Please wait a minute...
工程设计学报
Chinese Journal of Engineering Design  2005, Vol. 12 Issue (2): 109-112    DOI:
    
Application CFX-BladeGen in modelling turbine blade
 DING  Ling-Yun, FENG  Jin, LIU  Xiao-Guang, ZHANG  Man-Lai
College of Mechanical Engineering, Yangtze University, Jingzhou 434023, China
Download: HTML     PDF(525KB)
Export: BibTeX | EndNote (RIS)      

Abstract  The main component of turbine is made up of stator and rotor, whose function is to transform liquid energy into mechanical energy on the main shaft. CFX-BladeGen is applied to model turbine and then numerical simulation calculation on the obtained model is conducted. The comparison between the result of the above calculation and that of the same type of turbine in bed-performance test indicates that CFX-BladeGen is more convenient and swift to fulfill the modeling request of turbine blade.

Key words： turbine blade      modelling      numerical simulation      CFX-BladeGen     
Published: 28 April 2005
Service
E-mail this article
Add to my bookshelf
Add to citation manager
E-mail Alert
RSS
Articles by authors
DING Ling-Yun
FENG Jin
LIU Xiao-Guang
ZHANG Man-Lai
Cite this article:

DING Ling-Yun, FENG Jin, LIU Xiao-Guang, ZHANG Man-Lai. Application CFX-BladeGen in modelling turbine blade. Chinese Journal of Engineering Design, 2005, 12(2): 109-112.

URL:

https://www.zjujournals.com/gcsjxb/     OR     https://www.zjujournals.com/gcsjxb/Y2005/V12/I2/109


CFX-BladeGen在涡轮叶片造型中的应用

涡轮钻具中的主要元件是由定子和转子组成的涡轮，它的作用是把液体能变为主轴上的机械能。将CFX-BladeGen应用于涡轮钻具叶片的造型，并对生成的模型进行数值模拟计算。计算结果与同类型涡轮钻具台架实验的数据比较表明，CFX-BladeGen可以比较方便、快捷地满足涡轮叶片造型要求。

关键词： 涡轮叶片,  造型,  数值模拟,  CFX-BladeGen 
[1] Chen WANG,Bo GAO,Xu YANG. Lightweight design of Stewart type six-axis force sensor[J]. Chinese Journal of Engineering Design, 2022, 29(4): 419-429.
[2] XIONG Wei, GE Zhi-hua, PANG Qiao, LI Man-di, WANG You. Theoretical design and experimental study on interference of hub bearing unit[J]. Chinese Journal of Engineering Design, 2021, 28(1): 41-47.
[3] ZHANG Yi-cong, ZHU Wei, WU Yu-guo, SHI Li-ping. Numerical simulation of sealing performance of Reuleaux triangular micro-dimpled textured end face[J]. Chinese Journal of Engineering Design, 2020, 27(1): 103-110.
[4] HOU Yong-jun, LI Fen, WU Xian-jin, LIU You-ping. Numerical simulation study of the performance of gas-liquid ejector in negative pressure drilling fluid shale shaker[J]. Chinese Journal of Engineering Design, 2019, 26(4): 423-432.
[5] ZHONG Gong-xiang, ZOU Di, ZHANG Xing. Design and simulation of triangular air-powered rotary enginebased on CFD and ADAMS[J]. Chinese Journal of Engineering Design, 2019, 26(3): 305-314.
[6] ZHANG Xiao-dong, CHEN Long. Research on valve seat cone angle of new inner blowout preventer based on erosion wear theory[J]. Chinese Journal of Engineering Design, 2019, 26(3): 287-298.
[7] LI Shun-ming, WANG Yi-bo, GU Xin-zhong. Energy-saving optimization design of a lawn mower based on flow field analysis[J]. Chinese Journal of Engineering Design, 2018, 25(6): 683-689.
[8] ZHANG Yuan, PENG Zhen-hua, GAO Ding-xiang, REN Hai-tao, TANG Yi-xin. Design and mixing performance research of core tube heavy oil mixing and diluting mixer[J]. Chinese Journal of Engineering Design, 2018, 25(5): 510-517.
[9] DENG Rong, HOU Kai, LI Meng-hua, LI Xiang-dong. Study on rock breaking performance of hybrid single cone bit[J]. Chinese Journal of Engineering Design, 2018, 25(3): 262-269.
[10] GAO Zheng, WANG Lu, GUO Yu-ying. Kinematics analysis of detection device of cable-link wind turbine blades[J]. Chinese Journal of Engineering Design, 2018, 25(2): 188-193.
[11] QIAO Yin-hu, HAN Jiang, ZHANG Chun-yan. Study on suppression of vibration of the piezoelectric plate shell wind turbine blade under voltage[J]. Chinese Journal of Engineering Design, 2017, 24(5): 518-522,529.
[12] XING Meng-long, LIU Jia-xin, LU Chun-guang, JIANG Yan-kun. Improvement and signal-to-noise ratio analysis of cooling fan for grader[J]. Chinese Journal of Engineering Design, 2017, 24(5): 563-571.
[13] ZHANG Lu, WU Peng, WU Da-zhuan, HONG Wei-rong. Study on pressure fluctuation control of a regenerative pump for fuel system[J]. Chinese Journal of Engineering Design, 2017, 24(4): 395-402.
[14] YANG Wei-jie, MENG Wen-jun, WU Si-min, LIU Bao-lin, QI Xiang-dong. Simulation analysis and experimental verification of coal suction characteristics of the new railway tunnel fallen coal dust collection device[J]. Chinese Journal of Engineering Design, 2017, 24(2): 174-181.
[15] XIA Li， WU Peng， WU Da-zhuan. Effects of reflux hole of volute on the performance of self-priming pump[J]. Chinese Journal of Engineering Design, 2015, 22(3): 284-289.