机械与能源工程 |
|
|
|
|
表面芯吸性对淬火过程中沸腾传热特性的影响 |
牟林巍1, 张宇鸿1, 李佳琦1, 张嘉懿1, 蒋平2, 范利武1 |
1. 浙江大学 热工与动力系统研究所, 浙江 杭州 310027;
2. 北京宇航系统工程研究所, 北京 101300 |
|
Surface wicking effect on boiling heat transfer during quenching |
MOU Lin-wei1, ZHANG Yu-hong1, LI Jia-qi1, ZHANG Jia-yi1, JIANG Ping2, FAN Li-wu1 |
1. Institute of Thermal Science and Power Systems, Zhejiang University, Hangzhou 310027, China;
2. Beijing Institute of Astronautical System Engineering, Beijing 101300, China |
引用本文:
牟林巍, 张宇鸿, 李佳琦, 张嘉懿, 蒋平, 范利武. 表面芯吸性对淬火过程中沸腾传热特性的影响[J]. 浙江大学学报(工学版), 2018, 52(5): 960-965.
MOU Lin-wei, ZHANG Yu-hong, LI Jia-qi, ZHANG Jia-yi, JIANG Ping, FAN Li-wu. Surface wicking effect on boiling heat transfer during quenching. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(5): 960-965.
链接本文:
http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.05.016
或
http://www.zjujournals.com/eng/CN/Y2018/V52/I5/960
|
[1] BUONGIORNO J. Can corrosion and CRUD actually improve safety margins in LWRs?[J]. Annals of Nuclear Energy, 2014, 63(1):9-21.
[2] VOROBYEV A Y, GUO C. Metal pumps liquid uphill[J]. Applied Physics Letters, 2009, 94(22):986.
[3] COURBIN L, BIRD J C, REYSSAT M, et al. Dynamics of wetting:from inertial spreading to viscous imbibition[J], Journal of Physics Condensed Matter, 2009, 21(46):464127.
[4] LITER S G. KAVIANY M. Pool-boiling CHF enhancement by modulated porous-layer coating:theory and experiment[J]. International Journal of Heat and Mass Transfer, 2001, 44(22):4287-4311.
[5] WASHBURN E W. The Dynamics of Capillary Flow. Physical Review, 1921, 17(3):273-283.
[6] 纪峰,李娜,宋冉风,等.纺织材料芯吸性能建模预测研究进展[J].纺织学报,2016,37(9):162-168. JI Feng, LI Na, SONG Ran-feng, et al. Review of studies on textile wicking modeling[J]. Journal of Textile Research, 2016, 37(9):162-168.
[7] KIM H D, KIM M H. Effect of nanoparticle deposition on capillary wicking that influences the critical heat flux in nanofluids[J]. Applied Physics Letters, 2007, 91(1):718.
[8] HENDRICKS T J, KRISHNAN S, CHIOI C, et al. Enhancement of pool-boiling heat transfer using nanostructured surfaces on aluminum and copper[J]. International Journal of Heat and Mass Transfer, 2010, 53(15-16):3357-3365.
[9] RAHMAN M M, OLCEROGLU E, MCCARTHY M. Role of wickability on the critical heat flux of structured superhydrophilic surfaces[J]. Langmuir, 2014, 30(37):11225-11234.
[10] LI L, BREEDVELD V, HESS D W. Creation of superhydrophobic stainless steel surfaces by acid treatments and hydrophobic film deposition[J]. ACS Applied Materials and Interfaces, 2012, 4(9):4549.
[11] AHN H S, PARK G, KIM J M, et al. The effect of water absorption on critical heat flux enhancement during pool boiling[J]. Experimental Thermal and Fluid Science, 2012, 42(5):187-195.
[12] FAN L W, LI J Q, LI D Y, et al. Regulated transient pool boiling of water during quenching on nanostructured surfaces with modified wettability from superhydrophilic to superhydrophobic[J]. International Journal of Heat and Mass Transfer, 2014, 76(6):81-89.
[13] BURGGRAF O R. An Exact Solution of the Inverse Problem in Heat Conduction Theory and Applications[J]. ASME Journal of Heat Transfer, 1964, 86(3):373.
[14] FAN L W, LI J Q, ZHANG L, et al. Pool boiling heat transfer on a nanoscale roughness-enhanced superhydrophilic surface for accelerated quenching in water[J]. Applied Thermal Engineering, 2016, 109:630-639.
[15] KANG J Y, LEE G C, KAVIANY M, et al. Minimum film-boiling quench temperature increase by CuO porous-microstructure coating[J]. Applied Physics Letters, 2017, 110(4):043903.
[16] FATEHI M, KAVIANY M. Analysis of levitation of saturated liquid droplets on permeable surfaces[J]. International Journal of Heat and Mass Transfer, 1990, 33(5):983-994. |
|
Viewed |
|
|
|
Full text
|
|
|
|
|
Abstract
|
|
|
|
|
Cited |
|
|
|
|
|
Shared |
|
|
|
|
|
Discussed |
|
|
|
|