Please wait a minute...
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
    
Correcting method of hole position for flexible track automatic drilling system
BI Yun bo1, TU Guo jiao1, FANG Wei2, SHEN Li heng2, LI Ru peng2
1. Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China;2. Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China
Download:   PDF(1167KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  
A method of hole position correction for a flexible track automatic drilling system with six axes was proposed in order to meet the high drilling accuracy requirement of aerospace fuselage join assembly. The method was presented by measuring and computing the normal vector of the reference holes through four non contact laser displacement sensors. The error of reference holes can be obtained based on the vision measurement system. A position correction method using error data of reference holes was developed by interpolating the Coons surface. Then the position correction can be realized by adding error to the nominal coordinates of the holes. The method was tested on a cylinder model. Results indicate that the method accounting for the changing curvature of the panel shape has higher accuracy of hole position correction and can effectively meet the geometric accuracy requirement of aircraft panels compared with the double linear interpolating method.


Published: 29 October 2015
CLC:  TH 12  
Cite this article:

BI Yun bo, TU Guo jiao, FANG Wei, SHEN Li heng, LI Ru peng. Correcting method of hole position for flexible track automatic drilling system. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(10): 1863-1869.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008 973X.2015.10.006     OR     http://www.zjujournals.com/eng/Y2015/V49/I10/1863


环形轨自动化制孔系统孔位修正方法

为了满足大型飞机机身段壁板对接面区域的高质量制孔要求, 提出基于六轴联动环形轨自动化制孔系统的孔位修正方法. 该方法采用激光位移传感器以非接触测量的方式测量并求解得到基准孔的法矢, 结合视觉测量系统获取的基准孔孔位误差, 通过插值Coons曲面方法计算待加工孔的孔位误差向量, 并补偿至理论坐标, 实现孔位修正. 利用筒状飞机机身壁板模型对该方法进行验证. 结果表明, 与双线性插补方法相比,该方法综合考虑了壁板外形表面曲率变化因素, 孔位修正精度较高, 保证了机身段壁板对接区域制孔的几何精度要求.

[1] 许国康.自动钻铆技术及其在数字化装配中的应用[J].航空制造技术,2005(6): 4549.XU Guo kang. Automatic riveting technology and the apply in digital assembly [J]. Aeronautical Manufacturing Technology, 2005 (6): 45-49.
[2] ZHU W, QU W. An off line programming system for robotic drilling in aerospace manufacturing [J]. International Journal of Advanced Manufacturing Technology, 2013, 68(9 12): 2535-2545.
[3] 薛汉杰,张敬佩.蒙皮类部件钻孔法向的测量和调整[J].航空制造技术,2010(23): 60-62.
XUE Han jie, ZHANG Jing pei. Normal measurement and adjustment for skin drilling [J]. Aeronautical Manufacturing Technology, 2010(23): 60-62.
[4] 秦现生,汪文旦,楼阿莉,等.大型壁板数控制孔的三点快速调平算法[J].航空学报, 2007, 28(6): 1455-1460.
QIN Xian sheng, WANG Wen dan, LOU A li, et al. Three point bracket regulation algorithm for drilling and riveting of aerofoil [J]. Acta Aeronautica et Astronautica Sinica, 2007, 28(6): 1455-1460.
[5] 张来喜,王兴松.曲面柔性制孔机器人末端执行器及其法向姿态调整的一种新算法[J].东南大学学报: 英文版, 2012, 28(1): 29-34.
ZHANG Lai xi, WANG Xing song. A novel algorithm of normal attitude regulation for the designed end effector of a flexible drilling robot [J]. Journal of Southeast University: English Edition, 2012, 28(1): 29-34.
[6] 邹冀华,周万勇,韩先国.飞机装配中基于3 RPS的并联机构法向调整算法[J].中国机械工程, 2011, 22(5): 557-560.
ZOU Ji hua, ZHOU Wan yong, HAN Xian guo. Normal adjusting algorithm of a 3 RPS parallel mechanism in airplane assembly [J]. China Mechanical Engineering, 2011, 22(5): 557-560.
[7] BI Yun bo, JIANG Yi hang, LI Yong chao, et al. A new flexible track automatic drilling system [J]. Mechanics and Materials, 2013, 433435: 2178-2183.
[8] 江一行.环形轨自动化制孔系统开发及其运动学方程解析[D].杭州:浙江大学, 2014.JIANG Yi hang. Development and kinematics equation analysis of flexible track automatic drilling system [D]. Hangzhou: Zhejiang University, 2014.
[9] 毕运波,李永超,顾金伟,等.机器人自动化制孔系统[J].浙江大学学报:工学版,2014, 48(8): 1427-1433.
BI Yun bo, LI Yong chao, GU Jin wei, et al. Robotic automatic drilling system [J]. Journal of Zhejiang University: Engineering Science, 2014, 48(8): 1427-1433.
[10] TIAN Wei, ZHOU Wei xue, ZHOU Wei, et al. Auto normalization algorithm for robotic precision drilling system in aircraft component assembly [J]. Chinese Journal of Aeronautics, 2013, 26(2): 495-500.
[11] FAUX I D, PRAT M J. Computational geometry for design and manufacture [M]. Chichester: Ellis Horwood Ltd, 1979.
[12] FERGUSON J C. Multivariable curve interpolation, report No. D2 22504 [R]. Seattle: The Boeing Company, 1963.
[13] FERGUSON J C. Multivariable curve interpolation [J]. Journal of the ACM, 1964, 11(2): 221-228.
[14] BOYD S, VANDENBERGHE L. Convex optimization [M]. England: Cambridge University Press, 1906.
[15] 朱心雄.自由曲线曲面造型技术[M].北京:科学出版社,2000.

[1] LI Te,Rui Zhi yuan,LEI Chun li,GUO Jun feng,HU Chi bing. Simulation of thermal characteristics of high speed spindle considering air gap variation[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(5): 941-948.
[2] JI Yu,QIU Qing ying,FENG Pei en,HUANG Hao. Extraction and utilization of design knowledge in international patent classification[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(3): 412-418.
[3] LV Mao yin, XU Yue tong, YE Guo yun,YAO Xin hua. Optimal design of asymmetric steering mechanism based on quantum behaved particle swarm optimization algorithm[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2016, 50(2): 218-223.
[4] CHEN Shi, YANG Zhi yuan, SUN Ling yun, LOU Yun. Research on design knowledge analytical method during sketching —— combining acoustic energy feature and creative segment theory[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(11): 2073-2082.
[5] FENG Yan, YU Xiao-li, LIU Zhen-tao. Fractal model of normal contact stiffness based on thermal elasto-plastic theory[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(8): 1553-1558.
[6] WU Chen-rui, ZHANG Shu-you, LIU Xiao-jian. Product scheme design evaluation based on coupling network analysis of cluster parameters[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2015, 49(8): 1495-1502.
[7] CAO Yan-long, ZHAO Kui, YANG Jiang-xin, ZHENG Jin-zhong. Identification and elimination method of HoQ technical characteristics self-conflict[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(11): 1994-2001.
[8] CHEN Jin, QING Fei, PANG Xiao-ping. Optimal design of backhoe hydraulic excavator working device based on synthesis digging[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(9): 1654-1660.
[9] GAI Yu-chun, ZHU Wei-dong, KE Ying-lin. Stiffness parameter configuration of cartesian positioner components[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(8): 1434-1441.
[10] LIU Hui-jing, HONG Jun, YANG Guo-qing, ZHU Lin-bo. Tangential sliding characteristics of asperities[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(6): 1114-1119.
[11] CAO Yan-long, ZHAO Kui, YANG Jiang-xin, ZHENG Jin-zhong. Identification and elimination method of HoQ technical characteristics selfconflict[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(6): 1-.
[12] YANG Wei, ZHANG Xiu-feng, YANG Can-jun, WU Hai-jie. Design of a lower extremity exoskeleton
based on 5-bar human machine model
[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(3): 430-435.
[13] LIU Zheng, GU Xin-jian, PAN Kai, YANG Qing-hai. Research on TRIZ-based product eco-design
——Integrating rule-based reasoning and case-based reasoning
[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(3): 436-444.
[14] JI Xiang, GU Xin-jian, DAI Feng, LIU Zheng. BioTRIZ-based product innovative design process[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2014, 48(1): 35-41.
[15] GAI Yu-chun, ZHU Wei-dong, KE Ying-lin. Design and analysis of fuselage supporting position for aircraft final assembly[J]. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2013, 47(12): 2176-2183.