Please wait a minute...
Chinese Journal of Engineering Design  2000, Vol. 7 Issue (3): 55-56    DOI:
    
Polar Curve and Its Application in Products Design
 JIANG  Xian-Feng, LU  Cong-Da
Download: HTML     PDF(107KB)
Export: BibTeX | EndNote (RIS)      

Abstract  With the method of t ransforming the polar curve into(ρ, θ) descartes coordinate system, an efficient curve design method is presented here w hich may be useful for the product silhouet te curve design.As examples, some real silhouet te curve are constructed w ith this method.

Key wordspolar curve      curve modeling      algorithm     
Published: 28 September 2000
Cite this article:

JIANG Xian-Feng, LU Cong-Da. Polar Curve and Its Application in Products Design. Chinese Journal of Engineering Design, 2000, 7(3): 55-56.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2000/V7/I3/55


极径曲线生成及其在产品设计中的应用

将定义在极坐标系中的极径曲线转换到( ρ, θ) 直角坐标系中进行设计、控制, 研究了用传统的曲线造型方法实现对具有特定要求的零件轮廓曲线的设计、造型方法。作为应用, 还给出了几个零件轮廓曲线设计实例。

关键词: 极径曲线,  曲线造型,  算法 
[1] Zhijun WANG,Xiaotao ZHANG,Mengxiang LI. Research on decoupling algorithm of six-dimensional force sensor based on polynomial fitting[J]. Chinese Journal of Engineering Design, 2023, 30(5): 571-578.
[2] Di ZHAO,Guo CHEN,Xiaoli CHEN,Xiongjin WANG. Terrain adaptive mechanism design and obstacle-surmounting performance analysis of wheeled search and rescue robot[J]. Chinese Journal of Engineering Design, 2023, 30(5): 579-589.
[3] Fangjian DOU,Qingying QIU,Cheng GUAN,Jinjie SHAO,Haifeng WU. Optimization design of acceleration and deceleration curve of winding machine with large moment of inertia[J]. Chinese Journal of Engineering Design, 2023, 30(4): 503-511.
[4] Yumin HE,Ying HAN,Jing ZHOU. Research on adaptive sliding mode control of tower crane based on improved fruit fly optimization algorithm[J]. Chinese Journal of Engineering Design, 2023, 30(3): 271-280.
[5] Ganhua YANG,Qingjun ZENG,Chunwei HAN,Xin HUANG,Xiaoqiang DAI. Design and implementation of soft hand position tracking for human-computer interactive teleoperation robot[J]. Chinese Journal of Engineering Design, 2023, 30(2): 164-171.
[6] Chao JI,Liang WANG,Xiao-jing WANG,Xiao-bing LI,Wen CAO. Design of cable tunnel fault warning system based on MSSA-SVM[J]. Chinese Journal of Engineering Design, 2023, 30(1): 109-116.
[7] Sheng-hu PAN,Lin-cheng XIE,Yun-qiang LIU,Shang-fei XU. Research on workpiece contour recognition method based on surface evaluation[J]. Chinese Journal of Engineering Design, 2023, 30(1): 13-19.
[8] Ming-yan REN,Xu TAN,Ting ZENG,Rong WANG,Hai-yue LI. Six-point leveling algorithm and synchronous control method for horizontal rotating equipment of space station cabin[J]. Chinese Journal of Engineering Design, 2022, 29(6): 676-683.
[9] Xin MI,Hong LI,Yan-qing GUO,Hong-wei GAO,Hao-nan WANG,Yi-fan NING. Parameter optimization of single plunger pump check valve based on linear regression[J]. Chinese Journal of Engineering Design, 2022, 29(6): 705-712.
[10] Sheng-hu PAN,Xiao-jun ZHANG,Dong Lü. Design of a control system of plane machining machine tool based on machine vision[J]. Chinese Journal of Engineering Design, 2022, 29(6): 784-792.
[11] Li-yong TIAN,Ye-xin SUN,Ning YU,Hong-yue CHEN,Chun-ying MA. Research on navigation system of roadheader based on combination mode[J]. Chinese Journal of Engineering Design, 2022, 29(2): 254-262.
[12] Qin LI,Ying-qi JIA,Yu-feng HUANG,Gang LI,Chuang YE. A multi-objective trajectory optimization algorithm for industrial robot[J]. Chinese Journal of Engineering Design, 2022, 29(2): 187-195.
[13] LIANG Dong, LIANG Zheng-yu, CHANG Bo-yan, QI Yang, XU Zhen-yu. Optimal design of assisting-riveting parallel robot for lifting arm of dobby loom[J]. Chinese Journal of Engineering Design, 2022, 29(1): 28-40.
[14] LAI Quan-bao, TAO Qing, HU Yu-ge, MENG Qing-feng. Multi-gesture accurate recognition based on artificial fish swarm algorithm-extreme learning machine[J]. Chinese Journal of Engineering Design, 2021, 28(6): 671-678.
[15] WANG Chun-xiang, JI Kang-hui, WANG Yao, LIU Liu. Review of research on segmentation algorithm in rapid prototyping technology[J]. Chinese Journal of Engineering Design, 2021, 28(4): 399-406.