机械工程 |
|
|
|
|
注射成形中聚合物熔体黏度的在线测量装置 |
张剑锋1( ),赵朋1,*( ),周宏伟2,傅建中1,陈子辰1 |
1. 浙江大学,浙江省三维打印工艺与装备重点实验室,浙江 杭州 310027 2. 泰瑞机器股份有限公司,浙江 杭州 310018 |
|
On-line measurement device for viscosity of polymer melt during injection molding process |
Jian-feng ZHANG1( ),Peng ZHAO1,*( ),ZHOU Hong-wei 2,Jian-zhong FU1,Zi-chen CHEN1 |
1. Key Laboratory of 3D Printing Process and Equipment of Zhejiang Province, Zhejiang University, Hangzhou 310027, China 2. Tederic Machinery Co. Ltd, Hangzhou 310018, China |
引用本文:
张剑锋,赵朋,周宏伟,傅建中,陈子辰. 注射成形中聚合物熔体黏度的在线测量装置[J]. 浙江大学学报(工学版), 2020, 54(8): 1474-1480.
Jian-feng ZHANG,Peng ZHAO,ZHOU Hong-wei ,Jian-zhong FU,Zi-chen CHEN. On-line measurement device for viscosity of polymer melt during injection molding process. Journal of ZheJiang University (Engineering Science), 2020, 54(8): 1474-1480.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2020.08.004
或
http://www.zjujournals.com/eng/CN/Y2020/V54/I8/1474
|
1 |
ZHANG J F, ZHAO P, ZHAO Y, et al On-line measurement of cavity pressure during injection molding via ultrasonic investigation of tie bar[J]. Sensors and Actuators A: Physical, 2018, 285 (1): 118- 126
|
2 |
ZHOU H. Computer modeling for injection molding: simulation, optimization, and control [M]. Hoboken: Wiley, 2013.
|
3 |
HSU C L, TURNG L S, OSSWALD T A, et al Effect of pressure and supercritical fluid on melt viscosity of LDPE in conventional and microcellular injection molding[J]. International Polymer Processing, 2012, 27 (1): 18- 24
doi: 10.3139/217.2493
|
4 |
YAO D, CHEN S C, KIM B H Rapid thermal cycling of injection molds: an overview on technical approaches and applications[J]. Advances in Polymer Technology, 2010, 27 (4): 233- 255
|
5 |
GAO R X, TANG X, GORDON G, et al Online product quality monitoring through in-process measurement[J]. CIRP Annals, 2014, 63 (1): 493- 496
doi: 10.1016/j.cirp.2014.03.041
|
6 |
赵丽娟, 许琪, 姚燕青, 等 超声波在线检测高分子材料在流变仪中的挤出行为: I[J]. 高分子材料科学与工程, 2013, (8): 146- 149 ZHAO Li-juan, XU Qi, YAO Yan-qing, et al On-line detection of extrusion behavior of polymer materials in rheometer by ultrasonic method: I[J]. Polymer Materials Science and Engineering, 2013, (8): 146- 149
|
7 |
赵丽娟, 钟琴, 庄红军, 等 超声波在线检测聚合物材料在流变仪中的挤出行为: Ⅱ[J]. 高分子材料科学与工程, 2014, (4): 106- 109 ZHAO Li-juan, ZHONG Qin, ZHUANG Hong-jun, et al On-line detection of extrusion behavior of polymer materials in rheometer by ultrasonic method: Ⅱ[J]. Polymer Materials Science and Engineering, 2014, (4): 106- 109
|
8 |
K?PPLMAYR T, LUGER H J, BURZIC I, et al A novel online rheometer for elongational viscosity measurement of polymer melts[J]. Polymer Testing, 2016, 50: 208- 215
doi: 10.1016/j.polymertesting.2016.01.012
|
9 |
LEWANDOWSKI K, PISZCZEK K, ZAJCHOWSKI S, et al Rheological properties of wood polymer composites at high shear rates[J]. Polymer Testing, 2016, 51: 58- 62
doi: 10.1016/j.polymertesting.2016.02.004
|
10 |
ZATLOUKAL M Measurements and modeling of temperature-strain rate dependent uniaxial and planar extensional viscosities for branched LDPE polymer melt[J]. Polymer, 2016, 104: 258- 267
doi: 10.1016/j.polymer.2016.04.053
|
11 |
KLAIBER F. Design, construction and analysis of a high pressure slit rheometer [D]. Wisconsin: University of Wisconsin-Madison, 2005.
|
12 |
严波, 李阳, 赵朋, 等 基于改进有限体积法的三维注塑成型充模过程数值模拟[J]. 机械工程学报, 2015, 51 (10): 25- 32 YAN Bo, LI Yang, ZHAO Peng, et al 3D simulation of filling stage of plastic injection molding based on improved finite volume method[J]. Journal of Mechanical Engineering, 2015, 51 (10): 25- 32
doi: 10.3901/JME.2015.10.025
|
13 |
赵朋, 赵耀, 严波, 等 注射成型中聚合物剪切诱导结晶行为的三维模拟[J]. 化工学报, 2017, 68 (11): 4359- 4366 ZHAO Peng, ZHAO Yao, YAN Bo, et al Three-dimensional simulation of shear-induced crystallization for polymers during injection molding process[J]. CIESC Journal, 2017, 68 (11): 4359- 4366
|
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|