Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)  2018, Vol. 52 Issue (1): 36-42    DOI: 10.3785/j.issn.1008-973X.2018.01.006
机械与能源工程     
液滴碰撞不同湿润性表面的行为特征
代超, 纪献兵, 周冬冬, 王野, 徐进良
华北电力大学 多相流与传热北京市重点实验室, 北京 102206
Behavioral characteristics of droplet collision to different wettability surfaces
DAI Chao, JI Xian-bing, ZHOU Dong-dong, WANG Ye, XU Jin-liang
Beijing Key Laboratory of Multiphase Flow and Heat Transfer, North China Electric Power University, Beijing 102206, China
 全文: PDF(2061 KB)   HTML
摘要：

为了探究湿润性对液滴撞击行为特性的影响，制备超亲水、亲水、超疏水高黏附、超疏水低黏附4类湿润性表面.利用直径为1.96、2.61、3.06 mm的液滴，在不同的高度下开展液滴碰撞4类湿润性表面的实验.结果表明，在不同We下，液滴碰撞特性受撞击表面湿润性的影响较大，在亲水以及超亲水表面主要表现为铺展特性，但在超亲水表面扩展更显著；在超疏水低黏附以及高黏附表面主要表现为弹跳特性，但当表面为低黏附时，液滴主要表现为完全弹跳.在We-Re坐标下，4类表面各自的液滴碰撞特性可以划分为差异明显的不同铺展或者弹跳现象.4类表面各自的扩展系数β随无量纲时间τ的变化趋势随We的变化基本保持不变，但β的最大值随We的增大而增大.
Abstract:

Four types of surfaces were prepared in order to analyze the influence of wettability on the droplet collision behavior. They were superhydrophilic, hydrophilic, low adhesive superhydrophobic and high adhesive superhydrophobic surface. Collision experiment was conducted on four surfaces over a wide range of height. Droplet diameters were 1.96 mm, 2.61 mm, 3.06 mm respectively. Droplets exhibited different behavioral characteristics on four surfaces under different We. Droplets mainly exhibit spreading characteristics on hydrophilic and superhydrophilic surfaces, but the extension is more thorough on the superhydrophilic surface. Droplets mainly exhibit rebounce characteristics on low adhesive and high adhesive surface, and droplets can rebound entirely on low adhesive surface. Droplet behaviors could be divided into different regions in the coordinates of We versus Re. The tendency of expansion coefficient β with dimensionless time τ almost does not change and the maximum value of β can increase with the increase of We.
收稿日期: 2017-07-13 出版日期: 2017-12-15
CLC:  TK124  
基金资助:

国家自然科学基金资助项目（51676071）；国家自然科学基金重点资助项目（51436004）.
通讯作者: 纪献兵,男,副教授.orcid.org/0000-0003-3215-6758.     E-mail: jxb@ncepu.edu.cn
作者简介: 代超(1993-),男,硕士生,从事多相流与液滴动力学研究.orcid.org/0000-0003-4883-818X.E-mail:1223909095@qq.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

代超, 纪献兵, 周冬冬, 王野, 徐进良. 液滴碰撞不同湿润性表面的行为特征[J]. 浙江大学学报(工学版), 2018, 52(1): 36-42.

DAI Chao, JI Xian-bing, ZHOU Dong-dong, WANG Ye, XU Jin-liang. Behavioral characteristics of droplet collision to different wettability surfaces. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 2018, 52(1): 36-42.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2018.01.006    或    http://www.zjujournals.com/eng/CN/Y2018/V52/I1/36

[1] 郑志伟,李大树,仇性启,等.液滴碰撞球形凹曲面复合level set-VOF法的数值分析[J]. 化工学报, 2015, 5(66):1667-1675. ZHENG Zhi-wei, LI Da-shu, QIU Xing-qi, et al. Numerical analysis of coupled level set-VOF method on droplet impact on spherical concave surface[J]. Journal of Chemical Industry and Engineering, 2015, 5(66):1667-1675.
[2] 强洪夫,陈福振,高巍然.基于SPH方法的低韦伯数下三维液滴碰撞聚合与反弹数值模拟研究[J]. 工程力学, 2012, 29(2):21-28. QIANG Hong-fu, CHEN Fu-zhen, GAO Wei-ran. Simulation of coalescence and bouncing of three-dimensional droplet collisions with low weber numbers based on SPH method[J]. Engineering Mechanics, 2012, 29(2):21-28.
[3] RICHARD D,QUÉRÉ D. Bouncing water drops[J]. Europhys lett, 2000, 50(6):769-775.
[4] 王磊,淮秀兰,陶毓伽,等.喷雾冷却中微液滴碰撞薄液膜的流动与换热[J]. 工程热物理学报, 2010, 31(6):987-990. WANG Lei, HUAI Xiu-lan, TAO Yu-jia, et al. Flow and heat transfer of micro-droplet impact on thin liqud film during spray cooling[J]. Journal of Engineering Thermophysics, 2010, 31(6):987-990.
[5] 张迪,罗琦,黄伟,等.汽-水分离器内双液滴碰撞的数值模拟研究[J]. 核动力工程, 2015, 36(1):18-22. ZHANG Di, LUO Qi, HUANG Wei, et al. Numerical investigation of binary droplet collision in steam separator[J]. Nuclear Power Engineering, 2015, 36(1):18-22.
[6] 朱君悦,段远源,王晓东,等.流体在固体表面超铺展特性的研究进展[J]. 化工学报, 2014, 65(3):765-776. ZHU Jun-yue, GUAN Yuan-yuan, WANG Xiao-dong, et al. Review of super-spreading of fluids on solid substrates[J]. Journal of Chemical Industry and Engineering, 2014, 65(3):765-776.
[7] ŠIKALO S, MARENGO M, TROPEA C, et al. Analysis of impact of droplets on horizontal surfaces[J]. Experimental Thermal and Fluid Science, 2002, 25(7):503-510.
[8] RIOBOO R, VOUÉ M, VAILLANT A, et al. Drop impact on porous superhydrophobic polymer surfaces[J]. Langmuir the ACS Journal of Surfaces and Colloids, 2008, 24(24):14074-14077.
[9] ROELAND C V D V, HENDRIX M H, TRAN T, et al. How microstructures affect air film dynamics prior to drop impact[J]. Soft Matter, 2014, 10(21):3703.
[10] ZHANG W, YU T, FAN J, et al. Droplet impact behavior on heated micro-patterned surfaces[J]. Journal of Applied Physics, 2016, 119(11):13.
[11] WANG M J, HUNG Y L, LIN F H, et al. Dynamic behaviors of droplet impact and spreading:a universal relationship study of dimensionless wetting diameter and droplet height[J]. Experimental Thermal and Fluid Science, 2009, 33(7):1112-1118.
[12] LEMBACH A N, TAN H B, ROISMAN I V, et al. Drop impact, spreading, splashing, and penetration into electrospun nanofiber Mats[J]. Langmuir the ACS Journal of Surfaces and Colloids, 2010, 26(12):9516-9523.
[13] SEO J, LEE J S, KIM H Y, et al. Empirical model for the maximum spreading diameter of low-viscosity droplets on a dry wall[J]. Experimental Thermal and Fluid Science, 2015, 61:121-129.
[14] MADEJSKI J. Solidification of droplets on a cold surface[J]. International Journal of Heat and Mass Transfer, 1976, 19(9):1009-1013.
[15] ROISMAN I V. Inertia dominated drop collisions. Ⅱ. an analytical solution of the Navier-Stokes equations for a spreading viscous film[J]. Physics of Fluids, 2009, 21(5):296.
[16] DING H, LI E Q, ZHANG F H, et al. Propagation of capillary waves and ejection of small droplets in rapid droplet spreading[J]. Journal of Fluid Mechanics, 2012, 697(4):92-114.
[17] SUN R, BAI H, JU J,et al. Droplet emission induced by ultrafast spreading on a superhydrophilic surface[J]. Soft Matter, 2013, 9(39):9285-9289.
[18] CHEN L, WU J, LI Z, et al. Evolution of entrapped air under bouncing droplets on viscoelastic surfaces[J]. Colloids and Surfaces A Physicochemical and Engineering Aspects, 2011, 384(1-3):726-732.
[19] LIANG G T. Special phenomena of droplet impact on an inclined wetted surface with experimental observation[J]. Acta Physica Sinica, 2013, 62(8):084707.
[20] ROUX D C D, COOPER-WHITE J J. Dynamics of water spreading on a glass surface[J]. Journal of Colloid and Interface Science, 2004, 277(2):424-436.
[21] 杨卧龙,徐进良,纪献兵.超亲水多孔表面的小液滴发射行为及动力学特性[J]. 化工学报, 2016, 67(9):3607-3615. YANG Wo-long, XU Jin-liang, JI Xian-bing.Ejection profile and kinetics of droplets spreading on superhydrophilicporous surfaces[J]. Journal of Chemical Industry and Engineering, 2016, 67(9):3607-3615.
[22] HU H B, CHEN L B, HUANG S H, et al. Rebound behaviors of droplets impacting on a superhydrophobic surface[J]. Science China Physics, Mechanics and Astronomy, 2013, 56(5):960-965.
[23] CHEN L, LI Z. Bouncing droplets onnonsuperhydrophobic surfaces[J]. Physical Review E Statistical Nonlinear and Soft Matter Physics, 2010, 82(1):016308.
[24] 胡海豹,陈立斌,黄苏和,等.水滴撞击黄铜基超疏水表面的破碎行为研究[J]. 摩擦学学报, 2013, 33(5):449-455. HU Hai-bao, CHEN Li-bin, HUANG Su-he, et al. Breakup Phenomenon of droplets impacting on a superhydrophobic brass surface[J]. Tribology, 2013, 33(5):449-455.
[25] TSAI P, HENDRIX M H W, DIJKSTRA R R M, et al. Microscopic structure influencing macroscopic splash at high Weber number[J]. Soft Matter, 2011, 7(24):11325-11333.
[26] BHUSHAN B, HER E K. Fabrication ofsuperhydrophobic surfaces with high and low adhesion inspired from rose petal[J]. Langmuir the ACS Journal of Surfaces and Colloids, 2010, 26(11):8207.
[27] BIANCE A L, CLANET C, QUÉRÉ D. First steps in the spreading of a liquid droplet[J]. Physical Review E Statistical Nonlinear and Soft Matter Physics, 2004, 69(1):016301.
[28] PASANDIDEH-FARD M, QIAO Y M, CHANDRA S, et al. Capillary effects during droplet impact on a solid surface[J]. Physics of Fluids, 1996, 8(3):650-659.
[1] 牟林巍, 张宇鸿, 李佳琦, 张嘉懿, 蒋平, 范利武. 表面芯吸性对淬火过程中沸腾传热特性的影响[J]. 浙江大学学报(工学版), 2018, 52(5): 960-965.
[2] 杨继虎, 孙志坚, 袁瑞峰, 黄浩, 陈天宇, 胡亚才. 电厂氟塑钢空预器的传热与积灰性能研究[J]. 浙江大学学报(工学版), 2018, 52(3): 577-583.
[3] 钟勋, 俞小莉, 吴俊, 蒋平灶. 氧化铝纳米流体在车用热交换器中的试验研究[J]. J4, 2010, 44(4): 761-764.
[4] 李冠球, 李蔚, 张政江, 张巍, 徐志明. 基于冯-卡门类比建立螺纹管内颗粒污垢模型[J]. J4, 2010, 44(3): 494-498.