Please wait a minute...
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
    
Dynamic analysis of humanoid lower limb based on PAM
JIANG Fei long, TAO Guo liang, LIU Hao, ZHAO Yong, LI Qin gwei
State Key Laboratory of Fluid Power Transmission and Control, Zhejiang University, Hangzhou, 310027, China
Download:   PDF(1240KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

The makeup and role of human lower limb bones and skeletal muscles were analyzed in order to better understand the role of lower limb muscle in human movement. Flexible parallel mechanism humanoid lower limb was proposed and pneumatic artificial muscle (PAM) was taken as driver. The rotatory morement that  ankle joint  rotating around vertical axis was transferred to the knee joint. Dynamic equation of hip joint was calculated through combining virtual work, Jacobian matrix and PAM which is single rigid block with each other. Kinematics characteristics of muscles were analyzed through simulation. Results shows that in the bearing period, supporting phase and swing phase of lower limb movement cycle, rectus femoris, gracilis, musculi triceps surae and lateral group muscle with similar kinetic characteristics.Hamstring, biceps flexor cruris and anterior group muscle work in contrary way. Gluteus maximus and adductor almost keep static.



Published: 01 November 2015
CLC:  TP 24  
Cite this article:

JIANG Fei long, TAO Guo liang, LIU Hao, ZHAO Yong, LI Qin gwei. Dynamic analysis of humanoid lower limb based on PAM. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(11): 2054-2062.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008 973X.2015.11.005     OR     http://www.zjujournals.com/eng/Y2015/V49/I11/2054


基于气动肌肉仿人下肢动力学

为了更好地了解肌肉在人下肢运动过程中的作用,分析人体下肢骨、骨骼肌的组成和功能,提出以气动肌肉作为驱动元件的柔性并联机构仿人下肢,并且踝关节绕垂直轴的旋转运动移动到膝关节.通过单刚体形式的气动肌肉、虚功原理、结构矩阵相结合推导包含肌肉的仿人下肢髋关节动力学方程,同时仿真分析各肌肉的运动学特性.结果表明,在下肢单腿运动周期的承重期、支撑相和摆动相内,股直肌、薄股肌、小腿三头肌、外侧群肌运动特性相近,大腿后侧肌群、股二头肌、前群肌的运动特性相反,臀大肌、内收肌基本不运动.

[1] VANDERBORGHT B, VANHAM R, VERRELST B, et al. Overview of Lucy project: dynamic stabilization of a biped powered by pneumatic artificial muscles [J].Advanced Robotics, 2008, 22(10):1027-1051.
[2] WALKER R. The shadow biped[EB/OL]. [2013 08 21].http:∥www.shadow.org.uk/projects/biped.shtml
[3] TAKUMA T, HOSODA K. Controlling the walking period of a pneumatic muscle walker[J]. The International Journal of Robotics Research, 2006,25(9):861-866.
[4]HOSODA K, TAKUMA T, NAKAMOTO A, et al. Biped robot design powered by antagonistic pneumatic actuators for multi modal locomotion [J].Robotics and Autonomous Systems,2008,56 (1):46-53.
[6]NARIOKA K, HOSODA K. Design synergistic walking of a whole body humanoid driven by pneumatic artificial muscles: an empiricial study [J]. Advanced Robotics, 2008, 22(10): 1107-1123.
[7]HOSDA K, SAKAGUCHI Y, TAKAYAMA H, et al. Pneumatic driven jumping robot with anthropomorphic muscular skeleton structure [J]. Auton Robot,2010,28(3):307-316.
[8] OGAWA K, NARIOKA K, HOSODA K. Development of whole body humanoid ‘Pneumat BS′ with Pneumatic musculoskeletal system[C]∥ Proceedings of 2011 IEEE/RSJ International Conference on Robots and Systems Intelligent Robots and Systems (IROS). [S. l.]: IEEE, 2011:4838-4843.
[9] NIIYAMA R.Design principle based on maximum output force profile for a musculoskeletal robot [J]. Industrial Robot: an International Journal, 2010,37 (3) : 250-255.
[10] NIIYAMA R, NISHIKAWA S, KUNIYOSHI Y. Athlete robot with applied human muscle activation patterns for bipedal running[C]∥ Proceedings of 2010 IEEE RAS International Conference on Humanoid Robots. [S. l.]: IEEE, 2010: 498-503.
[11] 柏树令,应大君,丁文龙等.系统解剖学[M].北京:人民卫生出版社, 2010.
[12] 黄真,赵永生,赵铁石.高等空间机构学[M].北京:高等教育出版社, 2012:169-182.
[13] LIU Shan zeng,YU Yue qing,ZHU Zhen cai, et al. Dynamic modeling and analysis of 3 RRS parallel manipulator with flexible links [J].Journal of Central South University, 2010, 17 (2): 323-331.
[14] ABDELLATIF H, HEIMANN B. Computational efficient inverse dynamics of 6 DOF fully parallel manipulators by using the Lagrangian formalism [J].Mechanism and Machine Theory,2009,44(1):192-207.
[15] YEN Ping lang, LAI Chi chung. Dynamic modeling and control of a 3 DOF Cartesian parallel manipulator [J]. Mechatronics, 2009, 19(3):390-398.
[16]GUO H B, LI H R. Dynamic analysis and simulation of a six degree of freedom Stewart platform manipulator [J]. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2006, 220(1):61-72.
[17]HUANG L,XU W L, TORRANCE J. Design of a position and force control scheme for 6RSS parallel robots and its application in chewing robots [J]. International Journal of Humanoid Robotics, 2010, 7(3): 477-489.
[18] DUAN Q J, DUAN X C. Analysis of cable actuated parallel robot with variable length and velocity cable [J]. Procedia Engineering, 2011(15): 2732-2737.
[19] TSAI LW. Solving the inverse dynamics of a Stewart Gough manipulator by the principle of virtual work [J]. Journal of Mechanical design, 2000,122(1):1-9.
[20] 李永刚, 宋轶民, 冯志友,等. 基于牛顿 欧拉法的3 RPS并联机构逆动力学分析.航空学报[J]. 2007, 28(5):1210-1214.
LI Yong gang, SONG Yin min, Feng Zhi you, et al. Inverse dynamic of 3 RPS parallel mechanism by Newton Euler formulation [J]. Acta Aeronautica Et Astronautica Sinica, 2007, 28(5):1210-1214.
[21]WANG Jin song, WU Jun, WANG Li ping, et al. Simplified strategy of the dynamic model of a 6 UPS parallel kinematic machine for real time control [J]. Mechanism and Machine Theory, 2007,42 (9):1119-1140.
[22] LEE SH, SONG JB, CHOI WC, et al. Position control of a Stewart platform using inverse dynamics control with approximate dynamics [J]. Mechatronics, 2003, 13(6):605-619.

[1] GAO De-dong, LI Qiang, LEI Yong, XU Fei, BAI Hui-quan. Geometric approximation approach based research on kinematics of bevel-tip flexible needles[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(4): 706-713.
[2] ZHANG Ming-kui, CHENG Wen-ming, LIU Fang. Coupling effect between load characteristics and joint driving characteristics of powered exoskeleton[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(4): 807-816.
[3] TANG Zhi-dong, YUN Chao. Quick action coupling technology in full-automatic quick coupling device: a review[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(3): 461-470.
[4] QIAN Long hao, HU Shi qiang, YANG Yong sheng. Analytical inverse kinematics algorithm for double-octahedral variable geometry truss manipulators[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(1): 75-81.
[5] CHEN Peng, XIANG Ji, WEI Wei. Torque limit constrained control of redundant manipulator based on GWLN method[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2017, 51(1): 68-74.
[6] ZHANG Yong tao, SONG Zhi wei, WANG Yi, NIAN Shan po. Robot position and rotation calibration method based on precision of spatial mesh[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(10): 1980-1986.
[7] XU Xian jin, WU Long hui, YANG Xiao jun, TANG Liang, YANG Yong feng. Magnetic driving method of inspection robot for HVDC transmission lines[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(10): 1937-1945.
[8] ZHU Yu shi, YANG Can jun, WU Shi jun, XU Xiao le, ZHOU Pu zhe, SHAN Xin. Steering performance of underwater glider in water column monitoring[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(9): 1637-1645.
[9] JIA Song min, LU Ying bin, WANG Li jia, LI Xiu zhi, XU Tao. Mobile robot human tracking using hierarchical features[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(9): 1677-1683.
[10] LIU Ya nan, NI He peng, ZHANG Cheng rui WANG Yun fei; SUN Hao chun. PC-based open control platform design of integration of machine vision and motion control[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(7): 1381-1386.
[11] DING Xia qing, DU Zhuo yang, LU Yi qing, LIU Shan. Visual trajectory planning for mobile robots based on hybrid artificial potential field[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(7): 1298-1306.
[12] ZHANG A long, ZHANG Ming, QIAO Ming jie, ZHU Wei dong, MEI Biao. Base frame calibration of circumferential splice drilling system based on visual measurement[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(6): 1080-1087.
[13] JIANG Wen ting, GONG Xiao jin, LIU Ji lin. Incremental large scale dense semantic mapping[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(2): 385-391.
[14] HUANG Shui hua, JIANG Pei,WEI Wei, XIANG Ji, PENG Yong gang. Attitude pointing control of manipulator based on quaternion[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(1): 173-179.
[15] HUANG Qi wei, ZHANG Ming, QU Wei wei, LU Xian gang, KE Ying lin. Posture optimization and smoothness for robot drilling[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(12): 2261-2268.