Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (2): 332-338    DOI: 10.3785/j.issn.1008-973X.2013.02.022
材料科学与工程、化学工程     
立式自吸泵水力性能分析及内部结构的改进
孙幼波, 陈涛, 杨帅, 吴大转, 王乐勤
浙江大学 化学工程与生物工程学系,浙江 杭州310027
Improvement design of hydraulic components and structure of
vertical self-priming pump
SUN You-bo, CHEN Tao, YANG Shuai, WU Da-zhuan, WANG Le-qin
Institute of Chemical Machinery, Zhejiang University, Hangzhou, 310027, China
 全文: PDF  HTML
摘要：

为了在保证自吸性能基础上提高立式自吸泵的效率,在传统自吸泵基础上，提出新型立式自吸泵结构.改进气液分离室及其与蜗壳的匹配关系,采用全新的叶轮和蜗形蜗壳结构,并采用多级副叶轮结构代替单级副叶轮密封、以茶壶嘴结构来保证自吸泵的自吸性能.基于内部流动数值模拟分析传统立式自吸泵和新型立式自吸泵内部流动结构,研究产生流动损失的主要部位以及损失机理.数值模拟结果与试验结果取得较好地一致,结果表明,自吸泵相比普通离心泵的额外功耗主要源于气液分离室和副叶轮,改进后的新型立式自吸泵在保证自吸性能的基础上,效率得到明显提高.结果可为类似自吸泵结构的改进设计提供参考.
Abstract:

To improve the vertical self-priming pump’s performance, a novel self-priming pump construction is presented on the basis of the traditional structure. Optimized hydraulic components and matching structures between the volute and the air-water separation chamber were adopted to reduce the hydraulic losses. Multistage auxiliary-impeller was used to reduce the mechanical losses while improving the sealing performance. A special discharge structure was also proposed to ensure the self-priming performance. Three dimensional simulation of the internal flow in the self-priming pump was carried out to find the main loss areas and its loss mechanism. The simulation results are in good agreement with the experimental results, and show that the air-water separation chamber and the auxiliary-impeller are the main places of extra loss in the self-priming pump. The experimental results indicate that the improved self-priming pump structure has both good self-priming performance and high efficiency. The new structure of the vertical self-priming pump and its design method can provide reference for the similar pump.
Key words:
出版日期: 2013-02-01
:  TH 311  
基金资助:

国家自然科学基金资助项目（50906074）；浙江省重点科技创新团队项目（2012R10001-07）.
通讯作者: 吴大转，男，副教授.     E-mail: wudazhuan@zju.edu.cn
作者简介: 孙幼波（1987—），女，硕士生，主要从事流体机械结构优化及控制的研究.E-mail:sunyoubo@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

孙幼波, 陈涛, 杨帅, 吴大转, 王乐勤. 立式自吸泵水力性能分析及内部结构的改进[J]. J4, 2013, 47(2): 332-338.

SUN You-bo, CHEN Tao, YANG Shuai, WU Da-zhuan, WANG Le-qin. Improvement design of hydraulic components and structure of
vertical self-priming pump. J4, 2013, 47(2): 332-338.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2013.02.022    或    http://www.zjujournals.com/eng/CN/Y2013/V47/I2/332

［1］ 吕智军,兰才有,王福军.自吸泵研究现状及发展趋势［J］.排灌机械,2005,23(3): 15.
LV Zhi-jun, LAN Cai-you, WANG Fu-jun. The present status and development of self-priming pump ［J］. Drainage and Irrigation Machinery, 2005, 23(3): 1-5.
［2］ 袁寿其,王新坤.我国排灌机械的研究现状与展望［J］.农业机械学报,2008,39(10): 52-58.
YUAN Shou-qi, WANG Xin-kun. Present research situation and perspective of drainage and irrigation machinery in China ［J］. Transactions of the Chinese Society for Agricultural Machinery,2008,39(10): 52-58.
［3］ 王春林,司艳雷,郑海霞,等.旋流自吸泵内部流场的数值模拟［J］.排灌机械,2008,26(2): 31-35.
WANG Chun-lin, SI Yan-lei, ZHENG Hai-xia, et al. Numerical simulation of rotational interior flow in self-priming pump［J］. Drainage and Irrigation Machinery, 2008, 26(2): 31-35.
［4］ 李红,王涛.自吸泵内部流场的数值模拟及性能预测［J］.排灌机械工程学报,2010,28(3): 194-197.
LI Hong, WANG Tao. Numerical simulation of interior flow and performance prediction for self-priming pump［J］. Journal of Drainage and Irrigation Machinery Engineering,2010,28(3): 194-197.
［5］ CARIDAD J, KENYERY F. CFD analysis of electric submersible pumps(EPS) handing two-phase mixtures［J］. Transaction of the ASME: Journal of Energy Resource Technology, 2004, 126(2): 99-104
［6］ MAHID K. Numerical study of unsteady flow in centrifugal pump ［J］. Journal of Turbo Machinery, 2005,127(2): 363-371.
［7］ 崔玉松,司艳雷,易同祥,等.旋流自吸泵气液分离室结构对性能影响的预测［J］.排灌机械,2009,27(2): 119-123.
CUI Yu-song, SI Yan-lei, YI Tong-xiang, et.al. Numerical study on separation chamber of rotational flow in self-priming pump ［J］. Drainage and Irrigation Machinery, 2009,27(2): 119-123.
［8］ 黄欢明,高红,沈枫.轴流泵内流场的数值模拟与实验［J］.农业机械学报,2008,39(8): 66-69.
HUANG Huan-ming, GAO Hong, SHEN Feng, et al. Numerical simulation and experimental validation of the flow field in axial flow pump ［J］. Transactions of the Chinese Society for Agricultural Machinery, 2008,39(8): 66-69.
［9］ SHUKLA SHYAM N, KSHIRSAGAR J. Numerical simulation of tip clearance flow in semi-open impeller pump ［C］∥5th Joint ASME/JSME Fluids Engineering Summer Conference, FEDSM 2007. San Diego, CA: United states, 2007, part B: 821-830.
［10］ 杨昌明,陈次昌,王金诺,等.轴流泵端壁间隙流动特性的数值研究［J］.机械工程学报,2003,39(9): 49-51.
YANG Chang-ming, CHEN Ci-chang, WANGN Jin-nuo, et al. Numerical study for behavior of tip clearance flow in axial-flow pump ［J］. Chinese Journal of Mechanical Engineering, 2003,39(9): 49-51.
［11］ 吴大转,王乐勤.开敞式混流泵内流的数值模拟与出水机构选择［J］.机械工程学报,2008,44（8）: 90-96.
WU Da-zhuan, WANG Le-qin. Numerical simulation of flow in open-type mixed flow pump and options of the discharge structures［J］. Chinese Journal of Mechanical Engineering, 2008, 44(8): 90-96.
［12］ 吴大转,蒋庆磊,武鹏,等.开敞式离心泵模型水力性能的研究［J］.工程热物理学报,2010,31（11）: 1851-1854.
WU Da-zhuan, JIANG Qing-lei, WU Peng, et al. Study on hydrodynamic performance of centrifugal pump with open type diffuser ［J］. Journal of Engineering Thermophysics,2010, 31(11): 1851-1854.
[1] 吴大转, 许斌杰, 武鹏, 李志峰, 王乐勤. 多级离心泵内部间隙流动与泄漏损失[J]. J4, 2011, 45(8): 1393-1398.
[2] 蒋庆磊, 邢桂坤, 吴大转, 王乐勤. 离心泵内小间隙环流瞬态流体力计算[J]. J4, 2012, 46(5): 929-934.