[1] LABORDE R, CHANTREL P, MORY M. Tip clearance and tip vortex cavitation in an axial flow pump [J]. Journal of Fluids Engineering, 1997, 119(3): 680685.
[2] RAINS D A. Tip clearance flows in axial compressors and pumps [D]. California: California Institute of Technology, 19-54.
[3] 杨昌明,陈次昌,王金诺,等.轴流泵端壁间隙流动特性的数值研究[J].机械工程学报,2003, 39(9): 49-51.
YANG Changming, CHEN Cichang, WANG Jinnuo, et al. Numerical study for behavior of tip clearance flow in axialflow pump [J]. Chinese Journal of mechanical Engineering, 2003, 39(9): 49-51.
[4] 戴辰辰,郭鹏程,罗兴锜.轴流泵端壁间隙流动特性的数值分析[J].流体机械,2009, 37(6): 32-35.
DAI Chenchen, GUO Pengcheng, LUO Xingqi. Numerical analysis of tip leakage flow characteristic in axial flow pump [J]. Fluid Machinery, 2009, 37(6): 32-35.
[5] YOU D, WANG M, MOIN P, et al. Study of tipclearance flow in turbomachines using largeeddy simulation [J]. Computing In Science & Engineering, 2004, 6(6): 38-46.
[6] 黎耀军,沈金峰,严海军,等.叶顶间隙对轴流泵轮缘泄漏流动影响的大涡模拟[J].水利学报, 2014, 45(2): 235-242.
LI Yaojun, SHEN Jinfeng, YAN Haijun, et al. Investigation of the effects of tipgap size on the tipleakage flow in an axialflow pump using LES [J]. Journal of Hydraulic Engineering, 2014, 45(2): 235-242.
[7] 黎耀军,沈金峰,刘竹青,等.轴流泵轮缘间隙非定常流动的大涡模拟[J].农业机械学报, 2013, 44(S1): 113-118.
LI Yaojun, SHEN Jinfeng, LIU Zhuqing, et al. Large eddy simulation of unsteady flow in tip region of axialflow pump [J]. Transactions of the Chinese Society for Agricultural Machinery, 2013, 44(S1): 113-118.
[8] 李忠,杨敏官,姬凯,等.轴流泵叶顶间隙空化流可视化实验研究[J].工程热物理学报,2011, 32(8): 1315-1318.
LI Zhong, YANG Minguan, JI Kai, et al. Visualization research on cavitation flow in tip clearance of axialflow pump [J]. Journal of Engineering Thermophysics, 2011, 32(8): 1315-1318.
[9] 张德胜,陈健,施卫东,等.轴流泵叶顶泄漏涡空化的数值模拟与可视化实验研究[J].工程力学, 2014, 31(9): 225-231.
ZHANG Desheng, CHEN Jian, SHI Weidong, et al. Numerical simulation and visualization study on tip leakage vortex cavitation in an axialflow pump [J]. Engineering Mechanics, 2014, 31(9): 225-231.
[10] 张德胜,石磊,施卫东,等.轴流泵叶轮叶顶区空化流的数值模拟与实验研究[J].水利学报,2014, 45(3): 335-342.
ZHANG Desheng, SHI Lei, SHI Weidong, et al. Numerical simulation and experimental study on impeller tip region cavitation in axial flow pump [J]. Journal of Hydraulic Engineering, 2014, 45(3): 335-342.
[11] TABAR M T S, POURSHARIFI Z. An experimental study of tip vortex cavitation inception in an axial flow pump [J]. World Academy of Science, Engineering and Technology, 2011, 73(1): 527-530.
[12] WU H, TAN D, MIORINI R L, et al. Threedimensional flow structures and associated turbulence in the tip region of a waterjet pump rotor blade [J]. Experiments in fluids, 2011, 51(6): 1721-1737.
[13] WU H, SORANNA F, MICHAEL T, et al. Cavitation in the tip region of the rotor blades within a waterjet pump [C]∥ASME 2008 Fluids Engineering Division Summer Meeting collocated with the Heat Transfer, Energy Sustainability, and 3rd Energy Nanotechnology Conferences. Jacksonville, Florida, USA: American Society of Mechanical Engineers, 2008: 193-202.
[14] DREYER M, DECAIX J. Mind the gap: a new insight into the tip leakage vortex using stereoPIV[J]. Experiments in Fluids, 2014, 55(11): 113.
[15] CHANG N A, YAKUSHIJI R, DOWLING D R, et al. Cavitation visualization of vorticity bridging during the merger of corotating line vortices [J]. Physics of Fluids (1994present), 2007, 19(5): 058-106.
[16] ZHANG Desheng, SHI Weidong, VAN ESCH B P M B, et al. Numerical and experimental investigation of tip leakage vortex trajectory and dynamics in an axial flow pump [J]. Computers & Fluids, 2015, 112: 61-71.
[17] WU H, MIORINI R L, KATZ J. Measurements of the tip leakage vortex structures and turbulence in the meridional plane of an axial waterjet pump [J]. Experiments in fluids, 2011, 50(4): 989-1003.
[18] 施卫东,邵佩佩,张德胜,等.轴流泵运行工况和叶顶间隙对叶顶泄漏涡轨迹的影响[J].排灌机械工程学报,2014,32(5): 373-377.
SHI Weidong, SHAO Peipei, ZHANG Desheng, et al. Influence of operational condition and tip clearance size on trajectory of tip leakage vortex [J]. Journal of Drainage and Irrigation Machinery Engineering, 2014, 32(5): 373-377.
[19] 张德胜,吴苏青,施卫东,等.轴流泵小流量工况条件下叶顶泄漏空化特性[J].农业工程学报,2013,29(22): 68-75.
ZHANG Desheng, WU Suqing, SHI Weidong, et al. Characteristics of tip leakage vortex cavitation in axial flow pump at small flow rate condition [J]. Transactions of the Chinese Society of Agricultural Engineering, 2013, 29(22): 68-75.
[20] TAN D Y, MIORINI R L, KELLER J, et al. Flow visualization using cavitation within blade passage of an axial waterjet pump rotor [C]∥ASME 2012 Fluids Engineering Division Summer Meeting collocated with the ASME 2012 Heat Transfer Summer Conference and the ASME 2012 10th International Conference on Nanochannels, Microchannels, and Minichannels. Rio Grande, Puerto Rico: American Society of Mechanical Engineers, 2012: 395-404.
[21] TAN D Y, LI Y C, WILKS I, et al. Experimental investigation of the role of large scale cavitating vortical structures in performance breakdown of an axial waterjet pump [J]. Journal of Fluids Engineering, 2015, 137(11): 1113011-11130114. |