Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2006, Vol. 13 Issue (6): 374-376    DOI:
    
Analysis and determination of design limited value based on reliability
 DAI  Zong-Miao, DU  Jun-Min
713 Research Institute of China Shipbuilding Industry Corporation， Zhengzhou， 450015, China
Download: HTML     PDF(135KB)
Export: BibTeX | EndNote (RIS)      

Abstract  Analysis and research on reliability design limited value of major performance parameter during product design are conducted. By Montc Carlo simulation method and performance parameter reliability evaluation method, comprehensive analysis of random variables and determination of reliability design limited value are implemented. Then, implementation way to guarantee reliability index during product design process is put forward, which provides quantitative reference for product manufacture check and application inspection.

Key words： reliability      Montc Carlo      limited value     
Published: 28 May 2006
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
DAI Zong-Miao
DU Jun-Min
Cite this article:

DAI Zong-Miao, DU Jun-Min. Analysis and determination of design limited value based on reliability. Chinese Journal of Engineering Design, 2006, 13(6): 374-376.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2006/V13/I6/374


基于可靠性的设计门限值的分析与确定

针对设计过程中所需确定的产品主要参数的可靠性设计门限值进行了分析。通过采用蒙特卡洛仿真方法和性能性参数可靠性评定方法，实现了随机变量的综合分析和可靠性设计门限值的确定，从而提出了产品设计过程中保证可靠性指标的实现途径，并为产品的制造验收和使用检测提供了定量依据。

关键词： 可靠性,  蒙特卡洛,  门限值 
[1] Yuchun KUANG,Hui ZHONG,Liangchun ZHONG. Design and research of screw motor with quasi circular-arc contour-pattern[J]. Chinese Journal of Engineering Design, 2023, 30(5): 640-649.
[2] Jianghao LI,Wensheng XIAO,Wentai YU,Hongyan WANG,Shunqing LIU,Youfu SUN. Reliability analysis and allocation research of ultra-deep water pile hammer system[J]. Chinese Journal of Engineering Design, 2023, 30(4): 485-494.
[3] Hongjie GUO,Shuya LIANG,Wenhua CHEN,Liqiang ZHONG,Zhewen CHEN,Jiahui YAN. Research on influence of wire spring inclination angle on storage life of wire spring hole electrical connector[J]. Chinese Journal of Engineering Design, 2023, 30(3): 390-398.
[4] Zheng-feng ZHANG,Xiao-yu SONG,Xiao-lei YUAN,Wen-juan CHEN,Wei-dong ZHANG. Reliability optimization design for crashworthiness of Al/CFRP hybrid thin-walled structure[J]. Chinese Journal of Engineering Design, 2022, 29(6): 720-730.
[5] Jiang LIU,Zheng-ming XIAO,Long-long ZHANG,Wei-biao LIU. Transmission accuracy reliability analysis and parameter optimization of RV reducer considering cycloid gear wear[J]. Chinese Journal of Engineering Design, 2022, 29(6): 739-747.
[6] CHEN Zhen, LI Tao, XUE Xiao-wei, ZHOU Yang, JING Shuang, CHEN Yan. Fatigue reliability analysis and optimization of vibroseis vibrator baseplate based on fuzzy comprehensive evaluation method[J]. Chinese Journal of Engineering Design, 2021, 28(4): 415-425.
[7] WANG Ai-lun, LIU Le, LIU Qing-ya. Research on strength reliability of pull rod combined rotor based on Kriging surrogate model[J]. Chinese Journal of Engineering Design, 2019, 26(4): 433-440.
[8] CUI Guo-hua, CUI Kang-kang, WU Hai-miao, ZHANG Yan-wei, LIU Jian. Reliability analysis for pressing force of prestressed concrete cylinder pipe port grinding robot[J]. Chinese Journal of Engineering Design, 2018, 25(6): 647-654.
[9] XIE Jing-wei, LI Fang, CHEN Tong, YIN Dong-liang. Analysis of cold standby system reliability model considering use and repair priority[J]. Chinese Journal of Engineering Design, 2018, 25(3): 315-320.
[10] WEN Rui-qiao, YANG Meng-ou, LIU Tao, ZHANG Jun-fu. Time-dependent kinematic reliability analysis of robot manipulators[J]. Chinese Journal of Engineering Design, 2018, 25(1): 50-55.
[11] LU Feng-yi, ZHAO Ke-yuan, XU Ge-ning, QI Qi-song. Reliability assessment of small sample based on multiple source information fusion and fuzzy fault tree[J]. Chinese Journal of Engineering Design, 2017, 24(6): 609-617.
[12] ZHANG Gen-bao, XU Fu-wei, RAN Yan, ZHANG Xiao-gang. Research on similarity evaluation and reliability prediction of mechanical structure[J]. Chinese Journal of Engineering Design, 2017, 24(3): 264-272.
[13] CHEN Wen-hua, DU Sheng-li, YANG Fan, PAN Jun, QIAN Ping. Unlocking reliability analysis of the ball locking mechanism for separating electrical connector[J]. Chinese Journal of Engineering Design, 2017, 24(3): 280-285.
[14] YIN Dong-liang, LI Fang, CHEN Tong. Analysis of parallel system reliability model withtwo unitsbased on Phase-type distribution[J]. Chinese Journal of Engineering Design, 2016, 23(2): 130-135.
[15] CHEN Wen-hua, ZHENG Chao-peng, LI Qi-zhi, PAN Jun, HE Qing-chuan, PAN Xiao-dong. Gear reliability analysis of 2.5 MW wind turbine gearboxbased on Copula function[J]. Chinese Journal of Engineering Design, 2015, 22(5): 425-430.