Please wait a minute...
Chinese Journal of Engineering Design  2007, Vol. 14 Issue (2): 144-147    DOI:
    
Numerical simulation of flow field on ventilation system of flow-bulb hydrogenerator
HU  Xuan,WANG  Feng-Qi,GUO  Wei,XU  Hong-Jing
School of Mechanical Engineering, Tianjin University, Tianjin 300072,China
Download: HTML     PDF(206KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The flow field of ventilation system for flow-bulb hydrogenerator was simulated by applying CFD software FLUENT. And its 3D model was established by using the standard κ-ε turbulence model as the physical model of flow. The reliability of numerical simulation was validated by comparing simulated resultsof air distribution with the measured data from motor. This research indicates that under reasonable simplification, the ventilation system of flowbulb hydrogenerator could be simulated accurately by CFD, which provides references for its design and optimization.

Key wordsflow-bulb hydrogenerator      numerical simulation      ventilation system      flow field     
Published: 28 April 2007
Cite this article:

HU Xuan,WANG Feng-Qi,GUO Wei,XU Hong-Jing. Numerical simulation of flow field on ventilation system of flow-bulb hydrogenerator. Chinese Journal of Engineering Design, 2007, 14(2): 144-147.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2007/V14/I2/144


灯泡贯流式水轮发电机通风系统流场的数值模拟

以计算流体力学(CFD)软件FLUENT为工具,对灯泡贯流式水轮发电机通风系统的流场进行数值模拟。建立了灯泡贯流式水轮发电机通风系统的三维几何通风模型,用标准κ-ε湍流模型作为气流的物理模型,并对计算出的电机空气风量分配情况与实测数据进行比较,验证了数值模拟的可靠性。研究表明,在合理的简化条件下,采用CFD能准确地模拟灯泡贯流式水轮发电机的通风系统流场,为进行灯泡贯流式水轮发电机通风系统设计和优化提供有效的依据。

关键词: 灯泡贯流式水轮发电机,  数值模拟,  通风系统,  流场 
[1] Qin LI,Yuwei LEI,Haoxiang SUN,Maolin DAI,Ke CHEN. Study on downhole flow field and chip removal performance of laser mechanical drill bit based on EDEM-Fluent coupling[J]. Chinese Journal of Engineering Design, 2023, 30(4): 521-530.
[2] Xiao-hua ZHU,Cong LI,Wei-ji LIU,Bin TAN,Wen XU. Study on bottom hole thermal-fluid-solid coupling of PDC bit in strong abrasive formation[J]. Chinese Journal of Engineering Design, 2022, 29(4): 446-455.
[3] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[4] Chao-qun MA,Kai ZHANG,Lin CHAI,Bao-lin LIU,Qin ZHOU. Research on internal flow field law of mechanical automatic vertical drilling tool actuator[J]. Chinese Journal of Engineering Design, 2022, 29(3): 384-393.
[5] XIONG Wei, GE Zhi-hua, PANG Qiao, LI Man-di, WANG You. Theoretical design and experimental study on interference of hub bearing unit[J]. Chinese Journal of Engineering Design, 2021, 28(1): 41-47.
[6] ZHANG Yi-cong, ZHU Wei, WU Yu-guo, SHI Li-ping. Numerical simulation of sealing performance of Reuleaux triangular micro-dimpled textured end face[J]. Chinese Journal of Engineering Design, 2020, 27(1): 103-110.
[7] HOU Yong-jun, LI Fen, WU Xian-jin, LIU You-ping. Numerical simulation study of the performance of gas-liquid ejector in negative pressure drilling fluid shale shaker[J]. Chinese Journal of Engineering Design, 2019, 26(4): 423-432.
[8] ZHANG Xiao-dong, CHEN Long. Research on valve seat cone angle of new inner blowout preventer based on erosion wear theory[J]. Chinese Journal of Engineering Design, 2019, 26(3): 287-298.
[9] ZHONG Gong-xiang, ZOU Di, ZHANG Xing. Design and simulation of triangular air-powered rotary enginebased on CFD and ADAMS[J]. Chinese Journal of Engineering Design, 2019, 26(3): 305-314.
[10] ZHU Xiao-hua, FAN Cheng, LIU Shang. Liquid-solid two-phase flow erosion numerical simulation of neo-type hydraulic impactor[J]. Chinese Journal of Engineering Design, 2019, 26(1): 87-94.
[11] LI Shun-ming, WANG Yi-bo, GU Xin-zhong. Energy-saving optimization design of a lawn mower based on flow field analysis[J]. Chinese Journal of Engineering Design, 2018, 25(6): 683-689.
[12] ZHANG Yuan, PENG Zhen-hua, GAO Ding-xiang, REN Hai-tao, TANG Yi-xin. Design and mixing performance research of core tube heavy oil mixing and diluting mixer[J]. Chinese Journal of Engineering Design, 2018, 25(5): 510-517.
[13] YANG Wen-jun, HUI Li, ZHOU Song, MA Shao-hua, YUAN Hui-qun. Aerodynamic load analysis of compressor blade based on stator-rotor interaction effect[J]. Chinese Journal of Engineering Design, 2018, 25(5): 567-575.
[14] DENG Rong, HOU Kai, LI Meng-hua, LI Xiang-dong. Study on rock breaking performance of hybrid single cone bit[J]. Chinese Journal of Engineering Design, 2018, 25(3): 262-269.
[15] XING Meng-long, LIU Jia-xin, LU Chun-guang, JIANG Yan-kun. Improvement and signal-to-noise ratio analysis of cooling fan for grader[J]. Chinese Journal of Engineering Design, 2017, 24(5): 563-571.