Please wait a minute...
Chinese Journal of Engineering Design  2005, Vol. 12 Issue (3): 152-158    DOI:
    
Research on driving system design and simulation of unmanned ground weapon mobile platform
 WEI  Pi-Yong1,2, YAN  Qing-Dong1, MA  Yue1
1. College of Mechanical and Vehicle Engineering, Beijing University of Technology, Beijing 100081, China;
2. Department of Mechanical and Electric Engineerng, Jiaozuo University, Jiaozuo 454001, China
Download: HTML     PDF(574KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Base driving is the supporting technology of electric unmanned ground weapon mobile platform (EUGWMP). Whether batteries, electric motors and the platform body match well will directly influence the tactical and technical performance of EUGWMP. Therefore, it is of extreme importance to study on distribution of dynamic power, torque of inside and outside motors, consumption of dynamic battery power, and discharge efficiency of EUGWMP in running and off-road operation. From the perspective of system, by adopting EUGWMP data simulation system (EUGWMPSim), comprehensive simulation analysis and research on the driving system of the platform are conducted and some valuable conclusions have been drawn, which are beneficial reference for the research of EUGWM.

Key wordsunmanned ground mobile platform      pararmeter design      electric driving system      match      mobile robot     
Published: 28 June 2005
Cite this article:

WEI Pi-Yong, YAN Qing-Dong, MA Yue. Research on driving system design and simulation of unmanned ground weapon mobile platform. Chinese Journal of Engineering Design, 2005, 12(3): 152-158.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2005/V12/I3/152


无人地面武器机动平台驱动系统设计与仿真研究

电动式无人地面武器机动平台底层驱动是基础支撑技术。电池、电机、平台本体三者之间匹配好坏将直接影响无人地面武器平台战术技术性能,研究平台行驶越野环境下的驱动电动机的功率、扭矩、动力电池的功率消耗及荷电状态等对无人地面武器机动平台驱动系统的设计是十分重要的。从系统的角度, 应用开发的无人地面武器机动驱动系统数字仿真系统(EUGWMPSim),对平台的驱动系统进行全面的仿真分析与研究,得出的结论对无人地面武器机动平台的研究有参考作用。

关键词: 无人地面机动平台,  参数设计,  驱动系统,  匹配,  移动机器人 
[1] Qin LI,Rui YAN,Zhiqiang HUANG,Gang LI. Research on matching design and optimization of drive motor of electric drive vibroseis[J]. Chinese Journal of Engineering Design, 2023, 30(2): 172-181.
[2] Dong ZHOU,Xin WEN,Jing WANG,Tao XIONG,Dong-ting SUN,Guang-ju DAN,Yang LIU. Study on matching characteristics of centrifugal vapor compressor and evaporator in MVR system[J]. Chinese Journal of Engineering Design, 2022, 29(5): 595-606.
[3] Meng LI,Zong-jun YIN. Research on comprehensive quality assessment method for parts[J]. Chinese Journal of Engineering Design, 2022, 29(4): 410-418.
[4] ZHENG Ming-jun, ZHAO Chen-lei, WU Wen-jiang, YANG She. Analysis and optimization of all-terrain mobile robot body structure[J]. Chinese Journal of Engineering Design, 2021, 28(2): 195-202.
[5] ZHANG Shi-miao, SHAO Hong-yu, CHEN Chen, CHEN Yong-liang. Service matching method for surplus sheet material resource in cloud manufacturing environment[J]. Chinese Journal of Engineering Design, 2021, 28(2): 121-131.
[6] WANG Xin-yu, PING Xue-liang. Speed control method of mobile robot based on multi-sensor fusion information[J]. Chinese Journal of Engineering Design, 2021, 28(1): 63-71.
[7] WANG Wei, ZHANG Kai-yan, LIU Ya-chuan, HUANG Yu-chun. Research on two-step alignment method for 3-D point cloud and its application[J]. Chinese Journal of Engineering Design, 2020, 27(5): 560-567.
[8] ZHAO Ze-yu, Lü Jian, PAN Wei-jie, HOU Yu-kang, FU Qian-wen. Research on VR spatial cognition based on virtual reproduction behavior[J]. Chinese Journal of Engineering Design, 2020, 27(3): 340-348.
[9] WANG Chun-xiang, WANG Yao, HAO Zhi-bo. Segmentation adaptive slicing algorithm based on features of parts in additive manufacturing[J]. Chinese Journal of Engineering Design, 2020, 27(3): 373-379.
[10] LU Wan-jie, FU Hua, ZHAO Hong-rui. Equipment recognition of mining patrol robot based on deep learning algorithm[J]. Chinese Journal of Engineering Design, 2019, 26(5): 527-533.
[11] HE Gai-yun, PANG Kai-rui, SANG Yi-cun, LIU Chen-hui, WANG Hong-liang. Application of surface matching method in tool path optimization[J]. Chinese Journal of Engineering Design, 2019, 26(2): 190-196.
[12] YIN He-sheng, ZHANG Qiu-ju, NING Meng. Design of synchronous steering mechanism of driving wheel for omnidirectional mobile robot[J]. Chinese Journal of Engineering Design, 2018, 25(2): 230-236.
[13] WANG Wei-jun, YANG Gui-lin, ZHANG Chi, CHEN Qing-ying. Design and realization of powered caster wheel for omnidirectional mobile robot[J]. Chinese Journal of Engineering Design, 2016, 23(6): 633-638.
[14] LI Yong-le, NAN Jing-chang, YOU Chang-jiang, DU Xue-kun, JIANG Di. Design of highly efficient broadband Class-E power amplifier based on improved matching network[J]. Chinese Journal of Engineering Design, 2015, 22(2): 178-184.
[15] XIA Lei, JIANG Hao-bin. Design improvement of vehicle bumper anti-collision beam based on stiffness matching[J]. Chinese Journal of Engineering Design, 2015, 22(1): 84-88.