and global convergence was applied to parameters optimization. Finally, the optimal vibration parameters were as follows: vibration amplitude was 2.5 mm, frequency was 22 Hz, vibration direction angle was 50°, screen panel square hole dimensions was 0.9 mm, wire diameter was 0.45 mm, inclination was 21.6°. In summary, this methodology could be applied to the research of vibrating screen. Additionally, authors of the scheme are confident that the results will be useful to improve the design and manufacture of vibrating screen.
Key words: Discrete Element Method    SimpleMKL    artificial fish-swarm algorithm    parameter optimization    modeling    screening efficiency
收稿日期: 2015-10-27 出版日期: 2016-04-28
CLC:  TH12  
基金资助:

国家自然科学基金资助项目(51175190);福建省科技平台建设项目(2013H2003).
通讯作者: 童昕(1964—),男,教授,博士生导师,博士,从事机械设计等研究,E-mail:ccq@hqu.edu.cn.     E-mail: ccq@hqu.edu.cn
作者简介: 李占福(1987—),男,河北衡水人,博士生,从事计算机辅助设计等研究,E-mail:1300103008@hqu.edu.cn.http://orcid.org//0000-0002-8525-1583
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
李占福
童 昕

引用本文:

李占福, 童昕. 基于AFSA-SimpleMKL对振动筛建模及筛机优化[J]. 工程设计学报, 2016, 23(2): 181-187.

LI Zhan-fu, TONG Xin. Modeling and parameter optimization for vibrating screens based on AFSA-SimpleMKL. Chinese Journal of Engineering Design, 2016, 23(2): 181-187.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2016.02.012    或    https://www.zjujournals.com/gcsjxb/CN/Y2016/V23/I2/181

[1] 刘光焕,童昕,辛成涛.振动筛筛分过程的数值模拟及进展[J].金属矿山,2008(9):104-110. LIU Guang-huan,TONG Xin,XIN Chen-tao.Numerical simulation of vibration screening process and its process[J].Metal Mine,2008(9):104-110.

[2] CLEARY P W,SAWLEY M.DEM modelling of industrial granular flows:3D case studies and the effect of particle shape on hopper discharge[J].Applied Mathematical Modelling,2002,26(2):89-111.

[3] LI J,WEBB C,PANDIELLA S S,et al.Discrete particle motion on sieves:a numerical study using the DEM simulation[J].Powder Technology,2003,133(1/3):190-202.

[4] JIAO H G,MA J,ZHAO Y M.Study on the numerical simulation of batch sieving process[J].Journal of Coal Science & Engineering,2006,12(2):80-83.

[5] CLEARY P W,SINNOTT M D,MORRISON R D.Separation performance of double deck banana screens:part 1:flow and separation for different accelerations[J].Minerals Engineering,2009,22 (14):1218-1229.

[6] CLEARY P W,SINNOTT M D,MORRISON R D.Separation performance of double deck banana screens:part 2:quantitative predictions[J].Minerals Engineering,2009,22 (14):1230-1244.

[7] CHEN Y H,TONG X.Modeling screening efficiency with vibrational parameters based on DEM 3D simulation[J].Mining Science and Technology,2010,20(4):615-620.

[8] CHEN Y H,TONG X.Application of the DEM to screening process:a 3D simulation[J].Mining Science and Technology,2009,19(4):493-497.

[9] 李菊,赵德安,沈惠平,等.基于输入优选的三维并联振动筛输出特性分析[J].中国机械工程,2014,25(14):1852-1857. LI Ju,ZHAO De-an,SHEN Hui-ping,et al.Analysis on output characteristics of three-dimensional parallel kinematics vibrating screen based on input optimization[J].China Mechanical Engineering,2014,25(14):1852-1857.

[10] LI Z F,TONG X.Modeling and parameter optimization for the design of vibrating screens[J].Minerals Engineering,2015,83:149-155.

[11] VAPNIK V.The nature of statistical learning theory[M].New York:Springer,1995:84-90.

[12] VAPNIK V N.An overview of statistical learning theory[J].IEEE Trans Neural Networks,1999,10 (5):988-999.

[13] 李元诚,方廷健,于尔铿.短期负荷预测的支持向量机方法[J].中国电机工程学报,2003,23(6):55-59. LI Yuan-cheng,FANG Ting-jian,YU Er-keng.Study of support vector machines for short-term load forecasting[J].Proceedings of the CSEE,2003,23(6):55-59.

[14] 申中杰,陈雪峰,何正嘉,等.基于相对特征和多变量支持向量机的滚动轴承剩余寿命预测[J].机械工程学报,2013,49(2):183-189. SHEN Zhong-jie,CHEN Xue-feng,HE Zheng-jia,et al.Remaining life predictions of rolling bearing based on relative features and multivariable support vector machine[J].Chinese Journal of Mechanical Engineering,2013,49(2):183-189.

[15] 陆凤仪,王 爽,徐格宁,等.构建起重机载荷谱v-SVRM预测模型的改进方法[J].工程设计学报,2015,22 (5):412-419. LU Feng-yi,WANG Shuang,XU Ge-ning,et al.Improved modeling method for prediction model of crane load spectrum based on support vector regression machine[J].Chinese Journal of Engineering Design,2015,22 (5):412-419.

[16] RAKOTOMAMONJY A,BACH F R,CANU S,et al.SimpleMKL[J].Journal of Machine Learing Reseach,2008,9(11):2491-2521.

[17] 李晓磊,邵之江,钱积新.一种基于动物自治体的寻优模式:鱼群算法[J].系统工程理论与实践,2002,22(11):32-38. LI Xiao-lei,SHAO Zhi-jiang,QIAN Ji-xin.An optimizing method based on autonomous animats:fish-swarm algorithm[J].Systems Engineering—Theory & Practice,2002,22(11):32-38.

[18] CLEARY P W.DEM prediction of industrial and geophysical particle flows[J].Particuology,2010,8(2):106-118.
[1] 赵富强,杜特,常宝玉,牛志刚. 肢腿履带足机构抬腿工况动力学分析与实验研究[J]. 工程设计学报, 2022, 29(4): 474-483.
[2] 李科军,邓旻涯,黄文静,张宇,曾家旺,陈淼林. 混凝土湿喷机摆动系统工作特性研究[J]. 工程设计学报, 2022, 29(4): 519-526.
[3] 张勇德,王青,杨伟峰. 基于关键测量特征的机翼对接容差分配[J]. 工程设计学报, 2022, 29(3): 300-308.
[4] 高伟,张玮,谷海涛,孟令帅,高浩,赵志超. 大型深海AUV无动力螺旋下潜运动特性分析[J]. 工程设计学报, 2022, 29(3): 370-383.
[5] 钟道方, 田颖, 张明路. 轮腿式爬壁机器人的永磁吸附装置设计与优化[J]. 工程设计学报, 2022, 29(1): 41-50.
[6] 来全宝, 陶庆, 胡玉舸, 孟庆丰. 基于人工鱼群算法-极限学习机的多手势精准识别[J]. 工程设计学报, 2021, 28(6): 671-678.
[7] 高翔, 王林军, 杜义贤, 李响, 徐柳. 基于云模型人工鱼群算法的模糊优化设计[J]. 工程设计学报, 2021, 28(4): 433-442.
[8] 崔雅筠, 郭安福, 姜涛, 李俊颉, 李永鑫. 可连续取水的移动应急净水车结构设计与分析[J]. 工程设计学报, 2021, 28(1): 105-111.
[9] 汤亮, 何仁杰, 龚发云, 李飞扬, 刘冠军, 杨敏. 变风载下风电齿轮箱内部激励规律研究及动态特性优化[J]. 工程设计学报, 2020, 27(2): 212-222.
[10] 李传珍, 李国龙, 陶小会, 庞源. 基于改进有序聚类法的立式加工中心进给系统温测点优化[J]. 工程设计学报, 2020, 27(2): 223-231.
[11] 吴文江, 王振兴, 高占凤, 郜建忠, 吕燕军. 集沙铲集沙过程的受力状况仿真分析与试验研究[J]. 工程设计学报, 2019, 26(4): 490-496.
[12] 刘春青, 王文汉. 基于人工神经网络-遗传算法的展成法球面精密磨削参数优化[J]. 工程设计学报, 2019, 26(4): 395-402.
[13] 魏春雨, 蔡月, 刘明贺, 张琦, 贾乾忠. 新型车载医疗救护隔振平台设计及仿真[J]. 工程设计学报, 2018, 25(5): 532-538.
[14] 李彦奎, 吕彦明, 倪明明. 基于正交试验的航空叶片精锻模具磨损分析[J]. 工程设计学报, 2017, 24(6): 632-637.
[15] 邓海顺, 黄坤, 黄然, 王传礼, 邓月飞. 平衡式两排轴向柱塞泵斜盘力矩特性建模与分析[J]. 工程设计学报, 2016, 23(6): 592-599.