Please wait a minute...
工程设计学报
工程设计学报  2017, Vol. 24 Issue (1): 108-114    DOI: 10.3785/j.issn.1006-754X.2017.01.015
整机和系统设计     
电容器盖板自动预压机及其控制系统设计
郑天池, 郭琳娜, 孙小刚, 邱自学
南通大学 机械工程学院, 江苏 南通 226019
Design of automatic preloading machine and its control system for capacitor cover plate
ZHENG Tian-chi, GUO Lin-na, SUN Xiao-gang, QIU Zi-xue
School of Mechanical Engineering, Nantong University, Nantong 226019, China
 全文: PDF(2486 KB)   HTML
摘要：

针对电容器盖板预压工序存在自动化程度低、劳动强度大等不足，设计了电容器盖板自动预压机及其控制系统.对电容器盖板自动预压机的机械系统进行了详细设计，包括铝壳放置转盘组件、电容器定位组件、盖板预压组件、电容器推出组件、电容器接收组件等；采用可编程序逻辑控制器（programmable logic controller，PLC）作为控制系统的主控制器，实现多种规格电容器盖板的自动预压；依据电容器高度的不同，通过图形操作终端（graphic operating terminal，GOT）设置和调整生产参数.该设备已投入实际生产使用，运行结果表明：整机性能稳定，实际运行状况良好，满足了生产线高柔性化、高效率、高质量的自动化加工要求.
关键词： 电容器;  盖板;  预压机;  控制系统    
Abstract:

According to the existing problems of preloading process for capacitor cover plate such as low automation degree, great labor intensity and so on, the automatic preloading machine and control system of capacitor cover plate were designed. The mechanism system of the automatic preloading machine for capacitor cover plate was designed particularly, including aluminum shell placed turntable component, capacitor positioning component, cover plate preloading component, capacitor push-off component, capacitor receiving component and so on. The PLC was used as the main controller of the control system to realize the automatic preloading for various specifications of the cover plate. Based on different heights of the capacitor, the GOT was used to set and adjust the process parameters. The equipment has been put into practical production and operation, and the operation results show that the whole machine has stable performance and good operating condition, which can meet the requirement of high flexibility, high efficiency and high quality for production line.
Key words: capacitor    cover plate    preloading machine    control system
收稿日期: 2016-05-16 出版日期: 2017-02-28
CLC:  TP23  
基金资助:

江苏省产学研联合创新资金-前瞻性联合研究项目（BY2016053-14）.
通讯作者: 邱自学(1963-),男,江苏南通人,博士,教授,E-mail:qiu.zx@ntu.edu.cn.http://orcid.org//0000-0002-3892-8256     E-mail: qiu.zx@ntu.edu.cn
作者简介: 郑天池(1991-),男,江苏徐州人,硕士生,从事机电一体化装备及测控技术研究,E-mail:876048162@qq.com.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
郑天池
郭琳娜
孙小刚
邱自学

引用本文:

郑天池, 郭琳娜, 孙小刚, 邱自学. 电容器盖板自动预压机及其控制系统设计[J]. 工程设计学报, 2017, 24(1): 108-114.

ZHENG Tian-chi, GUO Lin-na, SUN Xiao-gang, QIU Zi-xue. Design of automatic preloading machine and its control system for capacitor cover plate[J]. Chinese Journal of Engineering Design, 2017, 24(1): 108-114.

链接本文:

https://www.zjujournals.com/gcsjxb/CN/10.3785/j.issn.1006-754X.2017.01.015    或    https://www.zjujournals.com/gcsjxb/CN/Y2017/V24/I1/108

[1] BOTH J. The modern era of aluminum electrolytic capacitors[J]. IEEE Electrical Insulation Magazine, 2015, 31(4):24-34.
[2] 陈永真. 高压电解电容器现状及展望[J]. 电源学报, 2012(5):1-4. CHEN Yong-zhen. Situation and outlook of the high-voltage electrolytic capacitor[J]. Journal of Power Supply, 2012(5):1-4.
[3] HUESGEN T. Thermal resistance of snap-in type aluminum electrolytic capacitor attached to heat sink[J], IEEE Transactions on Industry Applications, 2014, 50(2):1198-1205.
[4] ZHU S Q, BAN C L, TAO X Q, et al. Modelling specific capacitance of DC etched aluminium foil for aluminium electrolytic capacitor[J]. Journal of Materials Science-Materials in Electronics, 2015, 26(9):6750-6756.
[5] 赵勇刚, 梁秋妮, 周庆波. 开关电源用高压铝电解电容器长寿命技术的研究[J]. 电子元件与材料, 2013, 32(7):19-23. ZHAO Yong-gang, LIANG Qiu-ni, ZHOU Qing-bo. Research on long life high voltage aluminum electrolytic capacitor used in switch power supplies[J]. Electronic Components and Materials, 2013, 32(7):19-23.
[6] LEE Y L, OU B L, CHIU Y H. Effect of frequency and current density on ac etching of aluminum electrolytic capacitor foil[J]. Journal of Materials Science:Materials in Electronics, 2007, 18(6):627-634.
[7] KOVACS L, FODOR D, KLUG O, et al. Measurement automation system for aluminum electrolytic capacitor development[J]. IEEE Instrumentation & Measurement Magazine, 2013, 16(3):38-43.
[8] 亓志辉,常冬梅. 组合型铝电解电容器的研制总结[J]. 科技信息, 2012(11):136-136. QI Zhi-hui, CHANG Dong-mei. Development summary of combined aluminum electrolytic capacitor[J]. Science & Technology Information, 2012(11):136-136.
[9] 梁亚芹. 引线式400 V缩体铝电解电容器电解纸选用研究[J]. 电子元件与材料, 2012, 31(5):46-49. LIANG Ya-qin. Electrolytic paper selection for small size 400 V radial aluminum electrolytic capacitor[J]. Electronic Components and Materials, 2012, 31(5):46-49.
[10] PERISSE F, VENET P, ROJAT G, et al. Simple model of an electrolytic capacitor taking into account the temperature and aging time[J]. Electrical Engineering, 2006, 88(2):89-95.
[11] 郁汉琪. 电气控制与可编程序控制器应用技术[M]. 2版.南京:东南大学出版社, 2009:143-144. YU Han-qi. Electrical control and programmable logical controller application technology[M]. 2th ed. Nanjing:Southeast University Press, 2009:143-144.
[12] 马巧红, 李茜, 王孟效, 等. PLC在饮用水深度净化控制系统中的应用[J]. 工程设计学报, 2007, 14(6):486-489. MA Qiao-hong, LI Qian, WANG Meng-xiao, et al. Application of PLC on control system of deep purification of drinking water[J]. Chinese Journal of Engineering Design, 2007, 14(6):486-489.
[13] LAGUNA S G, LOPEZ G M. On the use of alpha-stable distributions in noise modeling for PLC[J]. IEEE Transactions on Power Delivery, 2015, 30(4):1863-1870.
[14] 周芝峰, 周理, 王吉林. 基于PLC的校园照明智能控制系统设计[J]. 工程设计学报, 2010, 17(4):307-311. ZHOU Zhi-feng, ZHOU Li, WANG Ji-lin. Intelligent control design of campus lighting based on PLC[J]. Chinese Journal of Engineering Design, 2010, 17(4):307-311.
[15] 卜英勇, 姚秀超, 李变红. 基于PLC的锅炉清灰装置自动控制系统设计[J]. 仪表技术与传感器,2013(7):71-73. BU Ying-yong, YAO Xiu-chao, LI Bian-hong. Design of boiler deashing device automatic control system on PLC[J]. Instrument Technique and Sensor, 2013(7):71-73.
[16] HABA C G. Extending the use of plc simulator software in student laboratory works[J]. Advances in Electrical and Computer Engineering, 2010, 10(1):84-89.
[17] 邱自学, 毛建, 姚兴田, 等. 电容器绝缘套管自动烫印裁切一体机设计[J]. 机械设计与制造, 2006(9):83-85. QIU Zi-xue, MAO Jian, YAO Xing-tian, et al. Development of automatic heat printing and cutting machine for insulating sleeve of capacitor[J]. Machinery Design & Manufacture, 2006(9):83-85.
[18] 姚兴田, 邱自学, 毛建, 等. 电容器垫片自动印字机控制系统的研制[J]. 制造业自动化, 2011, 33(6):109-111. YAO Xing-tian, QIU Zi-xue, MAO Jian, et al. Design of control system on automatic stamping equipment for capacitor gasket[J]. Manufacturing Automation, 2011, 33(6):109-111.
[1] 谷树伟,陈凯,宋亚新,于明生,刘治翔,邹康. 掘锚一体机机载式探放水钻机控制系统的设计[J]. 工程设计学报, 2022, 29(6): 776-783.
[2] 谭鑫平,甘浪,林成旭,李雪梅,李倩,闫旺,陈刚,廖广兰,刘智勇. 基于STM32的全自动病理染色控制系统的设计与实现[J]. 工程设计学报, 2022, 29(4): 510-518.
[3] 王春霖,刘畅,杨华,覃鸿,陈国柱. 用于油气勘探的电代油驱动装置系统设计与分析[J]. 工程设计学报, 2022, 29(2): 220-230.
[4] 张泽, 陈勇, 李光鑫, 雷勇敢, 阮鸥, 王再宙. 电动汽车变速器电液控制系统总成设计及结构优化[J]. 工程设计学报, 2021, 28(3): 335-343.
[5] 郑华林, 杨舜波, 潘盛湖, 王超. 百叶片定长切料-自动排片控制系统研究[J]. 工程设计学报, 2019, 26(4): 461-468.
[6] 曹冠, 陆观, 邱自学, 孙小刚, 夏永平, 庄超. 钢帘线残余扭转在线监测及自动消除控制系统设计[J]. 工程设计学报, 2018, 25(4): 481-487,494.
[7] 谢苗, 闫江龙, 毛君, 李翠, 刘一柱. 智能立体停车位液压控制系统分析[J]. 工程设计学报, 2017, 24(3): 337-342.
[8] 郑天池, 孙小刚, 郭琳娜, 邵建新, 邱自学. 电容器铝壳自动上料-定量灌胶控制系统设计[J]. 工程设计学报, 2016, 23(6): 620-625.
[9] 郑天池, 邵建新, 郭琳娜, 孙小刚, 张军, 邱自学. 铝电解电容器芯包引脚刺孔机控制系统设计[J]. 工程设计学报, 2016, 23(4): 378-384.
[10] 毛 君，杨振华，卢进南，谢 苗. 迈步式超前支护装备过渡过程支撑力控制系统设计[J]. 工程设计学报, 2015, 22(5): 387-393.
[11] 毛 君，杨振华，卢进南，谢 苗. 迈步式超前支护装备过渡过程支撑力控制系统设计[J]. 工程设计学报, 2015, 22(4): 387-393.
[12] 李国娟,卿启湘,刘 杰. 薄片工件振动筛排序分析及结构优化设计[J]. 工程设计学报, 2014, 21(4): 348-354.
[13] 杨 旭，龚国芳，杨华勇*，陈 馈，王林涛. 管片拼装试验台回转电液控制系统设计及试验分析[J]. 工程设计学报, 2014, 21(2): 180-184.
[14] 雷飞，杨红波. 基于模糊控制的商用车驾驶室悬置有限带宽主动控制系统研究[J]. 工程设计学报, 2014, 21(1): 32-37.
[15] 杨旭, 龚国芳, 杨华勇, 陈馈, 王林涛. 盾构管片拼装试验台监控系统设计[J]. 工程设计学报, 2013, 20(6): 534-538.