Please wait a minute...
Chinese Journal of Engineering Design  2009, Vol. 16 Issue (1): 21-26    DOI:
    
Nonlinear damping sensitivity analysis of floating raft vibration-isolating system under multi-source excitation
 ZHAO  Qun, ZHANG  Yi-Min
School of Mechanical Engineering & Automation, Northeastern University, Shenyang 110004, China
Download: HTML     PDF(1221KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Sensitivity analysis and optimization of complex structure is the key problem of structure design. By utilizing mobility method, response and characteristics of power flow of floating raft vibration-isolating system under multi-source excitation was analyzed. Sensitivity analysis method was adopted to analyze the sensitivity of given parameters as well as the sensitivity when there exists nonlinear damp in this system. Research on sensitivity of system characteristics on these parameters was carried out and then the effect of the parameter change was estimated, which was employed to guide optimization of system structure. 

Key wordsmultiple sources      floating raft      powerflow      mobility      non-linear damping      sensitivity     
Published: 28 February 2009
Cite this article:

ZHAO Qun, ZHANG Yi-Min. Nonlinear damping sensitivity analysis of floating raft vibration-isolating system under multi-source excitation. Chinese Journal of Engineering Design, 2009, 16(1): 21-26.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2009/V16/I1/21


多源激励下浮筏隔振系统非线性阻尼灵敏度分析

复杂结构的灵敏度分析及其优化是结构设计的重要问题.利用导纳法分析多源激励浮筏隔振系统振动响应和功率流特性,用灵敏度分析方法研究系统对于给定参数的灵敏度,并对系统中存在非线性阻尼时的灵敏度进行分析.研究系统特性对这些参数的敏感程度,估计参数变化的效果,从而指导系统结构的优化.

关键词: 多源,  浮筏,  功率流,  导纳,  非线性阻尼,  灵敏度 
[1] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[2] Ze-jun WEN,Xiang-heng MENG,Zhao XIAO,Fan ZHANG. Sensitivity analysis of airfoil aerodynamic characteristics based on NT-net method and Morris method[J]. Chinese Journal of Engineering Design, 2022, 29(4): 438-445.
[3] Jing-liang WANG,Tian-cheng ZHU,Long-biao ZHU,Fei-yun XU. Research on variable density topology optimization method for continuum structure[J]. Chinese Journal of Engineering Design, 2022, 29(3): 279-285.
[4] TAO Xiao-dong, GUO An-fu, LI Hui, HAN Wei, LI Wan-cai, LI Tao. Performance analysis and optimization of disc ditcher based on sensitivity analysis[J]. Chinese Journal of Engineering Design, 2022, 29(1): 59-65.
[5] LIU Ruo-chen, XU Cheng, WANG Kui-yang, WANG Yi-min, SUN Jian-zhong. Research on performance parameters of new wear-site electrostatic sensor[J]. Chinese Journal of Engineering Design, 2020, 27(5): 645-653.
[6] TAO Xiao-hui, LI Guo-long, XU Kai, LI Chuan-zhen. Sensitivity analysis of geometric error of worm wheel gear grinding machine[J]. Chinese Journal of Engineering Design, 2020, 27(1): 111-120.
[7] LI Cheng-bing, YE Chao, MAO Xi-hao. Application of LSSVM optimized by improved artificial bee colony algorithm in quantitative analysis of mixture gas[J]. Chinese Journal of Engineering Design, 2020, 27(1): 94-102.
[8] TAN Hui, ZONG Kuan, XIONG Chang-wu, WENG Xia, DU Ping-an. Design and heat transfer performance analysis of leaf vein-shaped microchannel heat sink[J]. Chinese Journal of Engineering Design, 2019, 26(4): 477-483.
[9] CUI Guo-hua, CUI Kang-kang, WU Hai-miao, ZHANG Yan-wei, LIU Jian. Reliability analysis for pressing force of prestressed concrete cylinder pipe port grinding robot[J]. Chinese Journal of Engineering Design, 2018, 25(6): 647-654.
[10] TANG Lin, XU Zhi-pei, HE Tian-long, AO Wei-chuan. Sensitivity analysis of rotation frame stability based on BP neural network[J]. Chinese Journal of Engineering Design, 2018, 25(5): 576-582.
[11] ZHANG Ri-cheng, ZHAO Jiong, WU Qing-long, XIONG Xiao-lei, ZHOU Qi-cai, JIAO Hong-yu. Variable density topology optimization method considering structural stability[J]. Chinese Journal of Engineering Design, 2018, 25(4): 441-449.
[12] WANG Yong-feng, FAN Shun-cheng, LIU Geng-qian, ZHANG Xiao-jun, LU Guang-da. Research on a class of 3-RPS parallel mechanism with arc prismatic pairs[J]. Chinese Journal of Engineering Design, 2017, 24(6): 717-724.
[13] DUAN Fu-bin, PAN Jun, CHEN Wen-hua, XU Han-hui, YANG Li-kang. Damping force modeling and sensitivity analysis of double-tube hydraulic damper[J]. Chinese Journal of Engineering Design, 2017, 24(2): 149-155.
[14] ZHANG Qiang, WANG Hai-jian, HU Nan. Study on injury and fatigue life forecast of gantry crane's girder under rising load[J]. Chinese Journal of Engineering Design, 2015, 22(5): 461-468.
[15] ZHANG Yi-min, Lv Hao . An analytical methodology of reliability and sensitivity analysis for mechanical components considering the times of load action[J]. Chinese Journal of Engineering Design, 2014, 21(2): 119-123.