机械工程 |
|
|
|
|
双螺旋锥形混合器叶片结构对颗粒混合的影响 |
蔡瑞环( ),赵永志*( ) |
浙江大学 能源工程学院 化工机械研究所,浙江 杭州 310027 |
|
Effect of screw structure on granular mixing in a double-screw conical mixer |
Rui-huan CAI( ),Yong-zhi ZHAO*( ) |
Institute of Process Equipment, College of Energy Engineering, Zhejiang University, Hangzhou 310027, China |
1 |
NOROUZI H, ZARGHAMI R, MOSTOUFI N Insights into the granular flow in rotating drums[J]. Chemical Engineering Research and Design, 2015, 102: 12- 25
doi: 10.1016/j.cherd.2015.06.010
|
2 |
YAMAMOTO M, ISHIHARA S, KANO J Evaluation of particle density effect for mixing behavior in a rotating drum mixer by DEM simulation[J]. Advanced Powder Technology, 2016, 27 (3): 864- 870
doi: 10.1016/j.apt.2015.12.013
|
3 |
赵永志, 程易 水平滚筒内二元颗粒体系径向分离模式的数值模拟研究[J]. 物理学报, 2008, 57 (1): 322- 328 ZHAO Yong-zhi, CHENG Yi Numerical simulation of radial segregation patterns of binary granular systems in a rotating horizontal drum[J]. Acta Physica Sinica, 2008, 57 (1): 322- 328
doi: 10.3321/j.issn:1000-3290.2008.01.052
|
4 |
CHANDRATILLEKE G, YU A, STEWART R, et al Effects of blade rake angle and gap on particle mixing in a cylindrical mixer[J]. Powder Technology, 2009, 193 (3): 303- 311
doi: 10.1016/j.powtec.2009.03.007
|
5 |
ALIAN M, EIN-MOZAFFARI F, UPRETI S Analysis of the mixing of solid particles in a plowshare mixer via discrete element method (DEM)[J]. Powder Technology, 2015, 274: 77- 87
doi: 10.1016/j.powtec.2015.01.012
|
6 |
SAKAI M, SHIGETO Y, BASINSKAS G, et al Discrete element simulation for the evaluation of solid mixing in an industrial blender[J]. Chemical Engineering Journal, 2015, 279: 821- 839
doi: 10.1016/j.cej.2015.04.130
|
7 |
LIU P, YANG R, YU A DEM study of the transverse mixing of wet particles in rotating drums[J]. Chemical Engineering Science, 2013, 86: 99- 107
doi: 10.1016/j.ces.2012.06.015
|
8 |
BRONE D, ALEXANDER A, MUZZIO F Quantitative characterization of mixing of dry powders in V-blenders[J]. AICHE Journal, 1998, 44 (2): 271- 278
doi: 10.1002/aic.690440206
|
9 |
KUO H, KNIGHT P, PARKER D, et al The influence of DEM simulation parameters on the particle behaviour in a V-mixer[J]. Chemical Engineering Science, 2002, 57 (17): 3621- 3638
doi: 10.1016/S0009-2509(02)00086-6
|
10 |
MOLAEI E A, YU A B, ZHOU Z Y Particle scale modelling of mixing of ellipsoids and spheres in gas-fluidized beds by a modified drag correlation[J]. Powder Technology, 2019, 343: 619- 628
doi: 10.1016/j.powtec.2018.11.054
|
11 |
张勇, 金保升, 钟文琪 喷动气固流化床颗粒混合规律的实验研究[J]. 中国电机工程学报, 2008, 28 (20): 8- 12 ZHANG Yong, JIN Bao-sheng, ZHONG Wen-qi Experimental investigation on particle mixing in spout-fluid bed[J]. Proceedings of the CSEE, 2008, 28 (20): 8- 12
doi: 10.3321/j.issn:0258-8013.2008.20.002
|
12 |
马华庆, 赵永志 喷动流化床中杆状颗粒混合特性的CFD-DEM模拟[J]. 浙江大学学报: 工学版, 2020, 54 (7): 1347- 1354 MA Hua-qing, ZHAO Yong-zhi CFD-DEM investigation on mixing of rod-like particles in spout-fluid bed[J]. Journal of Zhejiang University: Engineering Science, 2020, 54 (7): 1347- 1354
|
13 |
BERGH W, SCARLETT B, KOLAR Z. Computer simulation model of a nauta mixer [J]. Powder Technology, 1993, 77(1): 19-30.
|
14 |
BERNTSSON O, DANIELSSON L, LAGERHOLM B, et al Quantitative in-line monitoring of powder blending by near infrared reflection spectroscopy[J]. Powder Technology, 2002, 123 (2/3): 185- 193
|
15 |
GOLSHAN S, ZARGHAMI R, NOROUZI H N, et al Granular mixing in nauta blenders[J]. Powder Technology, 2017, 305: 279- 288
doi: 10.1016/j.powtec.2016.09.059
|
16 |
BEDNAREK X, MARTIN S, NDIAYE A, et al Extrapolation of DEM simulations to large time scale. application to the mixing of powder in a conical screw mixer[J]. Chemical Engineering Science, 2019, 197: 223- 234
doi: 10.1016/j.ces.2018.12.022
|
17 |
王凯, 虞军. 化工设备设计全书: 搅拌设备[M]. 北京: 化学工业出版社, 2003.
|
18 |
QI F, HEINDEL T, WRIGHT M Numerical study of particle mixing in a lab-scale screw mixer using the discrete element method[J]. Powder Technology, 2017, 308: 334- 345
doi: 10.1016/j.powtec.2016.12.043
|
19 |
BAO Y, LI T, WANG D, et al Discrete element method study of effects of the impeller configuration and operating conditions on particle mixing in a cylindrical mixer[J]. Particuology, 2020, 49: 146- 158
doi: 10.1016/j.partic.2019.02.002
|
20 |
BAO Y, LU Y, CAI Z, et al Effects of rotational speed and fill level on particle mixing in a stirred tank with different impellers[J]. Chinese Journal of Chemical Engineering, 2018, 26 (6): 1383- 1391
doi: 10.1016/j.cjche.2017.11.010
|
21 |
OSORIO J, MUZZIO F Effects of processing parameters and blade patterns on continuous pharmaceutical powder mixing[J]. Chemical Engineering and Processing, 2016, 109: 59- 67
doi: 10.1016/j.cep.2016.07.012
|
22 |
CAI R, HOU Z, ZHAO Y Numerical study on particle mixing in a double-screw conical mixer[J]. Powder Technology, 2019, 352: 193- 208
doi: 10.1016/j.powtec.2019.04.065
|
23 |
CAI R, ZHAO Y An experimentally validated coarse-grain DEM study of monodisperse granular mixing[J]. Powder Technology, 2020, 361: 99- 111
doi: 10.1016/j.powtec.2019.10.023
|
24 |
CUNDALL P A, STRACK O D A discrete numerical model for granular assemblies[J]. Geotechnique, 1979, 29 (1): 47- 65
doi: 10.1680/geot.1979.29.1.47
|
25 |
TING J M, CORKUM B T Computational laboratory for discrete element geomechanics[J]. Journal of Computing in Civil Engineering, 1992, 6 (2): 129- 146
doi: 10.1061/(ASCE)0887-3801(1992)6:2(129)
|
26 |
LACEY P M C Developments in the theory of particle mixing[J]. Journal of Applied Chemistry, 1954, 4 (5): 257- 268
|
27 |
XU L, LUO K, ZHAO Y Numerical prediction of wear in SAG mills based on DEM simulations[J]. Powder Technology, 2018, 329: 353- 363
doi: 10.1016/j.powtec.2018.02.004
|
28 |
许磊, 罗坤, 赵永志, 等. 物料粒径对半自磨机衬板磨损的影响[J]. 浙江大学学报: 工学版, 2019, 53 (12): 2255- 2263 XU Lei, LUO Kun, ZHAO Yong-zhi, et al Effect of particle size on liner wear in semi-autogenous mill[J]. Journal of Zhejiang University: Engineering Science, 2019, 53 (12): 2255- 2263
doi: 10.3785/j.issn.1008-973X.2019.12.001
|
29 |
FINNIE I Erosion of surfaces by solid particles[J]. Wear, 1960, 3 (2): 87- 103
doi: 10.1016/0043-1648(60)90055-7
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|