Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2000, Vol. 7 Issue (3): 57-59    DOI:
    
The Microcomputer Control System on Balance Steelyard
 JIANG  Tian-Yan, CHEN  Tian-Zhou
Computer Department , Zhejiang Universit y, Hangzhou 310027, China
Download: HTML     PDF(129KB)
Export: BibTeX | EndNote (RIS)      

Abstract  This paper is to ex pat iate on the design of a balance steelyard system cont rolled by micro-computer. The system has passed prov incial ident if icat ion and applied some cement factories. Its performance is proved to be stability and credibility. The system helps to improve productivity and product quality remarkably.

Key words： balance steely ard      ADAM     
Published: 28 September 2000
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
JIANG Tian-Yan
CHEN Tian-Zhou
Cite this article:

JIANG Tian-Yan, CHEN Tian-Zhou. The Microcomputer Control System on Balance Steelyard. Chinese Journal of Engineering Design, 2000, 7(3): 57-59.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2000/V7/I3/57


平衡秤微机配料控制系统

主要介绍平衡秤微机控制系统的设计方法, 该系统已通过省级鉴定该产品已在水泥厂实际应用, 系统性能稳定可靠, 提高生产效率和产品质量。

关键词： 平衡秤,  亚当 
[1] WU Yao, CAO Ju-jiang, LIU Yan-song, YAN Wei-liang. Research of the rigid-flexible coupling dynamic balancing on crank-group driving mechanism[J]. Chinese Journal of Engineering Design, 2016, 23(5): 468-480.
[2] LIU Juan-xiu， WU Yi-fei， GUO Jian， LI Rui， CHEN Qing-wei. Modeling and simulation analysis of a walking assistant robot for both plane and stair[J]. Chinese Journal of Engineering Design, 2015, 22(5): 344-350.
[3] LIU Juan-xiu， WU Yi-fei， GUO Jian， LI Rui， CHEN Qing-wei. Modeling and simulation analysis of a walking assistant robot for both plane and stair[J]. Chinese Journal of Engineering Design, 2015, 22(4): 344-350.
[4] YAN Hai-jun, ZHAO Liang, GUO Kong-hui, HUANG Yuan-yi. Roll motion analysis of torsion beam supension based on shear center[J]. Chinese Journal of Engineering Design, 2014, 21(2): 147-153.
[5] ZHOU Kui, WANG Wen-Ge, XIAO Bo. Research on electromechanical co-simulation of multi-axis drum system synchronization control[J]. Chinese Journal of Engineering Design, 2013, 20(5): 368-374.
[6] HUI Ji-Zhuang, WEI Fang-Sheng, GAO Kai, DING Xiang. Study on dynamics simulation of redundantly actuated parallel robot based on ADAMS[J]. Chinese Journal of Engineering Design, 2012, 19(5): 362-365.
[7] XIAO Qi-Ming, SHEN Jian-Hao. Characteristic analysis and optimization of IHI swing flying shearing based on ADAMS[J]. Chinese Journal of Engineering Design, 2012, 19(5): 345-349.
[8] WU Xiao-Jun, ZHENG Chao, LU Chao, LIU Jian-Hui. The research on optimization of Macpherson suspension based on genetic algorithm and ADAMS[J]. Chinese Journal of Engineering Design, 2012, 19(4): 274-277.
[9] NI Jun, XU Bin. Modeling and handling stability simulation of a FSAE racing car based on ADAMS[J]. Chinese Journal of Engineering Design, 2011, 18(5): 354-358.
[10] ZHI Jin-Ning, ZHANG Hong, LI Jie. Parametric simulation study on the cushioning system of impact roller[J]. Chinese Journal of Engineering Design, 2011, 18(2): 87-92.
[11] REN Yun-Peng, ZHANG Tian-Xia, CHEN Xi-Hong, ZHANG Ji-Lei, ZHANG Hong-Jun, SONG Lian-Guo, HAN Qing-Kai, WEN Bang-Chun. Kinematics simulations of forging manipulator based on virtual prototype technology[J]. Chinese Journal of Engineering Design, 2008, 15(2): 101-104.
[12] WU Qing-Ming, MEI Hua-Feng, ZHANG Zhi-Qiang. Study on multi-body dynamics simulation of linkage based on ADAMS[J]. Chinese Journal of Engineering Design, 2005, 12(6): 344-347.