Please wait a minute...
浙江大学学报(工学版)
J4  2013, Vol. 47 Issue (2): 209-215    DOI: 10.3785/j.issn.1008-973X.2013.02.003
    
Modeling and simulation of wear for alignment mechanism of
large aircraft component
YING Zheng, ZHANG Ming, WANG Qing, KE Ying-lin
State Key Lab of Fluid Power Transmission and Control, Zhejiang University, Hangzhou 310027, China
Download:   PDF(0KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

To predict the wear extent of spherical joints in alignment mechanism of large aircraft component, a wear model of spherical joint with clearance was proposed. The kinematic model of spherical joint was constructed according to its geometric condition. Continuous contact force model with hysteresis damping coefficient and Coulomb friction law with modification were utilized to develop the dynamic model of spherical joint. The Archard’s equation was employed to model the wear of spherical joint. To acquire the distribution of wear depth, the surface on the ball and socket was discretized for calculating and storing wear depth. Hertz contact theory was used to obtain the distribution of contact force. Process simulation of alignment mechanism with four positioners was carried out. From the result acquired, it shows that the distribution of wear on the surface is not uniform, and the total wear volumes of each spherical joint are not uniform either. This wear model is also able to be applicable for life prediction and mechanical design of alignment mechanism.

Published: 01 February 2013
CLC:  TH 122  
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
Cite this article:

YING Zheng, ZHANG Ming, WANG Qing, KE Ying-lin. Modeling and simulation of wear for alignment mechanism of
large aircraft component. J4, 2013, 47(2): 209-215.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2013.02.003     OR     http://www.zjujournals.com/eng/Y2013/V47/I2/209


飞机大部件调姿机构磨损预测模型的构建与仿真

针对飞机大部件调姿机构球铰磨损量预测问题,提出一种含间隙的球铰磨损模型.根据球铰的几何结构构建运动学模型；采用含迟滞阻尼系数的连续接触力模型与改进Coulomb摩擦力模型建立球铰的动力学模型；结合Archard方程建立球铰的磨损模型.为了能够获得接触表面的磨损分布情况,将磨损表面离散,借助Hertz接触理论计算接触力的分布,并以离散后的单张曲面为单元分别计算与保存单张曲面磨损量.针对一种四定位器的调姿机构,模拟调姿过程进行仿真计算,结果显示：单个球头表面磨损分布并不均衡,4个球头之间的磨损分布情况类似,但是磨损量存在一定的差异.该磨损模型能够用于调姿机构寿命的预测,并对调姿机构的机械设计提供参考.

［1］ 郭志敏,蒋君侠,柯映林.一种精密三坐标POGO柱设计与精度研究［J］.浙江大学学报,工学版,2009,43(9): 1649-1654.
GUO Zhi-min, JIANG Jun-xia, KE Ying-lin. Design and accuracy for POGO stick with threeaxis ［J］. Journal of Zhejiang University: Engineering Science, 2009, 43(9): 1649-1654.
［2］ 邵荷生,曲敬信,许小棣,等.摩擦与磨损［M］.北京:煤炭工业出版社,1992.
［3］ 吴国清,张晓峰,方亮,等.两体磨料磨损的三维动态模拟［J］.摩擦学学报,2000,20(5): 360-364.
WU Guo-qing, ZHANG Xiao-feng, FANG Liang, et al. 3-D dynamic simulation of two-body abrasion ［J］. Tribology, 2000, 20(5): 360-364.
［4］ DUFRANE K F, KANNEL J W, MCCLOCKEY T H. Wear of steam turbine journal bearings at low operating speeds ［J］. Journal of Lubrication Technology, 1983,105: 313-317.
［5］ GERTZOS K P, NIKOLAKOPOULOS P G, CHASALEVRIS A C, et al. Wear identification in rotor-bearing systems by measurements of dynamic bearing characteristics ［J］. Computers and Structures, 2011, 89(1/2): 55-66.
［6］ FLORES P. Modeling and simulation of wear in revolute clearance joints in multibody systems ［J］. Mehcanism and Machine, 2009, 44(6): 1211-1222.
［7］ FIALHO J C, FERNADES P R, EA L, et al. Computational hip joints simulator for wear and heat generation ［J］. Journal of Biomechanics, 2007, 40(11): 2358-66.
［8］ HIRANI H, VERMA M. Tribological study of friction in worn misaligned journal bearings under severe hydrodynamic lubrication ［J］. Tribology International, 2009, 42(2): 378-390.
［9］ DUBOWSKY S, FREUDENSTEIN F. Dynamic analysis of mechanical systems with clearances, Part 1: Formation of dynamic model ［J］. Journal of Engineering for Industry, 1971, 93(1): 305-309.
［10］ HUNT K H, CROSSLEY F R E. Coefficient of restitution interpreted as damping in Vibroimpact ［J］. Journal of Applied Mechanics, 1975, 7(2): 440-445.
［11］ HERTZ H. On the contact of solids-On the contact of ridid elastic solids and on hardness (Translated by D. E. Jones and G.A.Schott) ［J］. Miscellaneous Papers, 1986: 146-183.
［12］ ROONEY G T, DERAVI P. Coulomb friction in mechanism sliding joints ［J］. Mechanism and Machine Theory, 1982, 17(3): 207-211.
［13］ ARCHARD J F. Contact and rubbing of flat surfaces ［J］. Journal of Applied Physics, 1953, 24(8): 981-988.
［14］ RYAN R R. ADAMS-multibody system analysis software, multibody systems handbook ［M］. Berlin: Springer-Verlag, 1990.
［15］ ZHANG B, YAO B G, KE Y L. A novel posture alignment system for aircraft wing assembly ［J］. Journal of Zhejiang University-Science A, 2009, 10(11): 1624-1630.
[1] YANG Wei, ZHANG Xiu-feng, YANG Can-jun, WU Hai-jie. Design of a lower extremity exoskeleton
based on 5-bar human machine model[J]. J4, 2014, 48(3): 430-435.
[2] LIU Zheng, GU Xin-jian, PAN Kai, YANG Qing-hai. Research on TRIZ-based product eco-design
——Integrating rule-based reasoning and case-based reasoning[J]. J4, 2014, 48(3): 436-444.
[3] JI Xiang, GU Xin-jian, DAI Feng, LIU Zheng. BioTRIZ-based product innovative design process[J]. J4, 2014, 48(1): 35-41.
[4] LIN Xiao-hua, FENG Yi-xiong, TAN Jian-rong. Intervals prediction of system reliability parameters based on immune optimization[J]. J4, 2013, 47(6): 1013-1021.
[5] YING Zheng, WANG Qing, LI Jiang-xiong, KE Ying-lin,SUN Wen-bo,HAN Yong-wei. Motion data integration and monitoring of digital assembly system of aircraft[J]. J4, 2013, 47(5): 761-767.
[6] LIU Xi-ze, QI Guo-ning, FU Jian-zhong, FAN Bei-bei, XU Jing. A design process model of integrated morphological matrix and
conflict resolving principles[J]. J4, 2012, 46(12): 2243-2251.
[7] HUANG Xue-mei, ZHANG Lei-an, WEI Xiu-ting. D-MFAC algorithm control of megawatt wind turbine
blade static loading process[J]. J4, 2012, 46(12): 2280-2284.
[8] . Constraint model and calculating method by evolutionary game algorithm for product conceptual design[J]. J4, 2012, 46(3): 533-541.
[9] LUO Cheng-dui, FENG Yi-xiong, TAN Jian-rong, AN Xiang-hua. Group multicriteria solving for product design scheme based on semantic PROMETHEE[J]. J4, 2012, 46(3): 524-532.
[10] AN Xiang-hua, FENG Yi-xiong, TAN Jian-rong. Collaborative evaluation method for product concept based on
Choquet integral and evidence theory[J]. J4, 2012, 46(1): 163-169.
[11] MA Zhi-yong, QIU Qing-ying, FENG Pei-en, SHEN Men-hong, ZENG Ling-bin. Concept system and application method of mechanical symmetry[J]. J4, 2010, 44(12): 2354-2359.
[12] ZHANG Xiu-Fen, ZHANG Shu-Wei, YI Guo-Dong. Multi-granularity and hierarchy disassemblability evaluation model
and methodology for products[J]. J4, 2010, 44(3): 581-588.
[13] JIANG Wei-Guang, WU Jian-Wei, TUN Can, et al. Ontology based product knowledge integration[J]. J4, 2009, 43(10): 1801-1807.
[14] LIU Hai-Jiang, JI Yang-Jian, QI Guo-Ning, et al. Product integrated design knowledge model supporting multidisciplinary design optimization[J]. J4, 2009, 43(10): 1841-1847.
[15] FU Yu-Ying, BO Xiao-Hong, WANG Zheng-Xiao. Supply chain multiobjective optimization based on fuzzy cooperative game[J]. J4, 2009, 43(09): 1644-1648.