Please wait a minute...
Chinese Journal of Engineering Design  2010, Vol. 17 Issue (3): 219-223    DOI:
    
BP neural network study on predicting vapor cloud explosion overpressure
 ZHANG  Rui-Hua
College of Mechanical and Electrical Engineering, Zhongkai University of Agriculture and Engineering, Guangzhou 510225, China
Download: HTML     PDF(663KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The basic principle of predicting vapor cloud explosion overpressure by BP neural network was discussed. The influencing factors of overpressure were analyzed emphatically. Based on this, a network model between overpressure and its influencing factors was established after a training process with 80 experimental data groups. Using this model, prediction was conducted for other 20 data groups. The results show the model is basically capable of formulating the relationship between overpressure and its influencing factors. It is an effective means for the predicting vapor cloud explosion overpressure. It is of certain practical significance and applicative value in engineering.

Key wordsvapor cloud explosion (VCE)      overpressure      BP neural network      prediction     
Published: 28 June 2010
CLC:  O 38  
  X 91  
Cite this article:

ZHANG Rui-Hua. BP neural network study on predicting vapor cloud explosion overpressure. Chinese Journal of Engineering Design, 2010, 17(3): 219-223.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2010/V17/I3/219


基于BP人工神经网络的蒸气云爆炸超压预测的研究

探讨用BP神经网络预测蒸气云爆炸超压的基本原理.重点分析影响蒸气云爆炸超压的各种因素,在此基础上利用BP神经网络算法,通过对80组不同反应活性气体在不同环境条件下爆炸的实验数据进行训练建立了预测蒸气云爆炸超压的网络模型,并对另外20组实验数据进行了爆炸超压预测.预测结果与实测结果基本吻合,说明该模型能够反映蒸气云爆炸超压与其多种影响因素的映射关系,可用于蒸气云爆炸超压预测.该方法为预测蒸气云爆炸超压提供了一条新途径,具有工程实际意义.

关键词: 蒸气云爆炸,  超压,  BP神经网络,  预测 
[1] Shijie WANG,Long WANG,Shuo MA,Jie YANG,Cong MA,Guolin DUAN. Digital prediction method for delay information for preparing FGMs parts by direct write forming[J]. Chinese Journal of Engineering Design, 2023, 30(2): 127-135.
[2] Jiadong WANG,Ming HU,Wei YAN,Haoran LI. Prediction method of intrinsic damage dissipation for low cycle fatigue life considering average strain[J]. Chinese Journal of Engineering Design, 2023, 30(2): 136-143.
[3] Chun-jian HUA,Dong-dong LI,Yi JIANG,Jian-feng YU,Ying CHEN. Study on fatigue life of shaft with V-notch under dual-frequency excitation[J]. Chinese Journal of Engineering Design, 2023, 30(1): 102-108.
[4] XIAO Zhen, HE Yan, LI Yu-feng, WU Peng-cheng, LIU De-gao, DU Jiang. Application of improved MDSMOTE and PSO-SVM in classification prediction of automobile combination instrument[J]. Chinese Journal of Engineering Design, 2022, 29(1): 20-27.
[5] YAN Bao-ming, PAN Wei-jie, Lü Jian, WANG Yi, ZHAO Ze-yu. Prediction of natural gesture interaction time for VR placement task[J]. Chinese Journal of Engineering Design, 2021, 28(3): 296-304.
[6] ZHONG Jian, YAN Chun-ping, CAO Wei-dong, CHEN Cheng. Low carbon optimization decision for high-speed dry hobbing process parameters based on BP neural networks and FPA[J]. Chinese Journal of Engineering Design, 2017, 24(4): 449-458.
[7] ZHANG Gen-bao, XU Fu-wei, RAN Yan, ZHANG Xiao-gang. Research on similarity evaluation and reliability prediction of mechanical structure[J]. Chinese Journal of Engineering Design, 2017, 24(3): 264-272.
[8] DENG Tao, LI Jun-ying, LUO Jun-lin, ZHOU Hao. The simulation and analysis of ABS based on grey prediction and sliding mode variable structure[J]. Chinese Journal of Engineering Design, 2017, 24(1): 64-69.
[9] SHEN Jie-bin, TANG Dong-lin. Study of field size parameter in stress field intensity approach[J]. Chinese Journal of Engineering Design, 2016, 23(1): 22-27.
[10] LIU Zhe, TAO Feng-he, JIA Chang-zhi. Fatigue life prediction on drive shaft of tracked vehicle and structure optimization[J]. Chinese Journal of Engineering Design, 2015, 22(5): 431-437.
[11] YUAN Si-Cong, LI Chao, AN Feng, ZHANG Chen, WANG Rong. A metal milling burr prediction based on combination algorithm[J]. Chinese Journal of Engineering Design, 2013, 20(1): 39-43.
[12] WU Shu-liang, CHEN Jian-hong, YANG Shan. Optimization of bolting scheme based on combination of principal component analysis and BP neural network[J]. Chinese Journal of Engineering Design, 2012, 19(2): 150-155.
[13] QIN Dai-Cheng, MA Tian-Zheng, ZHANG Yi-Min, LU Hao. Reliability sensitivity analysis of two column ROPS of loader[J]. Chinese Journal of Engineering Design, 2011, 18(5): 337-340.
[14] LIU Guo-Bin, GONG Guo-Fang, ZHU Bei-Dou, SHI Hu. Adaptive PID control for thrust speed of the shield based on BP neural networks[J]. Chinese Journal of Engineering Design, 2010, 17(6): 454-458.
[15] YANG Chun-Hui, YANG Jian-Jun, HU Tao. Method of maintainability prediction of complex equipment based on CPN simulation[J]. Chinese Journal of Engineering Design, 2010, 17(1): 25-29.