Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
自动化技术、控制技术     
基于凹凸变换与圆周拟合的重叠气泡轮廓重构
穆晶晶, 赵昕玥, 何再兴, 张树有
浙江大学 流体动力与机电系统国家重点实验室,浙江 杭州 310027
Contour reconstruction of overlapped bubbles based on concave-convex transformation and circle fitting
MU Jing-jing, ZHAO Xin-yue, HE Zai-xing, ZHANG Shu-you
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
 全文: PDF(3520 KB)   HTML
摘要：

针对识别气液两相流的气泡过程中气相比例较大气泡易发生重叠的问题,提出基于曲线凹凸性变换与圆周拟合的重叠气泡分割与轮廓重构算法.对气泡图像进行预处理,利用高斯滤波滤除噪声干扰,依据自适应阈值分离出前景,得到预分割图像.利用Canny算法提取轮廓,利用高斯函数平滑曲线,计算轮廓上的点到质心的距离.对得到的距离曲线进行凹凸性变换特性分析,对每两个凹点进行分割路径选取.利用最小二乘圆周拟合插值算法对重叠部分的气泡轮廓进行重构,得到气泡分割后的重构图像.实验结果表明,该算法是一种有效的分割与重构重叠气泡的算法,具有较好的分割和重构性能.
Abstract:

A method for segmentation of overlapped bubbles segmentation and contour reconstruction was proposed based on the curve concave-convex transformation and circle fitting in order to identify overlapped bubbles of gas-liquid two-phase flow when the gas phase ratio is large. The bubble image was pre-processed, including the noise that was filtered by the Gauss filter, and the foreground that was separated according to the adaptive threshold. The pre-segmented image was obtained. Then the contour was extracted by the Canny algorithm. The curve was smoothed by the Gaussian function. The distance between contour points and the centroid was calculated. The curve was analyzed by concave-convex transformation characteristic. The segmentation path was selected on each of the two concave points. The bubble contour was reconstructed by the least square circle fitting interpolation algorithm, and the bubble segmentation and reconstruction image was obtained. Experimental results show that the proposed algorithm is an effective algorithm for the segmentation and reconstruction of overlapped bubbles, which has high performance.
出版日期: 2017-04-25
CLC:  TP 391  
基金资助:

国家自然科学基金资助项目(51405435,51405434)；浙江省公益性技术应用研究计划资助项目(2016C31035)；浙江省自然科学基金资助项目(LY17F030011).
通讯作者: 赵昕玥,女,副教授. ORCID: 0000-0002-7184-0985.     E-mail: zhaoxinyue@zju.edu.cn
作者简介: 穆晶晶(1993—),女,硕士生,从事机器视觉、产品数字化设计的研究. ORCID: 0000-0002-6539-9871. E-mail: mujingjing1993@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

穆晶晶, 赵昕玥, 何再兴, 张树有. 基于凹凸变换与圆周拟合的重叠气泡轮廓重构[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2017.04.011.

MU Jing-jing, ZHAO Xin-yue, HE Zai-xing, ZHANG Shu-you. Contour reconstruction of overlapped bubbles based on concave-convex transformation and circle fitting. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2017.04.011.

［1］ LIAO M, ZHAO Y Q, LI X H, et al. Automatic segmentation for cell images based on bottleneck detection and ellipse fitting ［J］. Neurocomputing, 2015, 173(3): 615-622.
［2］ 王丹丹,徐越,宋怀波,等.融合K-means与Ncut算法的无遮挡双重叠苹果目标分割与重建［J］.农业工程学报, 2015，31(10): 227-234.
WANG Dan-dan, XU Yue, SONG Huai-bo, et al. Fusion of K-means and Ncut algorithm to realize segmentation and reconstruction of two overlapped apples without blocking by branches and leaves ［J］. Transactions of the Chinese Society of Agricultural Engineering, 2015,31(10): 227-234.
［3］ 王乐乐,雍晓东,李然,等.图像处理技术在气泡特性研究中的应用［J］.四川大学学报：工程科学版,2012,44(增2): 188-192.
WANG Le-le,YONG Xiao-dong,LI Ran,et al. Image processing technology in the application of bubble characteristics research ［J］. Journal of Sichuan University: Engineering Science Edition, 2012, 44(supple.2):188-192.
［4］ LIU L M, YANG N, LAN J H, et al. Image segmentation based on gray stretch and threshold algorithm ［J］. Optik-International Journal for Light and Electron Optics, 2015, 126(6): 626-629.
［5］ LONG J W, SHEN X J, CHEN H P. Adaptive minimum error thresholding algorithm ［J］. Acta Automatica Sinica, 2012, 38(7): 1134.
［6］ 胡敏,蔡慧芬.基于形态学标记连通的分水岭图像分割［J］.电子测量与仪器学报,2011,25(10): 864-869.
HU Min,CAI Hui-fen. Watershed segmentation based on morphological marker-connection ［J］. Journal ofElectronic Measurement and Instrument, 2011, 25(10): 864-869.
［7］ 刘荣,彭艳敏,唐粲,等.基于分水岭与图割的自动分割方法［J］.北京航空航天大学学报,2012, 38(5):636-641.
LIU Rong,PENG Yan-min,TANG Can,et al. Object auto-segmentation based on watershed and graph cut ［J］. Journal of Beijing University of Aeronautics and Astronautics, 2012, 38(5): 636-641.
［8］ 徐越,李盈慧,宋怀波,等.基于Snake模型与角点检测的双果重叠苹果目标分割方法［J］.农业工程学报,2015,31(1): 196-203.
XU Yue, LI Ying-hui, SONG Huai-bo, et al. Segmentation method of overlapped double apples based on Snake model and corner detectors［J］. Transactions of the Chinese Society of Agricultural Engineering, 2015,31(1): 196-203.
［9］ CARMONA-POYATO A, MADRID-CUEVAS F J, MEDINA-CARNICER R, et al. Polygonal approximation of digital planar curves through break point suppression ［J］. Pattern Recognition, 2010, 43(1):14-25.
［10］ 陈恺, 陈芳, 戴敏, 等. 基于萤火虫算法的二维熵多阈值快速图像分割［J］. 光学精密工程, 2014, 22(2): 517-523.
CHEN Kai,CHEN Fang,DAI Min,et al. Fast image segmentation with multilevel threshold of two dimensional entropy based on firefly algorithm ［J］. Optics and Precision Engineering, 2014, 22(2): 517-523.
［11］ 杨家红, 刘杰, 钟坚成,等. 结合分水岭与自动种子区域生长的彩色图像分割算法［J］. 中国图象图形学报, 2010, 15(1): 63-68.
YANG Jia-hong, LIU Jie, ZHONG Jian-cheng,et al. A color image segmentation algorithm by integrating watershed with automatic seeded region growing ［J］. Journal of Image and Graphics, 2010, 15(1): 63-68.
［12］ KONUR U, GÜRGEN F S, VAROL F, et al. Computer aided detection of spina bifida using nearest neighbor classification with curvature scale space features of fetal skulls extracted from ultrasound images ［J］. Knowledge-Based Systems, 2015, 85(C): 80-95.
［13］ BORRELLI V, ORGERET R. Error term in pointwise approximation of the curvature of a curve ［J］. Computer Aided Geometric Design, 2010, 27(7): 538-550.
［14］ CHEN S T, MENG H, ZHANG C, et al. A KD curvature based corner detector ［J］. Neurocomputing, 2016, 173(2): 434-441.
［15］ 韦冬冬,赵豫红.基于凹点匹配的重叠图像分割算法［J］.计算机与应用化学,2010, 27(1): 99-102.
WEI Dong-dong,ZHAO Yu-hong. An image segment algorithm for overlapped particles based on concave points matching ［J］. Computers and Applied Chemistry, 2010, 27(1): 99-102.
［16］ WANG W X. Binary image segmentation of aggregates based on polygonal approximation and classification of concavities ［J］. Pattern recognition, 1998, 31(10): 1503-1524.
［17］ 俞龙江,杨英,孙圣和.基于最小二乘拟合法的焊点形状检测［J］.仪器仪表学报, 2007, 7(28): 1255-1258.
YU Long-jiang, YANG Ying, SUN Sheng-he. Solder joint shape inspection using least square fitting ［J］. Chinese Journal of Scientific Instrument, 2007, 7(28): 1255-1258.
[1] 郑守国,张勇德,谢文添,樊虎,王青. 基于数字孪生的飞机总装生产线建模[J]. 浙江大学学报(工学版), 2021, 55(5): 843-854.
[2] 张师林,马思明,顾子谦. 基于大边距度量学习的车辆再识别方法[J]. 浙江大学学报(工学版), 2021, 55(5): 948-956.
[3] 宋鹏,杨德东,李畅,郭畅. 整体特征通道识别的自适应孪生网络跟踪算法[J]. 浙江大学学报(工学版), 2021, 55(5): 966-975.
[4] 蔡君,赵罡,于勇,鲍强伟,戴晟. 基于点云和设计模型的仿真模型快速重构方法[J]. 浙江大学学报(工学版), 2021, 55(5): 905-916.
[5] 王虹力,郭斌,刘思聪,刘佳琪,仵允港,於志文. 边端融合的终端情境自适应深度感知模型[J]. 浙江大学学报(工学版), 2021, 55(4): 626-638.
[6] 张腾,蒋鑫龙,陈益强,陈前,米涛免,陈彪. 基于腕部姿态的帕金森病用药后开-关期检测[J]. 浙江大学学报(工学版), 2021, 55(4): 639-647.
[7] 郑英杰,吴松荣,韦若禹,涂振威,廖进,刘东. 基于目标图像FCM算法的地铁定位点匹配及误报排除方法[J]. 浙江大学学报(工学版), 2021, 55(3): 586-593.
[8] 雍子叶,郭继昌,李重仪. 融入注意力机制的弱监督水下图像增强算法[J]. 浙江大学学报(工学版), 2021, 55(3): 555-562.
[9] 于勇,薛静远,戴晟,鲍强伟,赵罡. 机加零件质量预测与工艺参数优化方法[J]. 浙江大学学报(工学版), 2021, 55(3): 441-447.
[10] 胡惠雅,盖绍彦,达飞鹏. 基于生成对抗网络的偏转人脸转正[J]. 浙江大学学报(工学版), 2021, 55(1): 116-123.
[11] 陈杨波,伊国栋,张树有. 基于点云特征对比的曲面翘曲变形检测方法[J]. 浙江大学学报(工学版), 2021, 55(1): 81-88.
[12] 段有康,陈小刚,桂剑,马斌,李顺芬,宋志棠. 基于相位划分的下肢连续运动预测[J]. 浙江大学学报(工学版), 2021, 55(1): 89-95.
[13] 张太恒,梅标,乔磊,杨浩杰,朱伟东. 纹理边界引导的复合材料圆孔检测方法[J]. 浙江大学学报(工学版), 2020, 54(12): 2294-2300.
[14] 梁栋,刘昕宇,潘家兴,孙涵,周文俊,金子俊一. 动态背景下基于自更新像素共现的前景分割[J]. 浙江大学学报(工学版), 2020, 54(12): 2405-2413.
[15] 晋耀,张为. 采用Anchor-Free网络结构的实时火灾检测算法[J]. 浙江大学学报(工学版), 2020, 54(12): 2430-2436.