Please wait a minute...
工程设计学报  2010, Vol. 17 Issue (1): 51-54    
工程设计理论、方法与技术     
卫生型离心泵水力性能的参数化研究
 林思达, 吴大转, 王乐勤
浙江大学 化工机械研究所,浙江 杭州 310027
Parameterization study on hydraulic performance of sanitary centrifugal pumps
 LIN  Si-Da, WU  Da-Zhuan, WANG  Le-Qin
Parameterization study on hydraulic performance of sanitary centrifugal pumps
 全文: PDF(3357 KB)   HTML
摘要: 为给卫生型离心泵过流部件结构的优化设计提供依据,采用CFD分析软件Fluent对卫生型离心泵内部流场流动进行了数值模拟和水力性能的参数化分析.给出了建模和流场分析方法,分析了泵内流体速度和压力的分布特性,基于流动模拟结果预测了水力性能.性能预测结果与试验结果吻合较好.关键结构参数对水力性能影响的计算结果表明,叶轮轴向间隙、叶片宽度、叶轮与蜗壳直径比等参数均存在最优值.研究结果对卫生型离心泵的结构改进和性能提高具有参考价值.
关键词: 卫生型离心泵数值模拟性能预测参数化水力性能    
Abstract: To provide references for optimization design of the structure of flow passage components on sanitary centrifugal pumps, the numerical simulation of inner flow and parameterization analysis on the hydraulic performance of sanitary centrifugal pumps were carried out through CFD applications. The modeling method and simulation method on internal flow simulation were introduced. The distribution characteristics of the flow velocity and pressure in the pumps were analyzed, and the hydraulic performance of pumps was predicted based on the flow simulation. The simulation results agree well with the experimental results. The calculation results of the impact of the key structure parameters on the hydraulic performance of pumps indicate that the main parameters such as axial clearance of impeller, vane width and ratio of casing and impeller size have their optimum values. The results provide valuable references for structure and performance improvement of sanitary centrifugal pumps.
Key words: sanitary centrifugal pump    numerical simulation    performance prediction    parametric    hydraulic performance
出版日期: 2010-02-28
:  TH 311  
基金资助:

教育部高校博士点专项科研基金资助项目(20060335084)

服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
林思达
吴大转
王乐勤

引用本文:

林思达, 吴大转, 王乐勤. 卫生型离心泵水力性能的参数化研究[J]. 工程设计学报, 2010, 17(1): 51-54.

LIN Si-Da, WU Da-Zhuan, WANG Le-Qin. Parameterization study on hydraulic performance of sanitary centrifugal pumps[J]. Chinese Journal of Engineering Design, 2010, 17(1): 51-54.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/        https://www.zjujournals.com/gcsjxb/CN/Y2010/V17/I1/51

[1] 熊伟, 葛志华, 庞乔, 李曼迪, 王友. 轮毂轴承单元过盈量理论设计及试验研究[J]. 工程设计学报, 2021, 28(1): 41-47.
[2] 闻霞, 任雯, 赖森财, 曾显杰. 基于有限状态机模型的全自动烫印机控制系统设计[J]. 工程设计学报, 2020, 27(6): 771-780.
[3] 章亦聪, 朱玮, 吴玉国, 时礼平. 莱洛三角形微孔织构化端面密封性能数值模拟[J]. 工程设计学报, 2020, 27(1): 103-110.
[4] 侯勇俊, 李芬, 吴先进, 刘有平. 负压钻井液振动筛气液喷射器性能的数值模拟研究[J]. 工程设计学报, 2019, 26(4): 423-432.
[5] 钟功祥, 邹迪, 张兴. 基于CFD与ADAMS的三角转子气动机设计与仿真[J]. 工程设计学报, 2019, 26(3): 305-314.
[6] 张晓东, 陈龙. 基于冲蚀磨损理论的新型内防喷器阀座锥角研究[J]. 工程设计学报, 2019, 26(3): 287-298.
[7] 刘进文, 任芳, 谢嘉成, 杨兆建. 基于WebGL的刮板输送机链轮参数化设计方法[J]. 工程设计学报, 2019, 26(2): 237-244.
[8] 李舜酩, 王一博, 顾信忠. 基于流场分析的某割草车节能优化设计[J]. 工程设计学报, 2018, 25(6): 683-689.
[9] 张园, 彭振华, 高定祥, 任海涛, 唐一鑫. 芯管式稠油掺稀混合器设计及其掺混性能研究[J]. 工程设计学报, 2018, 25(5): 510-517.
[10] 邓嵘, 侯凯, 李孟华, 李向东. 混合式单牙轮钻头破岩性能研究[J]. 工程设计学报, 2018, 25(3): 262-269.
[11] 张露, 武鹏, 吴大转, 洪伟荣. 燃油系统旋涡泵压力脉动的控制研究[J]. 工程设计学报, 2017, 24(4): 395-402.
[12] 杨伟杰, 孟文俊, 邬思敏, 刘宝林, 齐向东. 新型铁路隧道落煤吸尘装置吸煤特性仿真分析与试验验证[J]. 工程设计学报, 2017, 24(2): 174-181.
[13] 张延强,李秀红,任家骏,谭 彬. WK-75型矿用挖掘机斗齿的磨损分析[J]. 工程设计学报, 2015, 22(5): 493-498.
[14] 夏 丽,武 鹏,吴大转. 蜗壳回流孔对自吸泵性能的影响[J]. 工程设计学报, 2015, 22(3): 284-289.
[15] 朱桂华,马凯,唐啸,高明泉,朱宏斌. 错位桨对污泥固液两相流混合的数值模拟[J]. 工程设计学报, 2015, 22(1): 49-53.