Please wait a minute...
Chinese Journal of Engineering Design  2014, Vol. 21 Issue (1): 87-91    DOI: 10.3785/j.issn. 1006-754X.2014.01.015
    
Research on evaluating methods of situation awareness of digital graphical interfaces
JIN Tao1,2,XUE Cheng-qi1,WANG Hai-yan1,NIU Ya-feng1
1.College of Mechanical Engineering, Southeast University, Nanjing 211189, China;2.College of Mechanical & Electrical Engineering, China University of Petroleum, Qingdao 266580, China
Download: HTML     PDF(1376KB)
Export: BibTeX | EndNote (RIS)      

Abstract  To evaluate Situational Awareness (SA) objectively,a novel experimental procedure and paradigm were proposed according to the required operation tasks to be finished while the new technology route combining behavior experiment with Event Related Potential (ERP) experiment was used. Three evaluating indicators of feedback negativity,reaction time and accuracy were used to reflecte the perceptual,understanding and judgment of SA of digital Graphical User Interfaces (GUI),which provided a new thinking and new method for the quantitative evaluation of SA. Finally,an application example of the objective evaluation to fighter UI by 22 subjects was given to validate the feasibility and effectiveness of the method. Experiment results show that the electrical feedback negative wave presents the experimental results of objective data which can be used to compare the subjective perceptual quality of users on different interface, and the contrastive analysis of reaction time and accuracy can reflect understanding and judgment of UI to evaluate the SA of UI.

Key wordssituation awareness      ERP      accuracy      reaction time      feedback negativity     
Published: 28 February 2014
Cite this article:

JIN Tao,XUE Cheng-qi,WANG Hai-yan,NIU Ya-feng. Research on evaluating methods of situation awareness of digital graphical interfaces. Chinese Journal of Engineering Design, 2014, 21(1): 87-91.

URL:

https://www.zjujournals.com/gcsjxb/10.3785/j.issn. 1006-754X.2014.01.015     OR     https://www.zjujournals.com/gcsjxb/Y2014/V21/I1/87


数字图形界面态势感知的评测方法研究

为解决数字图形界面态势感知(SA)难以被客观评测的问题,根据界面作业所需完成的操作任务,提出新的实验流程和范式,采用行为实验和脑电实验相结合的新技术路线,以脑电反馈负波、反应时和正确率三个评价指标分别来衡量SA的“感知性、理解性和可判断性”,为SA的客观评价方法研究提供了新思路和新方法.以战机界面为例,通过22名被试者对空空对战任务进行实例验证.结果表明:通过分析脑电反馈负波呈现实验的客观数据,可实现对SA感知性的评价;通过对界面任务反应时和正确率的对比分析,能实现对SA可理解性和可判断性的评测,从而实现对数字图形界面SA的客观综合评价.

关键词: 态势感知,  脑电实验,  正确率,  反应时,  反馈负波 
[1] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[2] MA Ning, YANG Bo, LIU Yan-chao, LI Jin-ping, GAO Chang-qing. Multi-domain view model of part for progressive transformation of design state[J]. Chinese Journal of Engineering Design, 2021, 28(3): 255-267.
[3] WANG Chun-xiang, HAO Lin-wen, WANG Yao, ZHOU Guo-yong, JI Kang-hui, LIU Liu. Automatic repair of scattered point cloud hole based on GA-BP neural network[J]. Chinese Journal of Engineering Design, 2021, 28(2): 155-162.
[4] WU Cong-kui, HE Bai-yan, YUAN Peng-fei. Thermal-structural analysis of hoop deployable antenna with metal hinges[J]. Chinese Journal of Engineering Design, 2020, 27(3): 349-356.
[5] HE Gai-yun, ZHANG Xiao-lei, ZHANG Da-wei, SUN Guang-ming. Research on three-dimensional evaluation method for repeated positioning accuracy of machine tool linear axis[J]. Chinese Journal of Engineering Design, 2019, 26(4): 371-378.
[6] WEN Rui-qiao, YANG Meng-ou, LIU Tao, ZHANG Jun-fu. Time-dependent kinematic reliability analysis of robot manipulators[J]. Chinese Journal of Engineering Design, 2018, 25(1): 50-55.
[7] WANG Ying-long, LIU Ai-lian, ZHAI Shao-lei, ZHU Quan-cong, GU Hong-bo, LI Chuan. Research on application of fundamental wave extraction algorithm based on adaptive frequency tracking[J]. Chinese Journal of Engineering Design, 2018, 25(1): 56-61.
[8] CHENG Ming, CHEN Zhao-bo, KIM Kyongsol, JIAO Ying-hou. Design and analysis of MR damper with multistage serpentine magnetic circuit[J]. Chinese Journal of Engineering Design, 2017, 24(3): 350-358.
[9] NAN Jing-chang, BAO Xiao-wei, GUO Ying-yan. Design and implementation of high precision RFID positioning system based on low frequency trigger[J]. Chinese Journal of Engineering Design, 2017, 24(2): 225-231.
[10] GUAN Yu-ming, LIU Hui-juan, LIU Qin, WANG Xi-rui, XU Bo. Research and application of risk priority number ranking method based on the economic losses[J]. Chinese Journal of Engineering Design, 2016, 23(3): 217-221.
[11] WEI Zhong-Bin, HE Yu-Min, DUAN Zhi-Shan, GAO Pan, SHEN Peng. Construction and application of the decoupling wavelet bases based on Hermite interpolation[J]. Chinese Journal of Engineering Design, 2013, 20(3): 208-211.
[12] CHENG Xiang, LI Li, HUANG Yu-Mei, YANG Xian-Hai, LIU Jun-Ying. Accuracy design method of multi-axis micro milling machines[J]. Chinese Journal of Engineering Design, 2013, 20(2): 102-106.
[13] LI Li-Juan, HUANG Zhen-Hua, LIU Feng. An improved multi-objective group search optimization algorithm applied to structural optimal design[J]. Chinese Journal of Engineering Design, 2013, 20(1): 11-17.
[14] ZHANG Can, LIU Feng, LI Li-Juan. Improved bacterial foraging algorithm and its application to design of frame structures[J]. Chinese Journal of Engineering Design, 2012, 19(6): 422-427.
[15] CHEN Xu-Dong, FENG Pan. The performance analysis and system optimization of the composite position control system of DC motor[J]. Chinese Journal of Engineering Design, 2012, 19(5): 391-399.